Still having a hard time wrapping my head around not having a factory drag clicker in this day and age, I refuse to add a Chinese manufactured part to a JDM masterpiece. Perhaps Sagisi will corner the market with one of his creations. It's a matter of R.O.I. as well for Ryan, mostly the time and ef...

one of these days if i have the energy and time i’ll make a giant cross reference spread sheet of all daiwa/shimano parts numbers for bearings sizes, what company they’re made by, and any additional notes about said specific bearing. A lot of that information was on the Daiwa Tuning Data Repository...

Hard pass for me, as much as I enjoy Daiwa and really love the OG Z2020/Z200. Also, it appears that there is only about 90 minutes of power reserve/700 casts. Here's a copy and paste of my input on the IMZ and comparison and contrast to an electric auto flushing toilet: In regards to electric toilet...

HellaBread wrote: ↑

Fri Jan 19, 2024 3:30 pm

I have a few spare nmb 5x8x2.5 bearings on hand if you can’t find any

I'll send you a PM.

HellaBread wrote: ↑

Fri Jan 19, 2024 3:40 pm

stuff like this is where investing in cheap digital calipers is worth having around

Yessir, that's what I'm ordering next from Amazon. Lol.

I just received a very nice TDZ 103ML from Japan...main and pinion gear looks to be very clean and little use (as does the reel). While cranking with various spools, it feels as if the pinion bearings need replacement. I did grease the bearing under the drive shaft, but haven't checked the pinion g...

Driveshaft bearing and both upper and lower pinion bearings checked out good, and I applied bearing grease to all of them. It might be the gears?

I just received a very nice TDZ 103ML from Japan...main and pinion gear looks to be very clean and little use (as does the reel). While cranking with various spools, it feels as if the pinion bearings need replacement. I did grease the bearing under the drive shaft, but haven't checked the pinion g...

I just received a very nice TDZ 103ML from Japan...main and pinion gear looks to be very clean and little use (as does the reel). While cranking with various spools, it feels as if the pinion bearings need replacement. I did grease the bearing under the drive shaft, but haven't checked the pinion ge...

https://youtu.be/XnflhlnCi2k?si=Ldd-RedZpRiyg9u- This Shimano rep has all the jargon and lexicons down... professional use of superfluous corporate verbiage. He is an astute student of Shimano marketing. Still, I have too many fishing acquaintances here with the SLX reels and after 1-2 seasons, I'm...

https://youtu.be/XnflhlnCi2k?si=Ldd-RedZpRiyg9u- This Shimano rep has all the jargon and lexicons down... professional use of superfluous corporate verbiage. He is an astute student of Shimano marketing. Still, I have too many fishing acquaintances here with the SLX reels and after 1-2 seasons, I'm...

Good to know that is seems to be a quality line. I'm always wary when a certain type of company (in this case rod builder) magically develops and brings to market a new product. Did they slap together a PE factory, or are they outsourcing and if so where and with whom? Questions I always like to kn...

This is one helluva good quality line. I'm running 30 on my Steez A HLC 6.3 paired with a custom Otterod MHX CB907 for 5/8-1.25 oz moving baits like lipless, topwaters, chatters, wakes, buzzbaits. The 10lb is very thin, excellent body/form, casts great and is strong and quiet. I have it on a Daiwa B...

BassKat wrote: ↑

Tue Jan 16, 2024 8:20 am

Thanks, really great thread on spiral wrapping!

Yeppers, it's a fun and enlightening read.

My apologies if this goes in a different forum. Wasn’t sure. Wondering what bearing oil are you using for Shimano reels. I used to use yellow rocket fuel but I’m running low. What’s the standard out there currently. Thanks. An oldie but goodie reference chart: http://www.tackletour.net/viewtopic.ph...