Skipping with baitcasters.
-
- Pro Angler
- Posts: 1913
- Joined: Thu Jun 27, 2013 11:32 am
Re: Skipping with baitcasters.
If you have a Shimano reel with VBS (not sure about how to do w/ SVS infinity), you really need to give this a shot! I use a cu101d and it works great.
1 Use a lure that would skip nicely (arkie jig+ trailer, t-rig craw or beaver, chatterbait w/ trailer, etc)
2 Put 4 of the brake shoes in the on/out position (distance is sufficient even with 4 brakes on, trust me)
3 Loosen the spool tension knob so the spool can just slightly go side to side.
4 Cast. You will find that it is VERY easy and controllable. I, through habit, put tension on the spool throughout the cast with my thumb, but I honestly don't think you would need to thumb.
I know some of you are concerned with distance, but if you do this right, you can easily skip 10 - 25 feet. I was just at a local pond (doesn't have any fish in it, but I practice skipping and cast for fun here) and I could get 20+ feet if I managed to get the cast right. I like to do a circle cast, and let go of the lure as the rod is about a half foot or less above the water, and then I follow through as the lure skips. Just give it a try; you will be amazed at the ease.
If you are just starting out at skipping, and are having a bit of trouble, just put on 5 or 6 brake shoes and cast over and over until your thumb gets a good feel of how much pressure to put on the spool. Good luck. Please tell me how this works out for those of you that try this. I think you will find it very easy.
1 Use a lure that would skip nicely (arkie jig+ trailer, t-rig craw or beaver, chatterbait w/ trailer, etc)
2 Put 4 of the brake shoes in the on/out position (distance is sufficient even with 4 brakes on, trust me)
3 Loosen the spool tension knob so the spool can just slightly go side to side.
4 Cast. You will find that it is VERY easy and controllable. I, through habit, put tension on the spool throughout the cast with my thumb, but I honestly don't think you would need to thumb.
I know some of you are concerned with distance, but if you do this right, you can easily skip 10 - 25 feet. I was just at a local pond (doesn't have any fish in it, but I practice skipping and cast for fun here) and I could get 20+ feet if I managed to get the cast right. I like to do a circle cast, and let go of the lure as the rod is about a half foot or less above the water, and then I follow through as the lure skips. Just give it a try; you will be amazed at the ease.
If you are just starting out at skipping, and are having a bit of trouble, just put on 5 or 6 brake shoes and cast over and over until your thumb gets a good feel of how much pressure to put on the spool. Good luck. Please tell me how this works out for those of you that try this. I think you will find it very easy.
-
- Pro Angler
- Posts: 1980
- Joined: Wed Jan 25, 2012 3:49 pm
- Location: Townsville, QLD. Australia
- Contact:
Re: Skipping with baitcasters.
SPOT ON!Afrayedknot wrote:If you have a Shimano reel with VBS (not sure about how to do w/ SVS infinity), you really need to give this a shot! I use a cu101d and it works great.
1 Use a lure that would skip nicely (arkie jig+ trailer, t-rig craw or beaver, chatterbait w/ trailer, etc)
2 Put 4 of the brake shoes in the on/out position (distance is sufficient even with 4 brakes on, trust me)
3 Loosen the spool tension knob so the spool can just slightly go side to side.
4 Cast. You will find that it is VERY easy and controllable. I, through habit, put tension on the spool throughout the cast with my thumb, but I honestly don't think you would need to thumb.
I know some of you are concerned with distance, but if you do this right, you can easily skip 10 - 25 feet. I was just at a local pond (doesn't have any fish in it, but I practice skipping and cast for fun here) and I could get 20+ feet if I managed to get the cast right. I like to do a circle cast, and let go of the lure as the rod is about a half foot or less above the water, and then I follow through as the lure skips. Just give it a try; you will be amazed at the ease.
If you are just starting out at skipping, and are having a bit of trouble, just put on 5 or 6 brake shoes and cast over and over until your thumb gets a good feel of how much pressure to put on the spool. Good luck. Please tell me how this works out for those of you that try this. I think you will find it very easy.
That's the best description in words I've read, I filmed a short clip doing that but with a write up like that…there's no point uploading. Just about the only thing I can add is keeping the rod tip slightly up…and short senkos on mosquito guards work great as do spinner baits with a flatter bottomed head. On a mag 3d reel I found dial on 10 max brakes will make it effortless, normal 10 gets optimal distance.
Awesome description Afrayedknot!
Re: Skipping with baitcasters.
Just look at this video it will demonstrate how to set brakes and tension control
Its the best I have seen as far as explanation
http://youtu.be/sevXix_46xw
Its the best I have seen as far as explanation
http://youtu.be/sevXix_46xw
-
- Pro Angler
- Posts: 1913
- Joined: Thu Jun 27, 2013 11:32 am
Re: Skipping with baitcasters.
That guys sounds like Dennis Braid.Pegasus wrote:Just look at this video it will demonstrate how to set brakes and tension control
Its the best I have seen as far as explanation
http://youtu.be/sevXix_46xw
Thanks. I am not very good at skipping but I just found that technique to be easier then what I had done before. Haven't tried mag 3d yet though.Mcyl wrote:SPOT ON!
That's the best description in words I've read, I filmed a short clip doing that but with a write up like that…there's no point uploading. Just about the only thing I can add is keeping the rod tip slightly up…and short senkos on mosquito guards work great as do spinner baits with a flatter bottomed head. On a mag 3d reel I found dial on 10 max brakes will make it effortless, normal 10 gets optimal distance.
Awesome description Afrayedknot!
Re: Skipping with baitcasters.
I find that using rods with micro guides to be more accurate and precise when skipping around docks. One tip I can give is to focus mainly on thumb control and don't worry so much about spool tension and braking. You want the line to come off the reel effortlessly or your actually going to be working against yourself. Just my experience.
-
- Pro Angler
- Posts: 1980
- Joined: Wed Jan 25, 2012 3:49 pm
- Location: Townsville, QLD. Australia
- Contact:
Re: Skipping with baitcasters.
Months ago I thought there was a magic setting, magic bait or magic way of casting to achieve a good skip. When I got results I wanted I noted it down and skipped for the sake of skipping. Then when I was actually fishing I had a setup just for skipping.
After a while I found other settings, baits and casting techniques worked. Now if I'm holding a rod with a jig, spinnerbait or small SP Swimbait and there is overhang I skip whatever I'm holding under it.
I kinda found that there is no tune...it's the angler that gets in tune with it.
After a while I found other settings, baits and casting techniques worked. Now if I'm holding a rod with a jig, spinnerbait or small SP Swimbait and there is overhang I skip whatever I'm holding under it.
I kinda found that there is no tune...it's the angler that gets in tune with it.
Re: Skipping with baitcasters.
The pros make Skipping look so easy!
@ 4:30
http://www.tacklewarehouse.com/vlogpage ... de=VLOG267
@ 2:30
http://www.tacklewarehouse.com/vlogpage ... de=VLOG266
@ 4:30
http://www.tacklewarehouse.com/vlogpage ... de=VLOG267
@ 2:30
http://www.tacklewarehouse.com/vlogpage ... de=VLOG266
Re: Skipping with baitcasters.
what about with a reel like the scorpion with svs brakes?
-
- Pro Angler
- Posts: 1980
- Joined: Wed Jan 25, 2012 3:49 pm
- Location: Townsville, QLD. Australia
- Contact:
Re: Skipping with baitcasters.
If one relies on casting brakes to skip. SVS will require more fine tuning than VBS.goldrod wrote:what about with a reel like the scorpion with svs brakes?
VBS...I dunno why the bothered with 6. Just make the thing with 2
Re: Skipping with baitcasters.
Let’s bring this post back from the dead.
I finally learned how to skip (unweighted worm) a while back with my 16 Aldebaran BFS XG. I was excited to say the least. I learned how to skip in my pool. What I didn’t anticipate is skipping in a pool ain’t even close to skipping in a drifting boat in choppy water.
Skipping has it’s place but it’s just not that big of a deal anymore because I don’t fish many docks.
I finally learned how to skip (unweighted worm) a while back with my 16 Aldebaran BFS XG. I was excited to say the least. I learned how to skip in my pool. What I didn’t anticipate is skipping in a pool ain’t even close to skipping in a drifting boat in choppy water.
Skipping has it’s place but it’s just not that big of a deal anymore because I don’t fish many docks.
Re: Skipping with baitcasters.
John G wrote: ↑Tue May 26, 2020 4:33 amLet’s bring this post back from the dead.
I finally learned how to skip (unweighted worm) a while back with my 16 Aldebaran BFS XG. I was excited to say the least. I learned how to skip in my pool. What I didn’t anticipate is skipping in a pool ain’t even close to skipping in a drifting boat in choppy water.
Skipping has it’s place but it’s just not that big of a deal anymore because I don’t fish many docks.
I don’t fish many docks as well
If I were tournament fishing I believe I’d have a line sponsor so i could spend a day just skipping docks and getting better. My skills currently are hit and miss
As in when I cast I may miss that one dock leg or I may hit it.
I saw a guy skip a lure with an antares 70 and was blown out of my socks. He did it while turning his head away from the over hang just to look at me.
Skipping when done right looks very effortless. I love to watch JBF skip on their blogs
For by him were all things created, that are in heaven, and that are in earth, visible and invisible
Re: Skipping with baitcasters.
I agree on watching skipping videos of people that really know what they are doing. I will say that I have caught a grand total of 1 LM Bass when skipping a dock. LOL
I was really proud of myself when I did it.