Ryoga SV1016
-
- Elite Angler
- Posts: 420
- Joined: Tue Jul 01, 2014 12:28 am
Ryoga SV1016
Dont know how to post the link. Daiwa South East Asia have a Red Ryoga SV 1016 coming to market. May just be a teaser, but looks pretty good. Pricey tho.
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
- GOOD YEAR 71
- Elite Angler
- Posts: 553
- Joined: Tue Apr 08, 2014 5:07 pm
- Location: NorCal
Re: Ryoga SV1016
7.1.1 gear ratio?! My mars needs this gear set.
-
- Elite Angler
- Posts: 456
- Joined: Sat Dec 12, 2015 6:30 am
Re: Ryoga SV1016
Smart to bring back the Ryoga.
Re: Ryoga SV1016
$707 USD?
I'm sure it's a great reel, but that colour scheme and handle make it look like a cheap ABU C3 or one of their even cheaper versions! The old siver ones looked the part, the LIN reels really look the part, but for $700 they really need to try a bit harder!
I'm sure it's a great reel, but that colour scheme and handle make it look like a cheap ABU C3 or one of their even cheaper versions! The old siver ones looked the part, the LIN reels really look the part, but for $700 they really need to try a bit harder!
-
- Elite Angler
- Posts: 456
- Joined: Sat Dec 12, 2015 6:30 am
Re: Ryoga SV1016
If you look at the original prices of the 1016 and 2020 they were not far off that price point .Tim Kelly wrote:$707 USD?
I'm sure it's a great reel, but that colour scheme and handle make it look like a cheap ABU C3 or one of their even cheaper versions! The old siver ones looked the part, the LIN reels really look the part, but for $700 they really need to try a bit harder!
Now you can find new for $400 ( including the Shrapnel) so we should not expect to be paying $700 for too exceptionally long .
Re: Ryoga SV1016
I you really want a $700 red Ryoga you pick up a NIB LIN10 Mars for the same money or less.
Re: Ryoga SV1016
I'm pretty sure that's Singapore dollars. It's about $500 USD.Tim Kelly wrote:$707 USD?
I'm sure it's a great reel, but that colour scheme and handle make it look like a cheap ABU C3 or one of their even cheaper versions! The old siver ones looked the part, the LIN reels really look the part, but for $700 they really need to try a bit harder!
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Ryoga SV1016
Checks out in the exchange rate.bigreddog wrote:I'm pretty sure that's Singapore dollars. It's about $500 USD.Tim Kelly wrote:$707 USD?
I'm sure it's a great reel, but that colour scheme and handle make it look like a cheap ABU C3 or one of their even cheaper versions! The old siver ones looked the part, the LIN reels really look the part, but for $700 they really need to try a bit harder!
IG @hobie_wan_kenobi_fishing
Re: Ryoga SV1016
So would I be right in assuming that the gear set would fit in my slower Ryoga, if it is ever available by it's self?
-
- Angler
- Posts: 13
- Joined: Tue Nov 15, 2016 11:44 am
Re: Ryoga SV1016
I'm from SG
One of our local tackle pre-ordering it for SGD$600+
One of our local tackle pre-ordering it for SGD$600+
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Ryoga SV1016
For those wanting faster gears i have commented in another post here somewhere.
The Catalina 100/200SH gears can be modified to fit and gives you a 7.3:1 ratio.
i have a set in my black ryoga and are going very well.
the modification is the catalina main gear needs the hole in the centre bored out from 8mm to 10mm to suit the ryoga drive shaft. Thats all that is needed then the gears install with no further mods. The gears are available in right and left hand .
to order you just email PLAT for the part number as the catalina bj is not listed in the parts order section.
The Catalina 100/200SH gears can be modified to fit and gives you a 7.3:1 ratio.
i have a set in my black ryoga and are going very well.
the modification is the catalina main gear needs the hole in the centre bored out from 8mm to 10mm to suit the ryoga drive shaft. Thats all that is needed then the gears install with no further mods. The gears are available in right and left hand .
to order you just email PLAT for the part number as the catalina bj is not listed in the parts order section.
Re: Ryoga SV1016
Thanks for the tip.BARRAMANIAC wrote:For those wanting faster gears i have commented in another post here somewhere.
The Catalina 100/200SH gears can be modified to fit and gives you a 7.3:1 ratio.
i have a set in my black ryoga and are going very well.
the modification is the catalina main gear needs the hole in the centre bored out from 8mm to 10mm to suit the ryoga drive shaft. Thats all that is needed then the gears install with no further mods. The gears are available in right and left hand .
to order you just email PLAT for the part number as the catalina bj is not listed in the parts order section.