Shattered my P3 Bearing Down
Shattered my P3 Bearing Down
I was putting some cork grips on a Mb Lauda mounted on a phase 3 bearing down...the rod fell over and slapped against the wood floor, the tip shattered and the rod is about an inch and a half shorter, such a sad day
- bronzefly
- Pro Angler
- Posts: 5036
- Joined: Wed May 16, 2007 5:21 pm
- Location: www.tackletrap.com
- Contact:
Re: Shattered my P3 Bearing Down
That's painful for sure, sorry for your loss!!
www.tackletrap.com
facebook.com/tackletrap
facebook.com/tackletrap
Re: Shattered my P3 Bearing Down
super chitty!! Hope you are able to find a replacement bradda! Thought I saw a couple for sale recently?
- papabassin
- Elite Angler
- Posts: 614
- Joined: Thu Sep 29, 2016 1:02 am
Re: Shattered my P3 Bearing Down
Ouch. My condolences, man. Hope you can find a new one!
Re: Shattered my P3 Bearing Down
So sorry man. Check the bbc boards too. It seems like a lot of great rods were posted in recent months and some definitely made it there and not here and vice versa. I don't remember where I saw some of them anymore. There definitely was a P3 bearing down somewhere. P3 was/is a great set of sticks; hope you find one soon or a worthy replacement.
Re: Shattered my P3 Bearing Down
Thanks guys, keep your babies safe, its painful
- 389Maverick
- Platinum Angler
- Posts: 1458
- Joined: Mon Apr 23, 2012 6:15 pm
- Location: Quebec, Canada
Re: Shattered my P3 Bearing Down
How dare you put your baby on the table without strapping him down!
Might just need to report this post to Rod Services.
P.S. sorry for your loss!
Might just need to report this post to Rod Services.
P.S. sorry for your loss!
Canadian arm to what is Megabass of America
Instagram @m.a.dufour
Instagram @m.a.dufour
Re: Shattered my P3 Bearing Down
Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
Re: Shattered my P3 Bearing Down
Did they replace it on warranty, or did you have to just bite the bullet and but another one?ayo8 wrote: Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Shattered my P3 Bearing Down
Thanks for the heads up.ayo8 wrote: Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
That really illustrates the dangers of housework!
Re: Shattered my P3 Bearing Down
Wow. That's one heluva way for a rod to go. Death by vacuum cleaner.ayo8 wrote: Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
Re: Shattered my P3 Bearing Down
it was replaced under warranty. I would have took the loss and bought me another Wht Python if I didn't have warranty.j2015 wrote:Did they replace it on warranty, or did you have to just bite the bullet and but another one?ayo8 wrote: Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
is there any other MB rod you're interested in to replace your P3 BD? Or do you want to get another one?
Re: Shattered my P3 Bearing Down
mark poulson wrote:
Thanks for the heads up.
That really illustrates the dangers of housework!
Yeah, stupid meLowRange wrote: Wow. That's one heluva way for a rod to go. Death by vacuum cleaner.
Re: Shattered my P3 Bearing Down
I am open to suggestions, the bearing down was a great light jig rod but I felt the tip was just slightly stiff. I might look into getting the stinger tip version.ayo8 wrote:it was replaced under warranty. I would have took the loss and bought me another Wht Python if I didn't have warranty.j2015 wrote:Did they replace it on warranty, or did you have to just bite the bullet and but another one?ayo8 wrote: Sorry for the unfortunate mishap.
Every time i work on my reels it comes off the rod. Just say'n.
Dont feel too bad. I was vacuuming near my rod stand a few years ago and braid got caught on the 12amp roller. That extra braid laying on the floor was connected to one of my new MB c40's. The white python didn't stand a chance, LOl. I was fortunate my local MB store (The hookup tackle) helped me get it replaced - being still in production at the time.
is there any other MB rod you're interested in to replace your P3 BD? Or do you want to get another one?
Re: Shattered my P3 Bearing Down
Personally, I like ex fast tips when jig and worming, except for drop shot's - which I like a slightly softer tip.j2015 wrote:
I am open to suggestions, the bearing down was a great light jig rod but I felt the tip was just slightly stiff. I might look into getting the stinger tip version.
I really enjoy my BD X7 stinger for finesse jig and worming; it would be a great replacement, and or the X7 super elsiel. Thats if you prefer Mb rods, but Im sure there's plenty of other great rods to fit your application.