High end Jdm cranking rod help

This is the place to talk shop about all the enthusiast and import tackle for the truly afflicted
domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Tue Mar 05, 2019 9:26 pm

RISE wrote:
domthewon wrote:
RISE wrote:
domthewon wrote:
Winstondry wrote:If you can find one, a TDZ-103 Personal Order in white my look nice on that rod, Dom! That's a sweet rod, I'm looking for another crankbait stick myself and your photos of the White Falcon has piqued my interest!
Thanks. I wish my pics were better quality, but it’s better than nothing. Much nicer rod in person. The main shaft changes different shades of bone white in different light (like when the sun was out, and when clouds came over) , but the guide wraps are bright white at all times. I never thought I would buy a white rod, but I really like the looks of the bone with contrasting bright white a lot. The purple accents are a little different color than any of my other purple accented parts, but really scream Jdm rod :lol: The black threads above the lockdown nut are noticeable with my grip, but didn’t bother me or my buddy when throwing baits(gonna be personal preference). He hates glass rods, but admits this one is a lot of fun. I didn’t see him pick his up except to remove the crank he had on and put it on the falcon. He prefers ripping traps through grass with a composite rod most of the time. Once he started machine gun casting a Squarebill down the bank rapid fire he said the rod did so much of the work for him his casting arm felt less fatigue because he only had to move a small amount to make a very accurate cast, and felt like he was able to make more casts which impressed me. I let him fish it for most of the morning with 12 lb sniper and a decoy snap switching baits and colors while I was pitching baits on the new steez’ all day. the reaction wasn’t hitting, and he wanted to start catching fish too and put it down. On another note I wish you didn’t mention a white PO though :lol: Searching for one in lefty would drive me insane. I’d probably be easier to make a tdz to match out of elephant tusk, although not quite as humane. I know if I get one painted I won’t fish it.
Here are a few pics, sorry for the delay...Agreed, love how the bright white wraps pop from the antique white blank of the Falcon. I also NEVER thought I'd buy a white rod, but this one is truly special. Funny you brought up a white PO to go on the rod, as the PO paint is a match made in heaven for this stick. I was going to build one of the two I own to mate up with the White Falcon, but my brotha-from-anotha-motha said he would dis-own me if I "molested one of those unicorns"... [-X :( :lol: Couldn't bring myself to do it, as they are NIB. Instead, I built the white, Calfish-painted HLC I own to go with the Falcon. Utilizing a tuned IP79 spool, IP68 Drag Star, IS79 CCC, HH Black screw set/Mag Dial screw, DR nose piece, I'ze 90mm, YT Fusion Bearings, Carbontex, OGs, SLP works retainer, Ito retainer screw, etc... The Cristobal Ltd is paired with a new (for now) Hedgehog/Bespoke Knobs, MB Zonda HC spool, 80mm CF, HH Drag Star, blah, blah, blah. The Lion Hearts are paired with Z's/Ltd hand-striped K.T.F. 98mm SC handles. Bloody is paired with another modded Zonda for now (Steez CT on the way for it), and Hooligan is paired with a Steez SV TW XH.


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Amazing!!! All of it. Well thought out and matched beautifully. I don’t think I could bring myself to fish those perfect white Po’s either. Thanks for posting those pics. I think I want another sedition now.
You know what you must do.... :evil22:
Fishing my Falcon, and your bad@5$ line of rods inspirered me. I went and bought the hooligan. I had to know what a Sedition bottom contact rod is all about. Should be here later this week.

User avatar
Teal101
TT Moderator
TT Moderator
Posts: 4884
Joined: Thu Jul 14, 2011 5:59 am
Location: Central Washington
Contact:

Re: High end Jdm cranking rod help

Post by Teal101 » Wed Mar 06, 2019 9:00 am

Someones a straight baller =D> =D> =D>
I like TD-Z's
Instagram: teal_101_jdm

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4800
Joined: Wed Jun 15, 2016 9:18 am

Re: High end Jdm cranking rod help

Post by LowRange » Wed Mar 06, 2019 12:08 pm

I was unprepared for the level of awesomeness that is in this crankbait rod thread.

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Wed Mar 06, 2019 12:45 pm

Teal101 wrote:Someones a straight baller =D> =D> =D>
No no no. Just an enthusiast. :lol:

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Wed Mar 06, 2019 12:49 pm

LowRange wrote:I was unprepared for the level of awesomeness that is in this crankbait rod thread.
Right on! I didn’t know where this journey into the Jdm underground would take me when posted, but it’s been fun and a learning experience in many ways. I appreciate everyone who’s posted and helped me along the way.

Polkfish1
Platinum Angler
Platinum Angler
Posts: 808
Joined: Fri Dec 23, 2016 4:58 pm

Re: High end Jdm cranking rod help

Post by Polkfish1 » Wed Mar 06, 2019 4:13 pm

domthewon wrote:
LowRange wrote:I was unprepared for the level of awesomeness that is in this crankbait rod thread.
Right on! I didn’t know where this journey into the Jdm underground would take me when posted, but it’s been fun and a learning experience in many ways. I appreciate everyone who’s posted and helped me along the way.

Dom:

I applaud your enthusiasm. I see there are only 4 left now. Please share any info you can regarding the taper after you have a chance to put a bend in it. I’m hoping to get a bit to of a clue before jumping in myself. Thanks in advance.

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Thu Mar 07, 2019 6:20 am

Polkfish1 wrote:
domthewon wrote:
LowRange wrote:I was unprepared for the level of awesomeness that is in this crankbait rod thread.
Right on! I didn’t know where this journey into the Jdm underground would take me when posted, but it’s been fun and a learning experience in many ways. I appreciate everyone who’s posted and helped me along the way.

Dom:

I applaud your enthusiasm. I see there are only 4 left now. Please share any info you can regarding the taper after you have a chance to put a bend in it. I’m hoping to get a bit to of a clue before jumping in myself. Thanks in advance.
I’m not sure how rare, limited, or even what this rod is made of besides the torzite guides. What I do know is this rod is going to have to be damn good to earn a spot in my starting lineup for bottom contact. I will definitely hook you up with the details when it comes in though.

RISE
Elite Angler
Elite Angler
Posts: 469
Joined: Mon Oct 21, 2013 5:01 pm
Location: California

Re: High end Jdm cranking rod help

Post by RISE » Thu Mar 07, 2019 12:54 pm

The Hooligan is quite a stout rod, and has a unique taper. If you look at the pic closely, you'll notice that there is a small section of the tip that does not have much transition within it, and then the fast-ish taper starts into backbone. I'd like to call it a "dual taper", but it's really not. Can easily be mistaken for a slower taper, but play with it when you get it, you'll see that it is "different" for a bottom contact rod. BTW...It handles the upper end of the ratings nicely. I will say this...and not that it matters to me, because I don't base a rod's performance on balance point at all, but...I was surprised by the fact that it is just the tiniest bit tip-heavy. Especially being that it is only a 6'9' rod. It will take a lot to de-throne any of my favorite bottom contact sticks, but if everything works out...I will have it on the water next week to find out if it's capable of doing so.
Image
Last edited by RISE on Thu Mar 07, 2019 9:25 pm, edited 2 times in total.

Polkfish1
Platinum Angler
Platinum Angler
Posts: 808
Joined: Fri Dec 23, 2016 4:58 pm

Re: High end Jdm cranking rod help

Post by Polkfish1 » Thu Mar 07, 2019 3:08 pm

[quote="RISE"]The Hooligan is quite a stout rod, and has a unique taper. If you look at the pic closely, you'll notice that there is a small section of the tip that does not have much transition within it, and then the fast-ish taper starts into backbone. I'd like to call it a "duel taper", but it's really not. Can easily be mistaken for a slower taper, but play with it when you get it, you'll see that it is "different" for a bottom contact rod. BTW...It handles the upper end of the ratings nicely. I will say this...and not that it matters to me, because I don't base a rod's performance on balance point at all, but...I was surprised by the fact that it is just the tiniest bit tip-heavy. Especially being that it is only a 6'9' rod. It will take a lot to de-throne any of my favorite BC sticks, but if everything works out...I will have it on the water next week to find out if it's capable of doing so.
Image[/quote

Thanks so much. This is more description than I had hoped for. Could not have shown the taper better and very intriguing indeed. I’m hooked.

RISE
Elite Angler
Elite Angler
Posts: 469
Joined: Mon Oct 21, 2013 5:01 pm
Location: California

Re: High end Jdm cranking rod help

Post by RISE » Thu Mar 07, 2019 9:29 pm

Polkfish1 wrote:
RISE wrote:The Hooligan is quite a stout rod, and has a unique taper. If you look at the pic closely, you'll notice that there is a small section of the tip that does not have much transition within it, and then the fast-ish taper starts into backbone. I'd like to call it a "duel taper", but it's really not. Can easily be mistaken for a slower taper, but play with it when you get it, you'll see that it is "different" for a bottom contact rod. BTW...It handles the upper end of the ratings nicely. I will say this...and not that it matters to me, because I don't base a rod's performance on balance point at all, but...I was surprised by the fact that it is just the tiniest bit tip-heavy. Especially being that it is only a 6'9' rod. It will take a lot to de-throne any of my favorite BC sticks, but if everything works out...I will have it on the water next week to find out if it's capable of doing so.
Image[/quote

Thanks so much. This is more description than I had hoped for. Could not have shown the taper better and very intriguing indeed. I’m hooked.
You're very welcome. Glad I could help.

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Thu Mar 07, 2019 11:22 pm

RISE wrote:
Polkfish1 wrote:
RISE wrote:The Hooligan is quite a stout rod, and has a unique taper. If you look at the pic closely, you'll notice that there is a small section of the tip that does not have much transition within it, and then the fast-ish taper starts into backbone. I'd like to call it a "duel taper", but it's really not. Can easily be mistaken for a slower taper, but play with it when you get it, you'll see that it is "different" for a bottom contact rod. BTW...It handles the upper end of the ratings nicely. I will say this...and not that it matters to me, because I don't base a rod's performance on balance point at all, but...I was surprised by the fact that it is just the tiniest bit tip-heavy. Especially being that it is only a 6'9' rod. It will take a lot to de-throne any of my favorite BC sticks, but if everything works out...I will have it on the water next week to find out if it's capable of doing so.
Image[/quote

Thanks so much. This is more description than I had hoped for. Could not have shown the taper better and very intriguing indeed. I’m hooked.
You're very welcome. Glad I could help.
Right on RISE.Tip does look different. I can’t wait to receive mine. I was hoping it was good on the heavier side.

poisonokie
Pro Angler
Pro Angler
Posts: 1948
Joined: Sat Aug 29, 2015 1:34 pm
Location: NW OKC OK USA

Re: High end Jdm cranking rod help

Post by poisonokie » Fri Mar 08, 2019 5:23 pm

That looks like a Daiwa regular taper. They're stiff in the tip and start to bend further down. That makes them feel more powerful and more tip heavy compared to faster sticks.
This is the way.

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Sat Mar 09, 2019 2:08 pm

poisonokie wrote:That looks like a Daiwa regular taper. They're stiff in the tip and start to bend further down. That makes them feel more powerful and more tip heavy compared to faster sticks.
Interesting observation. I can’t wait to get a look at the entire rod first hand.

domthewon
Platinum Angler
Platinum Angler
Posts: 805
Joined: Thu Aug 13, 2015 9:49 am

Re: High end Jdm cranking rod help

Post by domthewon » Fri Mar 15, 2019 6:38 pm

Uh oh.
09FDE2E1-EE5B-42FA-A1AB-AAF9016ECD9C.jpeg
09FDE2E1-EE5B-42FA-A1AB-AAF9016ECD9C.jpeg (63.61 KiB) Viewed 7370 times
F4846B20-B450-40AF-AD87-8F82BB94B313.jpeg
F4846B20-B450-40AF-AD87-8F82BB94B313.jpeg (47.98 KiB) Viewed 7370 times
09B8364F-8A9B-4F2B-91BA-EB99EE713029.jpeg
09B8364F-8A9B-4F2B-91BA-EB99EE713029.jpeg (54.62 KiB) Viewed 7370 times
A2CBDB7F-605B-4A10-A086-8E3F90A38B76.jpeg
A2CBDB7F-605B-4A10-A086-8E3F90A38B76.jpeg (60.36 KiB) Viewed 7370 times
0BD1063F-E778-4C64-9444-F5B8633A77C0.jpeg
0BD1063F-E778-4C64-9444-F5B8633A77C0.jpeg (23.25 KiB) Viewed 7370 times

Aquaftm45
Platinum Angler
Platinum Angler
Posts: 1081
Joined: Sun Dec 17, 2017 7:50 pm

Re: High end Jdm cranking rod help

Post by Aquaftm45 » Fri Mar 15, 2019 9:06 pm

domthewon wrote:Uh oh.
09FDE2E1-EE5B-42FA-A1AB-AAF9016ECD9C.jpeg
F4846B20-B450-40AF-AD87-8F82BB94B313.jpeg
09B8364F-8A9B-4F2B-91BA-EB99EE713029.jpeg
A2CBDB7F-605B-4A10-A086-8E3F90A38B76.jpeg
0BD1063F-E778-4C64-9444-F5B8633A77C0.jpeg

I love that Sendo dude who is putting these together. He looks stoned everytime he is on video or on on a podium in his BASS Nation Tourney's. Does that really say "Bad Mother F-er"?

Post Reply