Page 18 of 24
Re: TD-Z Owners Guild
Posted: Sat Oct 12, 2019 9:14 pm
by domthewon
Fishing4Fun wrote: ↑Sat Oct 12, 2019 8:20 pm
Looks outstanding Dom!
I appreciate it. I wasn't sure whether to post it here or on the post purple thread, but I love TD-Zs.
Re: TD-Z Owners Guild
Posted: Sun Oct 13, 2019 4:08 am
by MountainMan 83
domthewon wrote: ↑Sat Oct 12, 2019 6:43 pm
A little td-z love. ZPI star drag and bearings OG HH royal purple/black CCC and frame screws Level wind guide and brake screw, 6.3 gears , 90mm I’ZE handle with ITO kanji’s, and KTF NEO spool.
Wow! That looks great!
Re: TD-Z Owners Guild
Posted: Sun Oct 13, 2019 6:49 am
by domthewon
Re: TD-Z Owners Guild
Posted: Wed Oct 23, 2019 8:10 pm
by chrisg_sdcf
Re: TD-Z Owners Guild
Posted: Thu Oct 24, 2019 2:52 am
by MountainMan 83
chrisg_sdcf wrote: ↑Wed Oct 23, 2019 8:10 pm
Wow there are a lot of awesome looking reels in this thread. Some real works of art. I've got a couple. Ones kind of a blank canvas at the moment but I'm getting some ideas from this thread.
The other is a little scuffed up but I really like it. Spool didn't match as well as I hoped either but it's close enough. Just a little worried the threads on the end of the drive shaft might be worn down little since the original nut seemed to work it's way over them pretty easy but so far this handle/nut seem to be staying on.
The reels look good! One of these days I'm going to get myself an Ito. What spool are you running in it?
If that handle nut begins to be a problem, and you want to go another route other than replacing the driveshaft, let me know
Re: TD-Z Owners Guild
Posted: Thu Oct 24, 2019 5:55 am
by chrisg_sdcf
MountainMan 83 wrote: ↑Thu Oct 24, 2019 2:52 am
chrisg_sdcf wrote: ↑Wed Oct 23, 2019 8:10 pm
Wow there are a lot of awesome looking reels in this thread. Some real works of art. I've got a couple. Ones kind of a blank canvas at the moment but I'm getting some ideas from this thread.
The other is a little scuffed up but I really like it. Spool didn't match as well as I hoped either but it's close enough. Just a little worried the threads on the end of the drive shaft might be worn down little since the original nut seemed to work it's way over them pretty easy but so far this handle/nut seem to be staying on.
The reels look good! One of these days I'm going to get myself an Ito. What spool are you running in it?
If that handle nut begins to be a problem, and you want to go another route other than replacing the driveshaft, let me know
It's a fx68 1010 spool. I haven't used it yet, just put it in. Actually I think I need to buy a tool and adjust the spool shaft pin since its sticks out more in one side instead of being close to even but other than that it looks nice. I was using a steez limited 105sv spool that I liked a lot and if I don't like the 1010 it might go back in.
I'd definitely to take you up on that offer but I haven't ever taken a reel apart before so I'd have to figure out how to get the driveshaft out to send it to you.
Re: TD-Z Owners Guild
Posted: Thu Oct 24, 2019 6:46 am
by 389Maverick
Re: TD-Z Owners Guild
Posted: Thu Oct 24, 2019 11:24 am
by Good351
Nice find there 389Maverick!!! The MJR is a perfect match to the ITO!
Re: TD-Z Owners Guild
Posted: Fri Oct 25, 2019 4:15 am
by goldrod
Just found a pristine TDZ 100M in 5.7:1
So excited about this find. I’m not sure what to do with it.
Re: TD-Z Owners Guild
Posted: Fri Oct 25, 2019 4:34 am
by hoohoorjoo
goldrod wrote: ↑Fri Oct 25, 2019 4:15 am
Just found a pristine TDZ 100M in 5.7:1
So excited about this find. I’m not sure what to do with it.
Put some line in it, mount it on one of those many spare rods and go to work!
Re: TD-Z Owners Guild
Posted: Fri Oct 25, 2019 11:58 pm
by chrisg_sdcf
389Maverick wrote: ↑Thu Oct 24, 2019 6:46 am
Just gonna keep the Ito ball rolling with a recent find being the RC-002 MJR
I almost bought a purple rc-002 a while back but hesitated. The mjr looks great. How does the rc-002 perform?
Re: TD-Z Owners Guild
Posted: Sat Oct 26, 2019 6:22 am
by KP Duty
That old lime green zpi spool is the sheet. I'm surprised no one has tried to powder coat or anodized a spool around here. When those painted zpi spools came out, I remember someone asking how much weight the paint would add. Only on here, lol.
Re: TD-Z Owners Guild
Posted: Sat Oct 26, 2019 7:45 am
by poisonokie
KP Duty wrote: ↑Sat Oct 26, 2019 6:22 am
That old lime green zpi spool is the sheet. I'm surprised no one has tried to powder coat or anodized a spool around here. When those painted zpi spools came out, I remember someone asking how much weight the paint would add. Only on here, lol.
That was my first thought, I admit.
Re: TD-Z Owners Guild
Posted: Tue Dec 03, 2019 5:58 pm
by shlew
Re: TD-Z Owners Guild
Posted: Tue Dec 03, 2019 6:59 pm
by Gone Phishin
shlew wrote: ↑Tue Dec 03, 2019 5:58 pm
New Tat Elite matched my custom R+
R+Tat2.png
R+Tat1.png
Screen Shot 2019-12-04 at 10.07.51 AM.png
Wow!!! Love it! Bravo.