Latest Custom build is coming together...
- IlliniDawg01
- Pro Angler
- Posts: 2349
- Joined: Sun Mar 17, 2013 8:20 am
- Location: Glen Carbon, Illinois
Latest Custom build is coming together...
Building on a Phenix Redeye BR3-C-780H-B 40 Ton Travel Blank (7'8" 3/8 - 1 1/2 FA).
http://www.phenixrods.com/index.php?mai ... page&id=23
I like how all the custom stuff turned out. I just wish the epoxy would stay where I it was when I left it on the rod dryer. Still turned out pretty good except for some creep on the rear foam grip. I had a fancier reel nut, but it wasn't as comfortable as the basic one and didn't secure the reet foot nearly as well.
Rear Handle
Minima Reel Seat
Foregrip and Hook-keeper
I hope to put on the guides this weekend. Black Alconite SS K guides mid-micro sized (BKWAG-7J, BKWAG-6J, BKWAG-5.5J, BKBAG 5 x6, BMNAT-5-5.0 Tip Top) spiral wrapped of course.
DaveJ
http://www.phenixrods.com/index.php?mai ... page&id=23
I like how all the custom stuff turned out. I just wish the epoxy would stay where I it was when I left it on the rod dryer. Still turned out pretty good except for some creep on the rear foam grip. I had a fancier reel nut, but it wasn't as comfortable as the basic one and didn't secure the reet foot nearly as well.
Rear Handle
Minima Reel Seat
Foregrip and Hook-keeper
I hope to put on the guides this weekend. Black Alconite SS K guides mid-micro sized (BKWAG-7J, BKWAG-6J, BKWAG-5.5J, BKBAG 5 x6, BMNAT-5-5.0 Tip Top) spiral wrapped of course.
DaveJ
Re: Latest Custom build is coming together...
Looks good Dave.
- IlliniDawg01
- Pro Angler
- Posts: 2349
- Joined: Sun Mar 17, 2013 8:20 am
- Location: Glen Carbon, Illinois
Re: Latest Custom build is coming together...
Thanks. Normally I'm a function over form guy so I just kinda slop my rods together within reason. I'm actually trying to make this one look a little pretty.igl00jx wrote:Looks good Dave.
DaveJ
- Hogsticker2
- Pro Angler
- Posts: 7179
- Joined: Wed Feb 29, 2012 5:20 pm
Re: Latest Custom build is coming together...
Ever thought about dropping the 7,starting with the 6, and adding another 5?
- IlliniDawg01
- Pro Angler
- Posts: 2349
- Joined: Sun Mar 17, 2013 8:20 am
- Location: Glen Carbon, Illinois
Re: Latest Custom build is coming together...
I tried that, but when I do my spiral wrap I like to keep the striper guide as close to right on top of the blank as possible for aesthetic reasons (mostly OCD) and to help keep line from stacking on one side of the spool. If I used too small a guide (7 is already pretty small, the new Omens use 6s or 6.5s for runner guides for example) then the line can rub the side of the blank as it spirals under in certain conditions if I remember right. That was on a moderate blank, so a 6 would probably have worked fine on this longer, stiffer, faster blank.Hogsticker2 wrote:Ever thought about dropping the 7,starting with the 6, and adding another 5?
I haven't put them on yet, so I still might try it when I static test this weekend.
DaveJ
-
- Pro Angler
- Posts: 1925
- Joined: Tue Jul 03, 2012 10:51 pm
Re: Latest Custom build is coming together...
Nice work Dave!
Re: Latest Custom build is coming together...
Well done, Dave!
What reel are you going to pair it with and what apps are you going to use it for?
What reel are you going to pair it with and what apps are you going to use it for?
- IlliniDawg01
- Pro Angler
- Posts: 2349
- Joined: Sun Mar 17, 2013 8:20 am
- Location: Glen Carbon, Illinois
Re: Latest Custom build is coming together...
I'll put either my IS73 with an RCS1012 spool or my new MetDC on it most likely. It will be used for bigger jigs and texas rigs and perhaps frogs and large spinners on occasion.Ham Solo wrote:Well done, Dave!
What reel are you going to pair it with and what apps are you going to use it for?
DaveJ
-
- Platinum Angler
- Posts: 992
- Joined: Sun Mar 13, 2011 2:40 pm
- Location: Belleville, Illinois
Re: Latest Custom build is coming together...
Great work!
-
- TT Moderator
- Posts: 6805
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Latest Custom build is coming together...
That looks nice! I have a custom being built right now-Lamiglas PRO874 blank.....hoping it turns out half as nice as yours.
-
- Platinum Angler
- Posts: 1471
- Joined: Sat Aug 13, 2011 5:16 pm
- Location: Chicago
Re: Latest Custom build is coming together...
Did the blank come with the label on it? I've heard the recon2 comes that way.
- IlliniDawg01
- Pro Angler
- Posts: 2349
- Joined: Sun Mar 17, 2013 8:20 am
- Location: Glen Carbon, Illinois
Re: Latest Custom build is coming together...
smalliesteve wrote:Did the blank come with the label on it? I've heard the recon2 comes that way.
Yes and No. The labels were already attached, but to the last 8"of the blank... but they nicely included a second set of labels that were not attached.
DaveJ
-
- Platinum Angler
- Posts: 1471
- Joined: Sat Aug 13, 2011 5:16 pm
- Location: Chicago
Re: Latest Custom build is coming together...
thanks for the info Dave!
Re: Latest Custom build is coming together...
Very nice looking rod!
Re: Latest Custom build is coming together...
very well done!!!