Daiwa Cork Knobs, compatible with the Alphas Type F?

youareming · Post by **youareming** » Mon Jan 15, 2007 10:04 pm

Does anyone know if the Daiwa Cork Knobs are compatible with the Alphas Type F, if so, where do you find these Daiwa Cork Knobs?

Itchy · Post by **Itchy** » Tue Jan 16, 2007 1:34 am

yes they are...

find them here...

http://www.japantackle.com/Tuning_parts ... _Daiwa.htm

just4kix · Post by **just4kix** » Tue Jan 16, 2007 4:52 pm

You can also order a TD-Z Handle from Daiwa which supports 4 bearings and Cork Knobs.

youareming · Post by **youareming** » Tue Jan 16, 2007 5:43 pm

do i have to buy the cork handles with the 4 bearings, or just the ones without the bearings? (e.g. there are cork knobs on "japantackle" for $42 and $22, are they both compatible) Thank you

http://www.japantackle.com/Tuning_parts ... _Daiwa.htm

ChuckE · Post by **ChuckE** » Tue Jan 16, 2007 6:13 pm

The Alphas F you have already has the 2 bearings you'll need. Just get the cork knobs. You will find one bearing under each knob on the Alphas F.

Chuck

Daiwa Cork Knobs, compatible with the Alphas Type F?

Daiwa Cork Knobs, compatible with the Alphas Type F?

Re: Daiwa Cork Knobs, compatible with the Alphas Type F?

Re: Daiwa Cork Knobs, compatible with the Alphas Type F?

Re: Daiwa Cork Knobs, compatible with the Alphas Type F?

Re: Daiwa Cork Knobs, compatible with the Alphas Type F?