daiwa alphas gears
daiwa alphas gears
Will the alphas 7.2:1 gears fit in a pixy?
Has anyone gone this swap?
Lastly what all is needed for the swap other than the gears?
Has anyone gone this swap?
Lastly what all is needed for the swap other than the gears?
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: daiwa alphas gears
I am 99% sure they will be a direct swap into the pixy. The only variable thus far would be the drag stack. Once Daiwa releases these parts to purchase separately, that is one of my top projects to try.
Re: daiwa alphas gears
Let us know how ìt turns out
- Teal101
- TT Moderator
- Posts: 4884
- Joined: Thu Jul 14, 2011 5:59 am
- Location: Central Washington
- Contact:
Re: daiwa alphas gears
If I get some time I plan on doing this swap. I have an Alphas SV I can use the gears out of to test it. Just havent had the time to do it...on the list!
Re: daiwa alphas gears
Drag stack is different with the 7.2 gears vs the other two? InterestingPikeRoadBassn wrote:I am 99% sure they will be a direct swap into the pixy. The only variable thus far would be the drag stack. Once Daiwa releases these parts to purchase separately, that is one of my top projects to try.
Re: daiwa alphas gears
I swapped 7.2s into a px68 along with the yoke that the 7.2s have and it was a direct swap. The pixy runs the same yoke as the 5.8 alphas sv but the 7.2 yoke is a different design.
Re: daiwa alphas gears
What all did you have to swap?
Re: daiwa alphas gears
Just the gears and yoke. Drag stack and all other parts are good to go.mrpao wrote:What all did you have to swap?
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: daiwa alphas gears
Excellent!ss30378 wrote:Just the gears and yoke. Drag stack and all other parts are good to go.mrpao wrote:What all did you have to swap?
The only reason I questioned the drag stack was the height/thickness. Thank you for confirming the direct swap.
Re: daiwa alphas gears
Sweet! Gives me hope for a faster CV-Z/Monoblock. Are you listening Daiwa/MB?PikeRoadBassn wrote:Excellent!ss30378 wrote:Just the gears and yoke. Drag stack and all other parts are good to go.mrpao wrote:What all did you have to swap?
The only reason I questioned the drag stack was the height/thickness. Thank you for confirming the direct swap.
- blakjack23
- Elite Angler
- Posts: 660
- Joined: Sun Feb 27, 2011 10:32 am
- Location: Minneapolis, MN
Re: daiwa alphas gears
Are the 7.2 gears available for purchase now?
Re: daiwa alphas gears
Confirmed they are notblakjack23 wrote:Are the 7.2 gears available for purchase now?
- blakjack23
- Elite Angler
- Posts: 660
- Joined: Sun Feb 27, 2011 10:32 am
- Location: Minneapolis, MN
Re: daiwa alphas gears
That what I figured, but I was hoping there was some new news on them.igl00jx wrote:Confirmed they are notblakjack23 wrote:Are the 7.2 gears available for purchase now?
Re: daiwa alphas gears
J09-8301 Main
J09-8401 Pinion
I didn't get the yoke part number.
They were allowing back orders last time I talked to them.
J09-8401 Pinion
I didn't get the yoke part number.
They were allowing back orders last time I talked to them.
-
- Platinum Angler
- Posts: 1258
- Joined: Sat Mar 05, 2011 2:06 pm
Re: daiwa alphas gears
is this right hand, or left?ss30378 wrote:J09-8301 Main
J09-8401 Pinion
I didn't get the yoke part number.
They were allowing back orders last time I talked to them.
also, i probably order from daiwa at least once a week......and bug them each time about parts for the SV reels. the 7.2's will fit in the pixy, and use the same drag stack as the 6.8 and 5.7 sets. when i tried the 7.2 set in the pixy, i also used the new yoke that has the extra 'foot' on the back. i am uncertain as to whether or not it will be necessary to have this part installed with the gears. if not, that would certainly suggest that the 7.2 gears would also work in millionaires and monoblocks