Parts for td-z
Parts for td-z
I have a couple of td-z frames. I don’t have the internal parts. I was curious if parts for a steez or something else would work. I looked on plat and saw that a lot of the parts have been discontinued. I know it’s a long shot but I figured I’d ask. Thanks.
Re: Parts for td-z
Not easy.
Most difficult parts to find are sideplates and the drive shaft.
You can modify a drive shaft from an Alphas CT SV with a file and a lot of elbow grease.
Gears? you can do an easy swap with a OG Steez with a 6.3 ratio. https://tackletrap.com/index.php?main_p ... ts_id=3101
For a lefty td-z you can use a 7.1 Steez gear with no issue.
You can swap sideplates (and most parts) with a red og Fuego or with a BBS.
Just be carefull cause they use a 36mm spool like old Zillion and Td-z 100 Us trail.
Td-z 103 and 105 use a 34 mm spool like Steez and the new Zillion 1016, so you need a couple of spool spacers like these to fit a 34 spool in a 36 mm sideplate https://tackletrap.com/index.php?main_p ... s_id=15769
Most difficult parts to find are sideplates and the drive shaft.
You can modify a drive shaft from an Alphas CT SV with a file and a lot of elbow grease.
Gears? you can do an easy swap with a OG Steez with a 6.3 ratio. https://tackletrap.com/index.php?main_p ... ts_id=3101
For a lefty td-z you can use a 7.1 Steez gear with no issue.
You can swap sideplates (and most parts) with a red og Fuego or with a BBS.
Just be carefull cause they use a 36mm spool like old Zillion and Td-z 100 Us trail.
Td-z 103 and 105 use a 34 mm spool like Steez and the new Zillion 1016, so you need a couple of spool spacers like these to fit a 34 spool in a 36 mm sideplate https://tackletrap.com/index.php?main_p ... s_id=15769
A TD-Z is forever
Re: Parts for td-z
I have a Zillion 100H kicking around, no handle or spool, everything seems to work. Be willing to part with it.
-
- Senior Angler
- Posts: 172
- Joined: Sun Jun 03, 2007 6:23 pm
- Location: Okinawa, Japan
Re: Parts for td-z
LH or RH?
- slime king
- Senior Angler
- Posts: 149
- Joined: Wed Jan 30, 2008 3:48 pm
Re: Parts for td-z
TDX -Airmetal reels are basically TDZ's and are good options for getting gear sets and other parts.