New 2014 Shimano Reels

Have a question regarding an existing Shimano product? Talk directly to an official representative from Shimano!
User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 5289
Joined: Thu Jun 28, 2007 10:44 am

New 2014 Shimano Reels

Post by Bantam1 » Fri Jul 25, 2014 12:46 am

New 2014 Shimano Reels

Beastmaster 9000

Image

Introducing the Beastmaster 9000! This is the latest electronic powered reel from Shimano. With 55 pounds of drag and 250 pounds of cranking torque, this is the most powerful and durable electric reel we have offered.

Image

The new Giga Max brushless motor offers high speed and high torque (26% increase over previous models) with increased durability. Paired with a new bearing supported planetary gear set and new stainless steel sun gear, it offers 3 times the durability.

Featuring a new Thermo Adjust Drag that reduces heat by 50%! As with all electronics heat is the enemy. The Giga Max motor stops operating when the drag slips. This will help reduce heat and eliminate the motor from working when it doesn’t need to. The vented side plate also helps to dissipate heat that is generated from the motor. All of this has been done to boost the longevity of the electric motor. Even the power cable has 20% less resistance.

Image

Vented side plate

Image

The multi disc Cross Carbon drag stack and main gear.

Image

Calcutta Conquest

Image

Image

The new Calcutta Conquest brings a new level of smoothness to the round reel market. With the addition of Micro Module gearing, X-Ship and a new Low Friction Handle Rotation Design smooth has to be experienced to appreciate it. This is the smoothest reel I have ever felt.

We have also added the S3D spool and SVS Infinity to the S-Compact body design. This new body design reduces the B side (palm side) to a much smaller size. The 100 is now the size of a 50, and the 200 the size of a 100.
The new torque limiting levelwind uses a special clutch to prevent injury to the angler should their finger get trapped. In the past you would need to break the plastic idle gears should this situation occur. Now the clutch will slip and allow you to escape uninjured. I know this is not a common occurrence, but it does happen more than most people realize.

Image

Aero Technium

The premier surf spinning reel from Shimano!

Image

Packed with features the new Aero Technium will provide surf anglers with performance that matches their demands.
Aero Wrap II with Super Slow 10 Oscillation provides a flat line lay on the spool. This is paired with a large diameter long stroke spool. The large diameter shallow spools allow the angler to caster further due to more line leaving the spool per rotation. The Propulsion spool design further reduces spool lip friction. Long Stroke spools improve efficiency and casting distance by reducing line direction changes. The Super Slow 10 Oscillation makes approximately 100 wraps in one stroke of the oscillation. The line is managed by our One Piece bail wire.
Combine this with a new Cold Forged drive gear and X-Ship housed in a new Power Aluminum (Power AL) frame for the best combination of power and durability.
The new Instant Drag feature makes use of a few turns to go from free spool to the “Fight” setting. Of course the drag system is also waterproof. What good is a surf reel is the drag isn’t waterproof?

Ultegra CI4+ XSB

CI4+ material offers a large weight savings over other materials. We chose this material to pair up with the compact body of the Ultegra. This reduced weight improves rod speeds and assists with making longer casts.
The new 2 Speed Super Slow 5 Oscillation provides a flatter line lay on the Propulsion Spool (AR-C spool). While not quite as slow as the Aero Technium, it is drastically slower than most spinning reels at 50 wraps per oscillation stroke. It features the same style large diameter shallow spool as the Aero Technium.

Cold Forged Gearing
X-Ship
Aero Wrap II- Super Slow 5 Oscillation
Instant Drag
Waterproof Drag
Image

Ultegra


The Aluminum bodied version of the Ultegra Ci4+ XSB. It features X-Ship, Aero Wrap II- Super Slow 5 Oscillation and Instant Drag.

Image

User avatar
spookybaits
Pro Angler
Pro Angler
Posts: 2137
Joined: Thu Nov 10, 2011 3:17 pm
Location: In the belly of a shark

Re: New 2014 Shimano Reels

Post by spookybaits » Wed Jul 30, 2014 11:30 am

Now that shimano jdm reels are coming to US market- any word on the upcoming Brenious?

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 5289
Joined: Thu Jun 28, 2007 10:44 am

Re: New 2014 Shimano Reels

Post by Bantam1 » Thu Jul 31, 2014 12:09 am

We are not bringing every product over. Shimano is a global company but not all products will fit our market needs. I know what is here being tested and that is not on the list.

mitchct
Elite Angler
Elite Angler
Posts: 308
Joined: Tue Dec 13, 2011 2:51 pm
Location: Northern Illinois/Southern Wisconsin

Re: New 2014 Shimano Reels

Post by mitchct » Thu Jul 31, 2014 1:51 am

How about parts for the reels you do market? Can we get them through the US parts store at some point?

I'm really liking this global outlook by the way..........

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 5289
Joined: Thu Jun 28, 2007 10:44 am

Re: New 2014 Shimano Reels

Post by Bantam1 » Thu Jul 31, 2014 2:21 am

For now we will continue to stock parts for the reels we have in our market. I'm not sure what the future plans are. We can get parts from Japan. It just takes a while sometimes.

karirick
Platinum Angler
Platinum Angler
Posts: 1000
Joined: Sat Sep 16, 2006 10:33 am

Re: New 2014 Shimano Reels

Post by karirick » Thu Jul 31, 2014 8:18 am

Bantam1 wrote:For now we will continue to stock parts for the reels we have in our market. I'm not sure what the future plans are. We can get parts from Japan. It just takes a while sometimes.
So Conquest, Stella, Metanium and Antares we can get parts for here Bantam? The "market" is reels sold through US retailers? Thanks.

Rick

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 5289
Joined: Thu Jun 28, 2007 10:44 am

Re: New 2014 Shimano Reels

Post by Bantam1 » Thu Jul 31, 2014 11:58 pm

Yes and yes. We are still waiting on parts for the Conquest. We have a small number of parts for the other models.

jlb
Elite Angler
Elite Angler
Posts: 560
Joined: Sun Aug 28, 2011 11:10 am

Re: New 2014 Shimano Reels

Post by jlb » Fri Aug 01, 2014 2:23 pm

Any word on the exsence dc coming over?

User avatar
Martin Lo
Elite Angler
Elite Angler
Posts: 572
Joined: Mon Jun 30, 2014 9:26 pm

Re: New 2014 Shimano Reels

Post by Martin Lo » Fri Aug 01, 2014 4:22 pm

Bantam, my daughter had her finger stuck in an alphas levelwind once. She was only two at the time.

Never did I figure out how to disassemble a reel as quickly...my Macgwyer moment :D

karirick
Platinum Angler
Platinum Angler
Posts: 1000
Joined: Sat Sep 16, 2006 10:33 am

Re: New 2014 Shimano Reels

Post by karirick » Fri Aug 01, 2014 9:51 pm

Bantam1 wrote:Yes and yes. We are still waiting on parts for the Conquest. We have a small number of parts for the other models.
Thanks. I'm still wanting to try a 2500S Stella FI spool on a 2500FE, and also want a Conquest 201 handle for my 101.

Rick

Gloomis34
Senior Angler
Senior Angler
Posts: 187
Joined: Tue Dec 06, 2011 5:36 pm

Re: New 2014 Shimano Reels

Post by Gloomis34 » Sun Aug 03, 2014 7:10 am

I am very happy about jdm reels being offered to the U.S. But I'm curious why did
You guys deside on the c2000sfi instead of the c2000HGS?

User avatar
Bantam1
Manufacturer Support
Manufacturer Support
Posts: 5289
Joined: Thu Jun 28, 2007 10:44 am

Re: New 2014 Shimano Reels

Post by Bantam1 » Mon Aug 04, 2014 12:05 am

To be honest I am not sure what the exact reason was. I think they looked at the IPT specs and decided the standard version fit the needs for most of the US and Canadian anglers.

Gloomis34
Senior Angler
Senior Angler
Posts: 187
Joined: Tue Dec 06, 2011 5:36 pm

Re: New 2014 Shimano Reels

Post by Gloomis34 » Mon Aug 04, 2014 3:38 am

Alright is there a chance the c2000hgs might come over to our market? I have this size
And I love it it fits a lot of my bass and UL needs.

Gloomis34
Senior Angler
Senior Angler
Posts: 187
Joined: Tue Dec 06, 2011 5:36 pm

Re: New 2014 Shimano Reels

Post by Gloomis34 » Mon Aug 04, 2014 3:43 am

karirick wrote:
Bantam1 wrote:Yes and yes. We are still waiting on parts for the Conquest. We have a small number of parts for the other models.
Thanks. I'm still wanting to try a 2500S Stella FI spool on a 2500FE, and also want a Conquest 201 handle for my 101.

Rick
it may work if you get the spool and the drag knob

Oolie
Elite Angler
Elite Angler
Posts: 567
Joined: Sun Feb 04, 2007 3:58 pm

Re: New 2014 Shimano Reels

Post by Oolie » Sun Feb 22, 2015 12:51 pm

The levelwind disengagement is interesting, will it allow the levelwind to return to center or move freely should you hook a large fish that pulls a lot of line?

Post Reply