Guys,
What's the easiest way to get a Core50 MG7 side plate screw?
I caught a fish today and realized it was gone. Hopefully it's not too much of a pain? I don't mind driving to the Shimano Irvine location for a screw.
Thanks!
Core 50 Sideplate Screw
-
- Elite Angler
- Posts: 270
- Joined: Thu Aug 16, 2007 9:48 pm
- Location: Los Angeles, CA
Re: Core 50 Sideplate Screw
Have you determined which screw you are missing? We might be able to match something up if they are no longer in stock. We do not sell part over the counter, but you can order online through our website or by calling 877-577-0600.
-
- Elite Angler
- Posts: 270
- Joined: Thu Aug 16, 2007 9:48 pm
- Location: Los Angeles, CA
Re: Core 50 Sideplate Screw
Bantam,
From the schematics (thank goodness I keep all of them), it's labeled part 4044.
It's on the handle side, which has 2 screws, both 4044.
I found a site that has aftermarket screws, which says replace part number BNT 4044.
But I'd rather get it from ya'll.
From the schematics (thank goodness I keep all of them), it's labeled part 4044.
It's on the handle side, which has 2 screws, both 4044.
I found a site that has aftermarket screws, which says replace part number BNT 4044.
But I'd rather get it from ya'll.
Re: Core 50 Sideplate Screw
There was a change to the part number a while back. The new global part number is 10LZD. We are currently backordered until 8/25, but I think we can match it up if you stop by.
-
- Senior Angler
- Posts: 181
- Joined: Sun Sep 04, 2022 1:47 am
Re: Core 50 Sideplate Screw
i may or may not have one i gotta checkDarkShadow wrote: ↑Mon Mar 25, 2024 3:50 pmBantam,
From the schematics (thank goodness I keep all of them), it's labeled part 4044.
It's on the handle side, which has 2 screws, both 4044.
I found a site that has aftermarket screws, which says replace part number BNT 4044.
But I'd rather get it from ya'll.
-
- Elite Angler
- Posts: 270
- Joined: Thu Aug 16, 2007 9:48 pm
- Location: Los Angeles, CA
Re: Core 50 Sideplate Screw
Thanks! Now that I notice it's missing, I can't stop thinking about it.HellaBread wrote: ↑Sat Mar 30, 2024 3:50 pmi may or may not have one i gotta checkDarkShadow wrote: ↑Mon Mar 25, 2024 3:50 pmBantam,
From the schematics (thank goodness I keep all of them), it's labeled part 4044.
It's on the handle side, which has 2 screws, both 4044.
I found a site that has aftermarket screws, which says replace part number BNT 4044.
But I'd rather get it from ya'll.
-
- Senior Angler
- Posts: 181
- Joined: Sun Sep 04, 2022 1:47 am
Re: Core 50 Sideplate Screw
i’ll pm you
-
- Senior Angler
- Posts: 181
- Joined: Sun Sep 04, 2022 1:47 am
Re: Core 50 Sideplate Screw
it just hit me that 10LZD is listed as the updated replacement for TGT2882 which is in stock on the site so I assume that should work but bantam1 should confirm
Re: Core 50 Sideplate Screw
BNT4044 does show TGT2882 as a sub. We have 71 in stock currently.