Nrx/conquest finesse rod

A specialized forum to discuss anything and everything about your favorite or not so favorite fishing rods.
Johnny marks
Angler
Angler
Posts: 20
Joined: Tue Aug 14, 2018 10:33 pm

Nrx/conquest finesse rod

Post by Johnny marks » Sat Aug 17, 2019 11:16 pm

I'm looking for a finesse rod in both rod lines to throw drop shots shakey heads ned rigs neko rigs mainly drop shots which rod can cover these the best in the nrx line and conquest line

User avatar
BRONZEBACK32
Pro Angler
Pro Angler
Posts: 2234
Joined: Sun Dec 18, 2011 8:44 pm
Location: Utah

Re: Nrx/conquest finesse rod

Post by BRONZEBACK32 » Sun Aug 18, 2019 12:39 am

842 Conquest and 852 NRX would be my choice for versatility.

I use my 842 Conquest mostly for small jerkbaits, I use a Orochi XX whipsnake for drop shot and a Destroyer Flyssa for Ned rigs.

852c NRX I use for tube jigs and keitch fat impact.
Last edited by BRONZEBACK32 on Mon Aug 19, 2019 1:22 am, edited 1 time in total.

Cranky
Elite Angler
Elite Angler
Posts: 452
Joined: Tue Jan 03, 2017 4:22 am

Re: Nrx/conquest finesse rod

Post by Cranky » Sun Aug 18, 2019 5:39 am

Casting or spinning rods?

Bubbleboy
Elite Angler
Elite Angler
Posts: 284
Joined: Wed Dec 31, 2014 1:34 am
Location: Toronto

Re: Nrx/conquest finesse rod

Post by Bubbleboy » Sun Aug 18, 2019 9:11 am

I have both the Conquest 842s and 842c. LOVE both of these. Use the spinning for weightless senkos, Ned rigs and will, but don’t like it, drop shot. The casting is used for jerkbaits, tubes, light Texas rigs and small crank baits.

The 842s has slightly more power than an NRX 822 syr. Given the NRX 822 dsr is even softer, you might think the Conquest is too stout...although I make it work. You could look at the Conquest 782 as both spinning an casting are very whippy, and may be more suited towards drop shot, if you think the 6’ 6” is long enough.
Toronto, Ont.

Cranky
Elite Angler
Elite Angler
Posts: 452
Joined: Tue Jan 03, 2017 4:22 am

Re: Nrx/conquest finesse rod

Post by Cranky » Sun Aug 18, 2019 9:42 am

How does the Conquest 842S compare to the NRX852S?

Bubbleboy
Elite Angler
Elite Angler
Posts: 284
Joined: Wed Dec 31, 2014 1:34 am
Location: Toronto

Re: Nrx/conquest finesse rod

Post by Bubbleboy » Sun Aug 18, 2019 10:10 am

Cranky wrote:
Sun Aug 18, 2019 9:42 am
How does the Conquest 842S compare to the NRX852S?
Slower. I don’t like the 852s or c. They’re XF action makes the rest of the rod a broom handle, imo
Toronto, Ont.

Cranky
Elite Angler
Elite Angler
Posts: 452
Joined: Tue Jan 03, 2017 4:22 am

Re: Nrx/conquest finesse rod

Post by Cranky » Sun Aug 18, 2019 2:36 pm

That’s too bad, I was hoping it was stouter and faster! Just goes to show rods are a personal preference a lot of the time. 852S is about as soft as I like to go.

User avatar
BRONZEBACK32
Pro Angler
Pro Angler
Posts: 2234
Joined: Sun Dec 18, 2011 8:44 pm
Location: Utah

Re: Nrx/conquest finesse rod

Post by BRONZEBACK32 » Mon Aug 19, 2019 1:20 am

I love my NRX 852c, I don't think its to stiff at all, its one hell of a tube jig rod for smallies.

I wish there was a Conquest 841s, that would be amazing....

goldrod
Pro Angler
Pro Angler
Posts: 6250
Joined: Sat Jun 02, 2007 4:30 pm

Re: Nrx/conquest finesse rod

Post by goldrod » Mon Aug 19, 2019 7:09 am

Does the 803c fall into the category of finesse rod ?
For by him were all things created, that are in heaven, and that are in earth, visible and invisible

hoohoorjoo
TT Moderator
TT Moderator
Posts: 6801
Joined: Mon Feb 28, 2011 1:56 pm
Location: Oxford GA

Re: Nrx/conquest finesse rod

Post by hoohoorjoo » Mon Aug 19, 2019 9:26 am

goldrod wrote:
Mon Aug 19, 2019 7:09 am
Does the 803c fall into the category of finesse rod ?
The 802 could be termed a finesse stick, but the 803 has a good strong backbone. It may be ok for "power finesse", i.e. 1/4 oz and up.
Try not to let your mind wander. It is much too small to be outside unsupervised.

goldrod
Pro Angler
Pro Angler
Posts: 6250
Joined: Sat Jun 02, 2007 4:30 pm

Re: Nrx/conquest finesse rod

Post by goldrod » Mon Aug 19, 2019 3:46 pm

hoohoorjoo wrote:
Mon Aug 19, 2019 9:26 am
goldrod wrote:
Mon Aug 19, 2019 7:09 am
Does the 803c fall into the category of finesse rod ?
The 802 could be termed a finesse stick, but the 803 has a good strong backbone. It may be ok for "power finesse", i.e. 1/4 oz and up.
Thanks, I like the rod esp with the ss sv reel, I have a GLX but I'm sure more expensive rods bring more to the table
For by him were all things created, that are in heaven, and that are in earth, visible and invisible

User avatar
TravisNY
Elite Angler
Elite Angler
Posts: 322
Joined: Sat Nov 11, 2006 1:07 pm

Re: Nrx/conquest finesse rod

Post by TravisNY » Wed Aug 21, 2019 4:03 pm

Bubbleboy wrote:
Sun Aug 18, 2019 10:10 am
Cranky wrote:
Sun Aug 18, 2019 9:42 am
How does the Conquest 842S compare to the NRX852S?
Slower. I don’t like the 852s or c. They’re XF action makes the rest of the rod a broom handle, imo
Same here sir. Never cared whatsoever for the 852s (all I fish are smallies). 872s different story in my hands dragging smaller tubes. Anyone here actually fished a 782s Conquest ? Curious of your take if so. Thanks. Sorry to derail gents.
Team flannel, overtime and promotion.

karirick
Platinum Angler
Platinum Angler
Posts: 1000
Joined: Sat Sep 16, 2006 10:33 am

Re: Nrx/conquest finesse rod

Post by karirick » Sun Feb 14, 2021 5:57 am

Bubbleboy wrote:
Sun Aug 18, 2019 9:11 am
I have both the Conquest 842s and 842c. LOVE both of these. Use the spinning for weightless senkos, Ned rigs and will, but don’t like it, drop shot. The casting is used for jerkbaits, tubes, light Texas rigs and small crank baits.

The 842s has slightly more power than an NRX 822 syr. Given the NRX 822 dsr is even softer, you might think the Conquest is too stout...although I make it work. You could look at the Conquest 782 as both spinning an casting are very whippy, and may be more suited towards drop shot, if you think the 6’ 6” is long enough.
Bumping this. So you are saying the 822 DSR is softer than the 822 SYR in NRX?

I got my first NRX's Friday and am blown away!! The 822 DSR weighs 3.35oz; I truly cannot believe that.

I also got the 802S which weighs 3.6 oz and is a little stiffer than I had hoped for.

Thinking the 822 SYR would be softer than the 822 DSR as it is rated for less.

Please confirm anyone that has handled both which is the softer/lighter action rod.

Thanks.

freelancer27
Platinum Angler
Platinum Angler
Posts: 1058
Joined: Sun Nov 13, 2016 8:08 am

Re: Nrx/conquest finesse rod

Post by freelancer27 » Sun Feb 14, 2021 4:11 pm

I can highly recommend the NRX 852c as well. I have mine paired with a Steez CT SV and it this combo can throw down to 1/16oz! You will not cast far or very accurate with this combo with a 1/16oz lure, but if you get into the 1/8oz range, this combo will shine!!!

eagleriver1_fish
Senior Angler
Senior Angler
Posts: 69
Joined: Sat Apr 18, 2020 6:01 pm

Re: Nrx/conquest finesse rod

Post by eagleriver1_fish » Sun Feb 14, 2021 7:27 pm

NRX spinning I prefer the 872s, but the 852 is a great rod too. Casting the 852c is a great rod. I don't have a Conquest that is for finesse.

Regarding the DSR vs SYR. I have a DSR and I have fished the SYR a little (I don't own one) and I believe the DSR has a softer tip if I remember the SYR correctly. I love the DSR for drop shot but I wouldn't use it for too many applications (maybe light wacky in open water). I think the lure rating is a bit misleading because the DSR is a drop shot rod, I think they adjust the rating accordingly, but someone with more experience would have better insight on the differences.

Post Reply