Finished installing the adapter on my SS SV. Here's a tutorial on it if your interested.
First I test fit the adapter.
Then I prepped the surface with emery cloth to ensure it stuck good.
Clean up area with q-tip and alcohol.
Apply epoxy.
Clean up excess with alcohol.
Daiwa SS SV 103* Spool tention click adapter
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
-
- Senior Angler
- Posts: 179
- Joined: Wed May 25, 2016 7:04 am
Re: Daiwa SS SV 103* Spool tention click adapter
Let cure. I add weight to hold it in place.
Reassemble the reel(trying to speed it up....), Now add the leaf spring.
I use a fiber washer on these. I had one spring come out of the holder/adapter and it was near impossible to remove the cap. You could also use the stock o'ring as a keeper.
Install the cap.
And your done.
Reassemble the reel(trying to speed it up....), Now add the leaf spring.
I use a fiber washer on these. I had one spring come out of the holder/adapter and it was near impossible to remove the cap. You could also use the stock o'ring as a keeper.
Install the cap.
And your done.