Re: Steez A Gears
Posted: Wed Jul 31, 2019 2:04 am
Lefty
After some measuring/comparing. Moding the yoke was a no go.......... But, There should be enough of the OG ZLN/Steez pinions to mod them. I have a 6.3:1 lefty ordered and access to a lathe. I'll post once I get a chance to tinker. I also have a 4.9:1 and 5.3:1 set ordered as well.jjbassnforfun wrote: ↑Mon Jul 29, 2019 5:51 pmWhy not use the stacked drag from the OG?BARRAMANIAC wrote: ↑Mon Jul 29, 2019 5:02 pmpretty sure the slot in the pinion where the yoke goes is at different heights for the steez a vs og zillion pinion. but in the og zillion range there is a main gear to match 3 out of the 4 ratios available in the steez A , 5.3:1 from the j dream , 6.3:1 and 7.1:1 I have done the mod with a 6.3:1 og zillion main gear and steez A pinion and it is nice and smooth, I removed the o rings from the main shaft and use 2 carbontex washers , one under and one in the main gear and use the steez A drag plate minus the clicker pawl and spring.jjbassnforfun wrote: ↑Sun Jul 28, 2019 5:22 amSomething we'll need to work on. I'm pulling the sleeves out of my A and see what mods the yoke may need to get the OG gears fitted. I got a tatula yoke in the bin somewhere...............BARRAMANIAC wrote: ↑Sat Jul 27, 2019 2:34 pm
I am successfully running a og zillion main gear in a steez a but have to use the steez a pinion.
I want mine to be 5.3:1 and have a set of gears order. I don't have the OEM pinion and they aren't selling them yet(for repair only). I'm thinking a Tat yoke has the similar slot location and might be mod-able to get the OG gear set installed? Its my next project after the Coastal-TW 200 drag mod...........
The Tackle Trap can help with all things Daiwa.Salty Parrot wrote: ↑Sun Nov 24, 2019 10:29 amAnywhere I can get a set of new steez A gears without having to order from daiwa?