Shimano Stradic 19
Posted: Mon May 20, 2019 10:51 pm
Don't we all... The rear butt garnish is very Saragosa style.
I just want to see the schematic. See if its got a double shaft slide for the oscillating mechanism.
TackleTour
Shimano Stradic 19
Page 1 of 3
Re: Shimano Stradic 19
Posted: Mon May 20, 2019 11:55 pm
Re: Shimano Stradic 19
Posted: Tue May 21, 2019 2:25 am
More dets on the Japan website
http://fishing.shimano.co.jp/product/reel/5768
http://fishing.shimano.co.jp/product/reel/5768
Re: Shimano Stradic 19
Posted: Tue May 21, 2019 2:33 am
Double shaft support... Perfect.
Re: Shimano Stradic 19
Posted: Tue May 21, 2019 2:39 am
Could just be a generic SD promo pic, as is the G free body pic.
Re: Shimano Stradic 19
Posted: Tue May 21, 2019 2:54 am
I think your right...
The second dark pic actually has the lines and the void under the rotor of the FJ Stella... You can see the fluid body line too...
Here's hoping that it does have double shaft support system.
The second dark pic actually has the lines and the void under the rotor of the FJ Stella... You can see the fluid body line too...
Here's hoping that it does have double shaft support system.
Re: Shimano Stradic 19
Posted: Wed May 22, 2019 8:27 pm
Maybe the new CI4+ will be white 
Re: Shimano Stradic 19
Posted: Wed May 22, 2019 8:41 pm
Shimano's colour scheme's are a bit out of touch within regards to lineage...
Nothing worse than getting the same name but totally different colours - quality over looks for me but keep some homage to the series imho.
Even the Ci4 F to Ci4+ FA was concurrent in paint colour (close enough) then Ci4+ FB flew that little puppy paint scheme right off the rails...
Nothing worse than getting the same name but totally different colours - quality over looks for me but keep some homage to the series imho.
Even the Ci4 F to Ci4+ FA was concurrent in paint colour (close enough) then Ci4+ FB flew that little puppy paint scheme right off the rails...
Re: Shimano Stradic 19
Posted: Thu May 23, 2019 6:12 am
Schematics are up on the AU website for the FL.
Confirmed that only one oscillating guide shaft...
They've done away with the non replaceable line roller bearing - to an improved old style line roller setup "bravo"...
And a bushing supported shaft it seems - people just going to bearing that undoubtedly.
Left hand drive bearing retained now by the way of 3 screws
And the pinion main upper bearing screw & plate retained...
For seeing an "above Stradic" reel cull from the line up - will it be the Sustain or other?
Confirmed that only one oscillating guide shaft...
- IMG_20190523_230541.jpg (108.05 KiB) Viewed 11515 times
- IMG_20190523_230427.jpg (90.52 KiB) Viewed 11515 times
- IMG_20190523_230342.jpg (94.41 KiB) Viewed 11515 times
- IMG_20190524_071527.jpg (101.12 KiB) Viewed 11462 times
- IMG_20190524_070921.jpg (62 KiB) Viewed 11462 times
Re: Shimano Stradic 19
Posted: Thu May 23, 2019 2:33 pm
And they snuck this 'full size' bushing in to replace the weird little non replaceable bushing in the FK - looks bearing replaceable in the FL... Time will tell.
- IMG_20190524_072812.jpg (78.57 KiB) Viewed 11459 times
Re: Shimano Stradic 19
Posted: Thu May 23, 2019 5:04 pm
Re: Shimano Stradic 19
Posted: Wed May 29, 2019 3:11 pm
Can you post a link to the schematics on Shimano Australia site. I'm not seeing it under the saltwater reel or fishing reel and the main page with the Stradic FL doesn't seem to have any link to any schematics. Thank you.
Re: Shimano Stradic 19
Posted: Wed May 29, 2019 3:42 pm
You have to do the search as such.
No way to really link as it comes up as PDF download links.
No way to really link as it comes up as PDF download links.
Re: Shimano Stradic 19
Posted: Thu May 30, 2019 1:51 pm
Is that "shimanopromotions.com.au"? So you have to register the product before they send you a link to download the schematics?
Re: Shimano Stradic 19
Posted: Thu May 30, 2019 1:54 pm