Why doesn't Daiwa & Shimano Cerakote their reels?
Why doesn't Daiwa & Shimano Cerakote their reels?
Got a friend who just "Cerakoted" his first reel in a chameleon color. Not only does it looks amazing, but the paint holds extremely well, and noticeably better than your standard Daiwa paint. Wouldn't that be a huge plus for us all not having to worry that much about scratches and chipping? I may be mistaken, but i don't believe automotive paint cost any more than Cerakote, so what gives?
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Cost. Frames would have to be completely disassembled and sandblasted for the coating to adhere. Plus, Elite and H both require oven cures. Coating C can be air cured. Could possibly assemble carefully after 24 hours, but it actually takes 5 days to fully cure. Just not feasible for mass production.
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Interesting, i always thought there was some kind of an oven cure for the paint we have on our reels. But as you have mentioned, they could use the C coating that is air cured. But then again, i'm not exactly sure what the prep work goes into your standard shimano/daiwa paint, so the sandblasting may be too much works.tywithay wrote: ↑Wed Jun 17, 2020 11:39 pmCost. Frames would have to be completely disassembled and sandblasted for the coating to adhere. Plus, Elite and H both require oven cures. Coating C can be air cured. Could possibly assemble carefully after 24 hours, but it actually takes 5 days to fully cure. Just not feasible for mass production.
Or maybe do it for limited edition reels
-
- Pro Angler
- Posts: 1513
- Joined: Fri May 08, 2015 11:43 pm
- Location: Gold Coast, Queensland. Australia
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Whatever the Curado D was painted with - it's pretty damn resistant to paint stripper.
And planned obsolescence...
And planned obsolescence...
- doomtrprz71
- Elite Angler
- Posts: 406
- Joined: Tue Jan 14, 2014 4:35 am
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
I'd say cost and itar, they have trouble doing the coating overseas. Cerakote can be cured in a hour with an oven, duracoat requires longer to cure. Plastic takes longer to cure with cerakote but it's still a couple of hours.
-
- Senior Angler
- Posts: 169
- Joined: Tue May 28, 2019 1:49 pm
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
As a Certified Cerakote Applicator who does this full time I’m going to say it’s cost. Cerakote process requires a certain process to be done correctly. Also please note when doing chameleon it’s a 3 stage process. Cerakote base layer, chameleon layer, cerakote gloss clear layer. That being said, if done right cerakote is an amazing finish and ultra thin (.001”).
-
- Senior Angler
- Posts: 169
- Joined: Tue May 28, 2019 1:49 pm
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Check out the Cerakote process
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
With how generic paint jobs are on the current shimano/daiwa, there won't be needed 3 different coats to match the generic gray, silver or black. They could always use the air cured cerakote if baking takes too much time or is too expensive on their end. The chameleon cerakote that was done for a bud of mine was noticeably less expensive than a few sites i've asked to paint a reel in an automotive paint back in 2018. I'll most likely cerakote a tdz or an alphas this season. Really curious on how the paint holds compared to the daiwas/shimanos.
-
- Senior Angler
- Posts: 169
- Joined: Tue May 28, 2019 1:49 pm
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Air cured cerakote is not as durable as the oven cured Cerakote. Also Air Cured Cerakote (C-Series) takes 5 days to fully cure. Oven Cured Cerakote 1 hour for materials that can handle 300f, 2 hours @ 250, 2-3 hours @ 150f for polymers and other delicate materials.SSS wrote: ↑Fri Jun 19, 2020 9:35 amWith how generic paint jobs are on the current shimano/daiwa, there won't be needed 3 different coats to match the generic gray, silver or black. They could always use the air cured cerakote if baking takes too much time or is too expensive on their end. The chameleon cerakote that was done for a bud of mine was noticeably less expensive than a few sites i've asked to paint a reel in an automotive paint back in 2018. I'll most likely cerakote a tdz or an alphas this season. Really curious on how the paint holds compared to the daiwas/shimanos.
For older Magnesium Frames like the TDZ I can guarantee it will have pitting under the factory coating. Cerakote is ultra thin and will not fill in/ hide the the pitting. Their are ways to fill in pitting prior to cerakote but for some reels still best to go automotive paint with high build sandable primer/base/clear.
Also Cerakote oven cure (H-series) is not UV stable. Its fine under most uses out doors but it cannot be left in the sun for long periods of time. Air Cure Cerakote is UV stable.
-
- Senior Angler
- Posts: 169
- Joined: Tue May 28, 2019 1:49 pm
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Example of a excellent condition older magnesium reel with no signs of pitting with factory coating on. Once coating sandblasted off it reveals a ton of pitting in the metal. I used some filler to fill in the pit areas where visible. Took a ton of time to do and would of been much easier with auto primer/paint.
-
- Senior Angler
- Posts: 169
- Joined: Tue May 28, 2019 1:49 pm
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Did you see anywhere near as much pitting on aluminium frames, say an alphas type f or the 103?SAGISI CUST0MS wrote: ↑Fri Jun 19, 2020 10:42 amExample of a excellent condition older magnesium reel with no signs of pitting with factory coating on. Once coating sandblasted off it reveals a ton of pitting in the metal. I used some filler to fill in the pit areas where visible. Took a ton of time to do and would of been much easier with auto primer/paint.
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Yea, i'm aware the C series is the weakest when it comes to scratches and most likely chipping, but would you say its better or worse than automotive paint diawa/shimano uses? The chameleon paint done to a bud of mine was with the H series, which from my understanding is almost as good as the E series, but has much more color choices.SAGISI CUST0MS wrote: ↑Fri Jun 19, 2020 10:33 amAir cured cerakote is not as durable as the oven cured Cerakote. Also Air Cured Cerakote (C-Series) takes 5 days to fully cure. Oven Cured Cerakote 1 hour for materials that can handle 300f, 2 hours @ 250, 2-3 hours @ 150f for polymers and other delicate materials.SSS wrote: ↑Fri Jun 19, 2020 9:35 amWith how generic paint jobs are on the current shimano/daiwa, there won't be needed 3 different coats to match the generic gray, silver or black. They could always use the air cured cerakote if baking takes too much time or is too expensive on their end. The chameleon cerakote that was done for a bud of mine was noticeably less expensive than a few sites i've asked to paint a reel in an automotive paint back in 2018. I'll most likely cerakote a tdz or an alphas this season. Really curious on how the paint holds compared to the daiwas/shimanos.
For older Magnesium Frames like the TDZ I can guarantee it will have pitting under the factory coating. Cerakote is ultra thin and will not fill in/ hide the the pitting. Their are ways to fill in pitting prior to cerakote but for some reels still best to go automotive paint with high build sandable primer/base/clear.
Also Cerakote oven cure (H-series) is not UV stable. Its fine under most uses out doors but it cannot be left in the sun for long periods of time. Air Cure Cerakote is UV stable.
-
- Senior Angler
- Posts: 191
- Joined: Mon Jun 25, 2018 8:01 am
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
I’ve had AR’s cerakote professionally and never thought about my reels! That’s a great option IMO, and I would think a good bit more durable than most reel paint. What kind of money is cerakoting reels going for these days? Like basic 1-2 colors?
-
- Senior Angler
- Posts: 191
- Joined: Mon Jun 25, 2018 8:01 am
Re: Why doesn't Daiwa & Shimano Cerakote their reels?
Half a notion that if the new Stradic FL is a departure from current Shimano ways of decreasing durability (fingers crossed!), kinda want to cerakote a couple white, an ode to making Stradic’s great again!