Most manageable fluorocarbon?
Most manageable fluorocarbon?
Hey guys and girls,
Today I am looking for the most manageable fluorocarbon, I will be using this with a Daiwa T3 in 10lb... Also i prefer prescision wound because its a nightmare to spool unprecisely wound line.
Today I am looking for the most manageable fluorocarbon, I will be using this with a Daiwa T3 in 10lb... Also i prefer prescision wound because its a nightmare to spool unprecisely wound line.
- Hogsticker2
- Pro Angler
- Posts: 7182
- Joined: Wed Feb 29, 2012 5:20 pm
Re: Most manageable fluorocarbon?
It doesn't get any better than Tatsu from my experience.
Re: Most manageable fluorocarbon?
I would try this licorice ''limited special edition''
Its plenty manageable and if your hungry you can even take a bite.
Its plenty manageable and if your hungry you can even take a bite.
Re: Most manageable fluorocarbon?
Hogsticker2 wrote:It doesn't get any better than Tatsu from my experience.
X2
Re: Most manageable fluorocarbon?
Sunline Sniper for me
Re: Most manageable fluorocarbon?
I concur.BigG wrote:Sunline Sniper for me
Re: Most manageable fluorocarbon?
Same. It's the only one I tried that doesn't seem to want to explode into an unmanageable messBigG wrote:Sunline Sniper for me
Re: Most manageable fluorocarbon?
Of the ones I've tried, Sniper. Can't talk to Tatsu.
Re: Most manageable fluorocarbon?
Tatsu by a long shot.
- KlingerNOK
- Elite Angler
- Posts: 389
- Joined: Mon Feb 28, 2011 8:33 am
- Location: Ponca City, OK
Re: Most manageable fluorocarbon?
I haven't used Tatsu, but Invizx is noticeably more manageable than Sniper.
Re: Most manageable fluorocarbon?
I had a bad experience with Super FC Sniper, it was wound on to my spool by a correctly tightend spool tensioner and still every time I casted I found there were plenty of kinks and overruns under several layers of line.
Re: Most manageable fluorocarbon?
I've used sunline fc sniper, toray and seaguar red label, invizx, abrazx, and tatsu. In my opinion, tatsu is the best flourocarbon line out there right now. It's just expensive but it's well worth it. I've fished 4lb, 8lb, and 10lb tatsu so far and its castability, memory, and abrasion resistance is top-notch. If you're on a budget, then go for fc sniper or seaguar invizx. Otherwise, go with tatsu.
- Bassmar
- Platinum Angler
- Posts: 969
- Joined: Sun Feb 27, 2011 2:42 am
- Location: Cape Town, South Africa
Re: Most manageable fluorocarbon?
Tatsu all the way.
Re: Most manageable fluorocarbon?
How would something, say the JDM fluoro lines or Seaguar InvisX go?
- Hogsticker2
- Pro Angler
- Posts: 7182
- Joined: Wed Feb 29, 2012 5:20 pm
Re: Most manageable fluorocarbon?
Just get the Tatsu and be done with it. You're not going to find a better line.