Spilt Ring and Hook Replacement on 110's
Posted: Fri Dec 02, 2011 6:01 pm
Some of my 110's don't have a split ring. What is a high quality ring to get to put on it? Also what is a good hook to replace with the ones that come on the lure?
TackleTour
Spilt Ring and Hook Replacement on 110's
Page 1 of 1
Re: Spilt Ring and Hook Replacement on 110's
Posted: Fri Dec 02, 2011 9:21 pm
I've never seen them without split rings. How are the hooks currently attatched? I buy split rings in bulk from cabelas and have used them without issue. My typical aftermarket hooks are Gamakatsu short shanks. If you are parinoid about losing baits you can try Lure Saver split rings, though I had a bad experience with them when one released on a big Chequamegon bay smallmouth.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sat Dec 03, 2011 6:47 am
Some of them come without the ring on the line tie. You have two options: forgo the ring and just use a snap, or put a ring on. I like the oval rings on LC baits and use those...some use Owner Hyper Wire split rings, but I prefer those on hook hangars.LITTLE T wrote:Some of my 110's don't have a split ring. What is a high quality ring to get to put on it? Also what is a good hook to replace with the ones that come on the lure?
The hook can be purchased from Megabass USA. Call Catherine and she can help you out. On my 110s, I only use the stock hooks to get the proper weighting.
http://www.megabassusa.com/news/guide-u ... bait-hooks
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sat Dec 03, 2011 4:25 pm
The VMC Barberian outbarb is very close to the stock 110 hooks and they are working on my 110's so you may want to try them.Tokugawa wrote:Some of them come without the ring on the line tie. You have two options: forgo the ring and just use a snap, or put a ring on. I like the oval rings on LC baits and use those...some use Owner Hyper Wire split rings, but I prefer those on hook hangars.LITTLE T wrote:Some of my 110's don't have a split ring. What is a high quality ring to get to put on it? Also what is a good hook to replace with the ones that come on the lure?
The hook can be purchased from Megabass USA. Call Catherine and she can help you out. On my 110s, I only use the stock hooks to get the proper weighting.
http://www.megabassusa.com/news/guide-u ... bait-hooks
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sat Dec 03, 2011 7:53 pm
VMC makes the outbarb hook for Megabass USA.smalljaw wrote:The VMC Barberian outbarb is very close to the stock 110 hooks and they are working on my 110's so you may want to try them.Tokugawa wrote:Some of them come without the ring on the line tie. You have two options: forgo the ring and just use a snap, or put a ring on. I like the oval rings on LC baits and use those...some use Owner Hyper Wire split rings, but I prefer those on hook hangars.LITTLE T wrote:Some of my 110's don't have a split ring. What is a high quality ring to get to put on it? Also what is a good hook to replace with the ones that come on the lure?
The hook can be purchased from Megabass USA. Call Catherine and she can help you out. On my 110s, I only use the stock hooks to get the proper weighting.
http://www.megabassusa.com/news/guide-u ... bait-hooks
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sat Dec 03, 2011 8:03 pm
They are not the same tho. The 110 hook is slightly thinner than the Barbarian.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sat Dec 03, 2011 8:50 pm
I actually removed the split ring from mine, because I use the snap.
You only need the ring if you tie the lure directly.
You only need the ring if you tie the lure directly.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sun Dec 04, 2011 6:18 am
I have never tried a snap but it would be handy to change lures without re tieing. Will the snaps affect the way lure runs?
Re: Spilt Ring and Hook Replacement on 110's
Posted: Sun Dec 04, 2011 10:31 am
A snap permits the lure to work freely...just don't use one with a swivel.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Mon Dec 05, 2011 9:58 am
Just received two 110's Silent Risers.
One which comes in "American Power Jerkbait" box comes with split ring.
Another one in new Megabass box doesn't have it
All magnums I have came without split ring.
One which comes in "American Power Jerkbait" box comes with split ring.
Another one in new Megabass box doesn't have it
All magnums I have came without split ring.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Mon Dec 05, 2011 4:21 pm
Yea that is what alot of the one's I have ordered lately would be like. Some would come with rings and some without. That seems kinda what they are doing with the barbless hooks also.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Mon Dec 05, 2011 5:39 pm
Don't mean to hijack the thread, but am curious as to what are the blackish split rings that come stock on the 110s?
Re: Spilt Ring and Hook Replacement on 110's
Posted: Tue Dec 06, 2011 11:55 am
I usually leave the stock hook split rings on and switch the middle hook with owner st-36 and use an oval split ring for the front. Oval rings are easier to tie, for me at least.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Tue Dec 06, 2011 9:21 pm
I use Hyper wire split rings and Gamakatsu short shank hooks, you can go a hook size larger without the hooks tangling. A snap on the line tie sometimes can damage your line.
Re: Spilt Ring and Hook Replacement on 110's
Posted: Wed Dec 07, 2011 7:09 pm
Yea I was going to change those middle hooks out also. What size hooks did you put on the bait?damian_megabass wrote:I usually leave the stock hook split rings on and switch the middle hook with owner st-36 and use an oval split ring for the front. Oval rings are easier to tie, for me at least.