UL BFS Rod Lengths - please suggest
-
- Platinum Angler
- Posts: 1336
- Joined: Tue Jun 15, 2004 2:32 pm
UL BFS Rod Lengths - please suggest
Greetings All,
I've been absolutely fascinated by the whole BFS for UL jigs - down to about 1.2 grams or less. So I'm thinking of building a rod as I have a bunch of UL blanks from sub 5' to my longest single piece 8' blanks.
So I have a question. Why is it that most of you with BFS seem to prefer sub 6' rods? If I have plenty of room to cast, any reason not to do 6' 6" or 7' or even 8' rods if they are soft enough to cast the UL lures just fine?
I ask as I generally go for 7' rods for more casting distance using spinning reels.
Thanks!
ps: And yes, I'm going to build a sub 5' rod to try underhanded cast to see if I can get more control and softer water entry with the lures for very finicky trout so I am not against short rods.
I've been absolutely fascinated by the whole BFS for UL jigs - down to about 1.2 grams or less. So I'm thinking of building a rod as I have a bunch of UL blanks from sub 5' to my longest single piece 8' blanks.
So I have a question. Why is it that most of you with BFS seem to prefer sub 6' rods? If I have plenty of room to cast, any reason not to do 6' 6" or 7' or even 8' rods if they are soft enough to cast the UL lures just fine?
I ask as I generally go for 7' rods for more casting distance using spinning reels.
Thanks!
ps: And yes, I'm going to build a sub 5' rod to try underhanded cast to see if I can get more control and softer water entry with the lures for very finicky trout so I am not against short rods.
-
- Senior Angler
- Posts: 96
- Joined: Wed Dec 14, 2016 10:08 pm
Re: UL BFS Rod Lengths - please suggest
If you have "plenty of room to cast" and "generally go for 7' rods for more casting distance using spinning reels" then by all means build a 7' rod.
I generally use 5'3" or 4'5" rods because I mostly fish medium to small streams. Casting room is often restricted and longer casting distance would just put the lure in the bushes.
I generally use 5'3" or 4'5" rods because I mostly fish medium to small streams. Casting room is often restricted and longer casting distance would just put the lure in the bushes.
Chris Stewart
(affiliations: TenkaraBum.com, Finesse-Fishing.com)
(affiliations: TenkaraBum.com, Finesse-Fishing.com)
-
- TT Moderator
- Posts: 6804
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: UL BFS Rod Lengths - please suggest
Small streams and short casts from brush-filled banks demand a short rod. If theres no obstructions around you, a longer rod just works better imo. My ultralight casting rod is built on a 7' Immortal popping blank and I love using it for small cranks and inline spinners. I have no problem with accuracy, either.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: UL BFS Rod Lengths - please suggest
I prefer a rod in the range of 6.5' and only use shorter when fishing creeks and small streams. I have one rod that's 7'3" and don't use it much, not sure why ?
Re: UL BFS Rod Lengths - please suggest
No reason not to use 6+ feet if most of your fishing is open. Short rods shine for tight quarters and accurate casting which is pretty much what BFS was invented for so naturally short rods are more prevalent. Use what fits your situation.
Just remember it's easier to use a short rod in the open than it is to use a long one in tight streams.
Just remember it's easier to use a short rod in the open than it is to use a long one in tight streams.
Re: UL BFS Rod Lengths - please suggest
I have built several BFS rods on ultra light spinning blanks and they work great. The length does somethings much better than a short rod. I do not, by and large, fish tiny creeks and in the larger creeks/small rivers that I fish the extra reach works great. I have a couple that are built on dropshot spinning blanks, of course these are possibly not ultra light, but they throw 1/16 oz wonderfully. I have a couple that are under 6 feet and find them less enjoyable to fish. Between 6' and 7' are probably where I will stay and I am not worried about casting 1/64 anything. Hope this helps.
-
- Platinum Angler
- Posts: 1336
- Joined: Tue Jun 15, 2004 2:32 pm
Re: UL BFS Rod Lengths - please suggest
Thank you everyone! What a great forum. very much appreciate all the help in sharing your experiences.
Re: UL BFS Rod Lengths - please suggest
Long rods will always give you better leverage, longer casts and easier to turn a fish. Short rods are perfect for tight quarters where a long rod will just get hung up.
Re: UL BFS Rod Lengths - please suggest
Just to add to all the great info already given.
For me, I don't like my BFS rods to be to "whippy." A decent quality blank is a must. I like light tips, with fast actions, at around 6'6-6'10. I want to be able to react quicker to bites, and have a chance to keep bites away from nearby structure before it's to late.
I do best with two rods in my BFS lineup. One for small jigs/plastics, and one for small cranks.
The Corto 6'10" spinning blank with just a tad bit more power, made into a casting rod would be perfect for me.
A personal favorite of mine is the Megabass Super Eiger X7, but it is more of a light power.
For me, I don't like my BFS rods to be to "whippy." A decent quality blank is a must. I like light tips, with fast actions, at around 6'6-6'10. I want to be able to react quicker to bites, and have a chance to keep bites away from nearby structure before it's to late.
I do best with two rods in my BFS lineup. One for small jigs/plastics, and one for small cranks.
The Corto 6'10" spinning blank with just a tad bit more power, made into a casting rod would be perfect for me.
A personal favorite of mine is the Megabass Super Eiger X7, but it is more of a light power.
Get your kids hooked on fishing, and they'll never have any money for drugs or alcohol.
Re: UL BFS Rod Lengths - please suggest
I agree.Craigthor wrote:Long rods will always give you better leverage, longer casts and easier to turn a fish. Short rods are perfect for tight quarters where a long rod will just get hung up.
I use many different rods in 5’4” and up to 9’6”. The longer rods perform well in some tight-ish quarters, e.g. they help where I have to reach beyond vegetation. Some reels do not work well with the longer moderate action rods, at least that is my experience.
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: UL BFS Rod Lengths - please suggest
Definitely a crisp blank. A "sloppy blank will cut down on casting distance, accuracy too.zodiak311 wrote:Just to add to all the great info already given.
For me, I don't like my BFS rods to be to "whippy." A decent quality blank is a must. I like light tips, with fast actions, at around 6'6-6'10. I want to be able to react quicker to bites, and have a chance to keep bites away from nearby structure before it's to late.
I do best with two rods in my BFS lineup. One for small jigs/plastics, and one for small cranks.
The Corto 6'10" spinning blank with just a tad bit more power, made into a casting rod would be perfect for me.
A personal favorite of mine is the Megabass Super Eiger X7, but it is more of a light power.
I am building 3 BFS rods using the IM 4'6" FW blanks. Not as light as my noodle Tsurinoya rod but, they hot a light tip and decent amount of flex. Quick recovery too.
IG @hobie_wan_kenobi_fishing