Snaps
-
- Elite Angler
- Posts: 372
- Joined: Thu Aug 08, 2013 11:13 am
- Location: Lake Lanier - Flowery Branch, GA
Snaps
Due to low line capacity of BFS spools I was wondering if using a snap would be a good idea in order to save some line. Would it greatly alter or kill the action of small lures like a Pins minnow or even a MB Baby Griffon? If not then what size is recommended?
just hotdogin it
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Snaps
Try looking into the Cultiva Tairiki Snap size 000. They are TINY and do not hinder the action of lures like other snaps do
IG @hobie_wan_kenobi_fishing
- BRONZEBACK32
- Pro Angler
- Posts: 2234
- Joined: Sun Dec 18, 2011 8:44 pm
- Location: Utah
Re: Snaps
Braid to leader is another option.
Re: Snaps
Correctly sized snaps rather enhance the lure action as the lure can move around freely. For the same reason hard lures come with split rings to tie on right? If you swap out the split ring and rather use a snap you’re just saving line and time.
000 can turn out super small, 00 is the smallest I usually go.
AND 8-braid to leader to I crease casting distance.
Honestly, I don’t get why tying on directly would be a benefit (ok maybe for punching but you don’t do that with bfs gear). Here in Germany we always use them, over in America they seem super uncommon. Why tho?
000 can turn out super small, 00 is the smallest I usually go.
AND 8-braid to leader to I crease casting distance.
Honestly, I don’t get why tying on directly would be a benefit (ok maybe for punching but you don’t do that with bfs gear). Here in Germany we always use them, over in America they seem super uncommon. Why tho?
-
- Elite Angler
- Posts: 372
- Joined: Thu Aug 08, 2013 11:13 am
- Location: Lake Lanier - Flowery Branch, GA
Re: Snaps
Thanks for the info and recommendations. I understand the purpose of split rings allowing for more freedom, but wasn't sure if the shape, size, and added weight of a snap would hinder an already lightweight lure.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
just hotdogin it
- Hobie-Wan Kenobi
- Pro Angler
- Posts: 3014
- Joined: Tue Apr 08, 2014 1:25 pm
- Location: Michigan (U.P)
- Contact:
Re: Snaps
I should add that I usually take the split ring off if using snaps for tiny cranks. Much better actionhotdogin wrote: ↑Thu Jan 30, 2020 9:22 amThanks for the info and recommendations. I understand the purpose of split rings allowing for more freedom, but wasn't sure if the shape, size, and added weight of a snap would hinder an already lightweight lure.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
IG @hobie_wan_kenobi_fishing
Re: Snaps
X2Hobie-Wan Kenobi wrote: ↑Thu Jan 30, 2020 10:37 amI should add that I usually take the split ring off if using snaps for tiny cranks. Much better actionhotdogin wrote: ↑Thu Jan 30, 2020 9:22 amThanks for the info and recommendations. I understand the purpose of split rings allowing for more freedom, but wasn't sure if the shape, size, and added weight of a snap would hinder an already lightweight lure.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
I typically remove split rings and use a snap or less often attach a solid ring to the split ring if not using a snap. I am not too happy with thin line (esp braid) rubbing against the edge of a split ring.
Re: Snaps
I feel the same way. Maybe it's a confidence thing, but I think the knot is much more durable when tied around the single round diameter of a wire snap. I use them on virtually all hard baits, not just the ultra light ones.Dalleinf wrote: ↑Thu Jan 30, 2020 11:27 amX2Hobie-Wan Kenobi wrote: ↑Thu Jan 30, 2020 10:37 amI should add that I usually take the split ring off if using snaps for tiny cranks. Much better actionhotdogin wrote: ↑Thu Jan 30, 2020 9:22 amThanks for the info and recommendations. I understand the purpose of split rings allowing for more freedom, but wasn't sure if the shape, size, and added weight of a snap would hinder an already lightweight lure.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
I typically remove split rings and use a snap or less often attach a solid ring to the split ring if not using a snap. I am not too happy with thin line (esp braid) rubbing against the edge of a split ring.
-
- Elite Angler
- Posts: 420
- Joined: Tue Jul 01, 2014 12:28 am
Re: Snaps
Dalleinf wrote: ↑Thu Jan 30, 2020 11:27 amYou an get oval shaped split rings which pretty much eliminate knots migrating around the ring. Mustad make them and Daiwa used them on the small Woofer vibes.Hobie-Wan Kenobi wrote: ↑Thu Jan 30, 2020 10:37 amI should add that I usually take the split ring off if using snaps for tiny cranks. Much better actionhotdogin wrote: ↑Thu Jan 30, 2020 9:22 amThanks for the info and recommendations. I understand the purpose of split rings allowing for more freedom, but wasn't sure if the shape, size, and added weight of a snap would hinder an already lightweight lure.
For general bass fishing I was always somewhat discouraged from using snaps because of the added bulk. I was under the impression that the less hardware at the end of the line was better for a more natural look.
I typically remove split rings and use a snap or less often attach a solid ring to the split ring if not using a snap. I am not too happy with thin line (esp braid) rubbing against the edge of a split ring.
Re: Snaps
I've had some bad experiences with snaps - I've recently started using Mustad Fastach clips in the smallest size and pulled hard on them and so far so good. With my deteriorating eyesight and clumsiness, I find lure changes super easy with it as long as lure eye isn't obstructed (like with poppers). For river fishing (spinners, plugs and SPs), I won't use anything else. They aren't any good for super small lures (<1.5")which I don't often use anyway.