stripped screw handle

[Jdw2920]

i have a handle with the screws stripped how can i get it out

[beezy]

i have a handle with the screws stripped how can i get it out

I'd recommend you buy the "Speedout Screw Extractor" kit that can be bought from walmart for about $20. If the screw is too small, use a small drill bit first before using the speedout screw extractor. This is what I used to remove the Daiwa screw of death (drive gear handle screw) from my pixy reel.

[Jdw2920]

thank you. yea i tried my extractor kit but didnt get it out

[e_bassfisher]

1/16" drill bit and a #1 size extractor....the 1/16" drill bit is a little smaller than the recommended 3/32, so you do not have to drill in as far before the extractor will catch

[Jdw2920]

will try it in morning thank you. where can i order some neescrews

[e_bassfisher]

will try it in morning thank you. where can i order some neescrews

i have them, you can email me at reel_tuner@yahoo.com

i am sure you can also get the from the tackle trap too

[Jdw2920]

once i get them out ill send you an email