New 2019 Stella SW
New 2019 Stella SW
I'll post more detailed info soon. For now here's a link to our website:
http://fish.shimano.com/content/fish/no ... _BACK.html
http://fish.shimano.com/content/fish/no ... _BACK.html
-
- Angler
- Posts: 45
- Joined: Thu Jun 02, 2016 11:29 pm
Re: New 2019 Stella SW
thanks Dan! Are additional models (meaning sizes) coming in the future or is it scaled down permanently?
Re: New 2019 Stella SW
Additional sizes will be later, possibly next year.
Re: New 2019 Stella SW
The 8000 size now has a smaller rotor. This means the spools will not interchange between the 8000, 10000 and 14000 sizes. The 8000 size reel is for braided line only. It is not designed for use with mono line.
Infinity Drive is a friction reducing design for the spool shaft. This eliminates the spool shaft from touching the pinion gear under heavy loads. The result is a handle that is much easier to turn under a load.
Heat Sink drag utilizes a heat sink plate and some other components to pull heat away from the spool. The result is less drag fade with temperature and reduced damage to line. Braided line and 212 degree heat do not get along. In a long battle the spool temps can peak close to that which causes the line to lose strength. The end result is about a 30% reduction in heat on the spool near the drag surfaces.
Silent Tune reduces play in some small parts to eliminate the clicks and other noises that can be present in a spinning reel. The drive gear was also redesigned to make less noise and improve the durability slightly.
X Protect line roller is a new high water resistant design which makes the line roller bearings last 10 times longer. The line roller bearings are the first to take punishment of the salt.
The rotor weights and designs have been changed to reduce inertia. This means easier start and stop of the rotor while working lures.
The handles have changed slightly to make it easier to convey power.
Infinity Drive is a friction reducing design for the spool shaft. This eliminates the spool shaft from touching the pinion gear under heavy loads. The result is a handle that is much easier to turn under a load.
Heat Sink drag utilizes a heat sink plate and some other components to pull heat away from the spool. The result is less drag fade with temperature and reduced damage to line. Braided line and 212 degree heat do not get along. In a long battle the spool temps can peak close to that which causes the line to lose strength. The end result is about a 30% reduction in heat on the spool near the drag surfaces.
Silent Tune reduces play in some small parts to eliminate the clicks and other noises that can be present in a spinning reel. The drive gear was also redesigned to make less noise and improve the durability slightly.
X Protect line roller is a new high water resistant design which makes the line roller bearings last 10 times longer. The line roller bearings are the first to take punishment of the salt.
The rotor weights and designs have been changed to reduce inertia. This means easier start and stop of the rotor while working lures.
The handles have changed slightly to make it easier to convey power.
Re: New 2019 Stella SW
Just booked the keys for July.
Was hoping to have a new 6000 by then.
Oh well might go 14000 first
Thanks
Was hoping to have a new 6000 by then.
Oh well might go 14000 first
Thanks
Re: New 2019 Stella SW
Great summary of the new features. I have 3 non-saltwater Stellas, one C2000C and two 4000XG models, and they have all been super performers in the salt over many years. The heat sink and improved roller bearing design are very welcome developments, especially for larger fish.Bantam1 wrote:The 8000 size now has a smaller rotor. This means the spools will not interchange between the 8000, 10000 and 14000 sizes. The 8000 size reel is for braided line only. It is not designed for use with mono line.
Infinity Drive is a friction reducing design for the spool shaft. This eliminates the spool shaft from touching the pinion gear under heavy loads. The result is a handle that is much easier to turn under a load.
Heat Sink drag utilizes a heat sink plate and some other components to pull heat away from the spool. The result is less drag fade with temperature and reduced damage to line. Braided line and 212 degree heat do not get along. In a long battle the spool temps can peak close to that which causes the line to lose strength. The end result is about a 30% reduction in heat on the spool near the drag surfaces.
Silent Tune reduces play in some small parts to eliminate the clicks and other noises that can be present in a spinning reel. The drive gear was also redesigned to make less noise and improve the durability slightly.
X Protect line roller is a new high water resistant design which makes the line roller bearings last 10 times longer. The line roller bearings are the first to take punishment of the salt.
The rotor weights and designs have been changed to reduce inertia. This means easier start and stop of the rotor while working lures.
The handles have changed slightly to make it easier to convey power.
Re: New 2019 Stella SW
The line roller is always an issue with the spinning reels. The engineers have been working with many designs for a few years now before finally getting it right with the SW. I hope to see this design trickle down to other models in the future.
- Impreza619
- Senior Angler
- Posts: 61
- Joined: Tue May 06, 2014 2:22 am
Re: New 2019 Stella SW
Can the line roller be upgraded on the previous SW?
Re: New 2019 Stella SW
It will not fit due to changes int he dimensions and design.
- Impreza619
- Senior Angler
- Posts: 61
- Joined: Tue May 06, 2014 2:22 am
Re: New 2019 Stella SW
Thanks for the reply. I guess a new stella is on the xmas list for me.