Need help on drag star
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Need help on drag star
My first attempt at adding some color to reels has proven to be expensive and a new learning experience. I ordered this star for my Bantam MGL but when installed the clip pops out and creates an uneven gap between the star and they handle. Even cranking it down tight is will pop out when adjusting the drag.
The original spacer is to thick and will not fit over the top of the clip to hold it down.
Anyone have any ideas?
The original spacer is to thick and will not fit over the top of the clip to hold it down.
Anyone have any ideas?
- Attachments
-
- thumbnail (3).jpg (74.96 KiB) Viewed 7300 times
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Re: Need help on drag star
Yes
- Attachments
-
- thumbnail (21).jpg (43.37 KiB) Viewed 7269 times
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Need help on drag star
Does it fit together well when not installed on the reel?
Or does the clip still slip out easily?
Or does the clip still slip out easily?
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Re: Need help on drag star
It fits fine prior to installation. It seem to not fit on the shaft correctly - the clip and the clicker underneath are being pushed up to the point of the clip popping off when the star is pushed down onto the shaft.
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: Need help on drag star
Sounds like some misalignment upon installation.
1. Make sure the flat side on the nut is parallel with the flat side on the drive shaft.
2. Line the flat side of the clicker plate up with the flat side inside the drag star.
3. Install drag star and be sure the shoulder of the driveshaft passes through the clicker plate.
4. While keeping pressure on the drag star to keep it in place, install your handle, and nut.
These new style drag stars with the compact spring can be a pain.
1. Make sure the flat side on the nut is parallel with the flat side on the drive shaft.
2. Line the flat side of the clicker plate up with the flat side inside the drag star.
3. Install drag star and be sure the shoulder of the driveshaft passes through the clicker plate.
4. While keeping pressure on the drag star to keep it in place, install your handle, and nut.
These new style drag stars with the compact spring can be a pain.
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Re: Need help on drag star
Pushing the star down over the top of the shoulder puts so much pressure on the bottom of the plate on the star that it pops the clip off.....
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish
- LgMouthGambler
- Pro Angler
- Posts: 2529
- Joined: Thu Jan 17, 2013 7:04 am
- Location: S FL
Re: Need help on drag star
I wonder if you just have to file the hole out a bit more? Maybe it's just a bit too small to not allow it to slide over the shaft correctly?
<")))><{
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Re: Need help on drag star
They are sending me another to try-Excellent customer service as they have walked me through the install to no avail....
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish
-
- Elite Angler
- Posts: 373
- Joined: Mon Mar 13, 2017 1:12 pm
- Location: OREGON
- Contact:
Re: Need help on drag star
Update- New drag star arrived in 6 days and fits perfect without the retainer popping out.
Kudos to Hedgehog!
Kudos to Hedgehog!
Our tradition is that of the first who sneaked away to the creek when tribe did not really need fish