TD Fuego Spools
Re: TD Fuego Spools
I can highly recommend j-dream spools.
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: TD Fuego Spools
Your Fuego has the same magnets as a TD-Z so that Ito spool is still going to need a lot of thumb to control.
A Type R+ spool and HLC spring will really wake up the 100M.
A Type R+ spool and HLC spring will really wake up the 100M.
-
- Elite Angler
- Posts: 628
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: TD Fuego Spools
Is the HLC spring stiffer than a R+?adam lancia wrote: ↑Sat Oct 05, 2019 3:00 amYour Fuego has the same magnets as a TD-Z so that Ito spool is still going to need a lot of thumb to control.
A Type R+ spool and HLC spring will really wake up the 100M.
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: TD Fuego Spools
That I'm not sure of, but I think it is.MountainMan 83 wrote: ↑Sat Oct 05, 2019 4:50 amIs the HLC spring stiffer than a R+?adam lancia wrote: ↑Sat Oct 05, 2019 3:00 amYour Fuego has the same magnets as a TD-Z so that Ito spool is still going to need a lot of thumb to control.
A Type R+ spool and HLC spring will really wake up the 100M.
Re: TD Fuego Spools
MountainMan 83 wrote: ↑Sat Oct 05, 2019 4:50 amIs the HLC spring stiffer than a R+?adam lancia wrote: ↑Sat Oct 05, 2019 3:00 amYour Fuego has the same magnets as a TD-Z so that Ito spool is still going to need a lot of thumb to control.
A Type R+ spool and HLC spring will really wake up the 100M.
Yes.
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: TD Fuego Spools
I just put a steez 103 r+ spool in my tdz and i love it. Would adding a r+ inductor and spring to the 100m spool basically make it a 36mm Tdz 103 r+ spool in the Fuego?adam lancia wrote: ↑Tue Jul 30, 2019 2:51 amYup that's the one.chrisg_sdcf wrote: ↑Mon Jul 29, 2019 7:06 amI ended up buying a 100m spool but is this the red PE Spool that you were referring to?adam lancia wrote: ↑Mon Jul 29, 2019 3:20 amI was able to get a couple of inductors directly from Daiwa but that was a little while ago. I've heard that their parts supply side of things hasn't been on the ball lately. You might want to call and find out if you can get it. The stock inductor isn't bad by any stretch, it's just that the R+ really frees it up without making it insane.chrisg_sdcf wrote: ↑Sat Jul 27, 2019 9:41 amBesides the 100m spool being hard to find, is the r+ inductor available from online sources?adam lancia wrote: ↑Sat Jul 27, 2019 3:42 amJust a note to go with my vote for the 100M. Add an R+ inductor and HLC spring and that'll make it an amazingly versatile spool. Really frees it up without making it unnecessarily wild.
One other thing you might want to know about is that there are two red PE Special spools. One is the I'ze Factory one that isn't ported, and the other is the stock spool that comes with the red and blue 7.9 PE Special (it's slotted). That might be the one some folks are thinking about when commenting. The stock, slotted spool is harder to come by.
https://japantackle.com/tuning-parts/sp ... 00983.html
It's the one I meant when I started the post. I actually didn't know about the I'ze red PE Spool. Thanks for the info.
Enjoy the 100M stock, but try to get an R+ inductor and HLC spring, just for fun
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: TD Fuego Spools
That's exactly what it does, you owe yourself to try it.chrisg_sdcf wrote: ↑Tue Oct 15, 2019 12:32 amI just put a steez 103 r+ spool in my tdz and i love it. Would adding a r+ inductor and spring to the 100m spool basically make it a 36mm Tdz 103 r+ spool in the Fuego?adam lancia wrote: ↑Tue Jul 30, 2019 2:51 amYup that's the one.chrisg_sdcf wrote: ↑Mon Jul 29, 2019 7:06 amI ended up buying a 100m spool but is this the red PE Spool that you were referring to?adam lancia wrote: ↑Mon Jul 29, 2019 3:20 amI was able to get a couple of inductors directly from Daiwa but that was a little while ago. I've heard that their parts supply side of things hasn't been on the ball lately. You might want to call and find out if you can get it. The stock inductor isn't bad by any stretch, it's just that the R+ really frees it up without making it insane.chrisg_sdcf wrote: ↑Sat Jul 27, 2019 9:41 am
Besides the 100m spool being hard to find, is the r+ inductor available from online sources?
One other thing you might want to know about is that there are two red PE Special spools. One is the I'ze Factory one that isn't ported, and the other is the stock spool that comes with the red and blue 7.9 PE Special (it's slotted). That might be the one some folks are thinking about when commenting. The stock, slotted spool is harder to come by.
https://japantackle.com/tuning-parts/sp ... 00983.html
It's the one I meant when I started the post. I actually didn't know about the I'ze red PE Spool. Thanks for the info.
Enjoy the 100M stock, but try to get an R+ inductor and HLC spring, just for fun
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: TD Fuego Spools
I don't know why I didn't realize that sooner loladam lancia wrote: ↑Tue Oct 15, 2019 3:30 amThat's exactly what it does, you owe yourself to try it.chrisg_sdcf wrote: ↑Tue Oct 15, 2019 12:32 amI just put a steez 103 r+ spool in my tdz and i love it. Would adding a r+ inductor and spring to the 100m spool basically make it a 36mm Tdz 103 r+ spool in the Fuego?adam lancia wrote: ↑Tue Jul 30, 2019 2:51 amYup that's the one.chrisg_sdcf wrote: ↑Mon Jul 29, 2019 7:06 amI ended up buying a 100m spool but is this the red PE Spool that you were referring to?adam lancia wrote: ↑Mon Jul 29, 2019 3:20 am
I was able to get a couple of inductors directly from Daiwa but that was a little while ago. I've heard that their parts supply side of things hasn't been on the ball lately. You might want to call and find out if you can get it. The stock inductor isn't bad by any stretch, it's just that the R+ really frees it up without making it insane.
One other thing you might want to know about is that there are two red PE Special spools. One is the I'ze Factory one that isn't ported, and the other is the stock spool that comes with the red and blue 7.9 PE Special (it's slotted). That might be the one some folks are thinking about when commenting. The stock, slotted spool is harder to come by.
https://japantackle.com/tuning-parts/sp ... 00983.html
It's the one I meant when I started the post. I actually didn't know about the I'ze red PE Spool. Thanks for the info.
Enjoy the 100M stock, but try to get an R+ inductor and HLC spring, just for fun
-
- Elite Angler
- Posts: 628
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: TD Fuego Spools
I recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
-
- Platinum Angler
- Posts: 1464
- Joined: Sat May 10, 2014 12:24 pm
- Location: Donkin, Nova Scotia
Re: TD Fuego Spools
Dem Bama boys are a good source for that sort of thing.MountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: TD Fuego Spools
Tackle trap had them not to long ago but I didn't buy oneMountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
If you find some let me know please.
Thanks
-
- Elite Angler
- Posts: 628
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: TD Fuego Spools
Will do!chrisg_sdcf wrote: ↑Tue Oct 15, 2019 5:20 pmTackle trap had them not to long ago but I didn't buy oneMountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
If you find some let me know please.
Thanks
-
- Elite Angler
- Posts: 485
- Joined: Sun Sep 16, 2012 11:05 am
Re: TD Fuego Spools
MountainMan 83 wrote: ↑Wed Oct 16, 2019 3:30 amWill do!chrisg_sdcf wrote: ↑Tue Oct 15, 2019 5:20 pmTackle trap had them not to long ago but I didn't buy oneMountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
If you find some let me know please.
Thanks
We’ve got some on order here at The Tackle Trap. These are starting to get harder to acquire, but we will have quite a few.
Last edited by PikeRoadBassn on Wed Oct 16, 2019 8:45 pm, edited 1 time in total.
-
- Elite Angler
- Posts: 628
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: TD Fuego Spools
Awesome! Thank you.PikeRoadBassn wrote: ↑Wed Oct 16, 2019 12:30 pmMountainMan 83 wrote: ↑Wed Oct 16, 2019 3:30 amWill do!chrisg_sdcf wrote: ↑Tue Oct 15, 2019 5:20 pmTackle trap had them not to long ago but I didn't buy oneMountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
If you find some let me know please.
Thanks
We’ve got some on order here at The a Tackle Trap. These are starting to get harder to acquire, but we will have quite a few.
-
- Platinum Angler
- Posts: 896
- Joined: Sat May 25, 2019 6:27 pm
Re: TD Fuego Spools
Have you had a chance to try it yet?MountainMan 83 wrote: ↑Wed Oct 16, 2019 12:34 pmAwesome! Thank you.PikeRoadBassn wrote: ↑Wed Oct 16, 2019 12:30 pmMountainMan 83 wrote: ↑Wed Oct 16, 2019 3:30 amWill do!chrisg_sdcf wrote: ↑Tue Oct 15, 2019 5:20 pmTackle trap had them not to long ago but I didn't buy oneMountainMan 83 wrote: ↑Tue Oct 15, 2019 11:13 amI recently picked up another 100M spool from Adam for a Zillion project. Looks like I'm going to have to try the rotor and spring swap.
Where are you guys sourcing the R+ rotor? Does Daiwa USA have them? or can dem good ol boys in Bama find them?
If you find some let me know please.
Thanks
We’ve got some on order here at The a Tackle Trap. These are starting to get harder to acquire, but we will have quite a few.