Uses for Copoly?
Uses for Copoly?
What setups are you guys using Copoly for? I've never used it for anything and I see a lot of you mentioning line like CXX.
-
- TT Moderator
- Posts: 6801
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Uses for Copoly?
I use it for anything bottom contact, because I HATE flouro. Too many unexplained breakouts, even with lines like super hard upgrade and tatsu.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: Uses for Copoly?
So you would use Copoly for jigs? What do you use for Trigs hoohoorjoo? I've always just used straight braid for everything because that's how I was taught but I'm starting to expand my horizons lol.hoohoorjoo wrote: ↑Wed Feb 26, 2020 11:05 amI use it for anything bottom contact, because I HATE flouro. Too many unexplained breakouts, even with lines like super hard upgrade and tatsu.
-
- TT Moderator
- Posts: 6801
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Uses for Copoly?
I use straight braid for most things myself, as well. But on sandy or rocky bottoms, braid doesn't hold up very well. In those instances, I like p-line cxx and sufix siege, at least 17# test, and most times 20#.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: Uses for Copoly?
What do you use for lipless cranks and square bills?hoohoorjoo wrote: ↑Wed Feb 26, 2020 2:47 pmI use straight braid for most things myself, as well. But on sandy or rocky bottoms, braid doesn't hold up very well. In those instances, I like p-line cxx and sufix siege, at least 17# test, and most times 20#.
-
- TT Moderator
- Posts: 6801
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Uses for Copoly?
I use both mono and braid for squarebills and lipless cranks. It depends on the situation-braid around wood cover, mono around rocks. If the drag is set correctly, braid works better for lipless baits imo, especially out in deeper water. Braid also helps when ripping a bait free from grass to draw those reaction bites.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: Uses for Copoly?
You dont have a lot of issues running straight braid and it tangling in the hooks?hoohoorjoo wrote: ↑Wed Feb 26, 2020 3:43 pmI use both mono and braid for squarebills and lipless cranks. It depends on the situation-braid around wood cover, mono around rocks. If the drag is set correctly, braid works better for lipless baits imo, especially out in deeper water. Braid also helps when ripping a bait free from grass to draw those reaction bites.
-
- TT Moderator
- Posts: 6801
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: Uses for Copoly?
Not much hook fouling, just every so often. I have learned how to cast and let a lure splash down without tangling most times. It's a worthy tradeoff imo. With braid, I can get most lures back by straightening the hooks if I snag them in timber, which I fish a lot of.
Try not to let your mind wander. It is much too small to be outside unsupervised.
-
- Elite Angler
- Posts: 420
- Joined: Tue Jul 01, 2014 12:28 am
Re: Uses for Copoly?
If you feather the spool just before touchdown, the lure will orient itself and eliminate almost all tangles. After that, dont over work the lipless crank. Good quality ones are well balanced and shouldn't tangle, but poor quality ones can be overworked resulting in tangles.jlang95 wrote: ↑Wed Feb 26, 2020 5:03 pmYou dont have a lot of issues running straight braid and it tangling in the hooks?hoohoorjoo wrote: ↑Wed Feb 26, 2020 3:43 pmI use both mono and braid for squarebills and lipless cranks. It depends on the situation-braid around wood cover, mono around rocks. If the drag is set correctly, braid works better for lipless baits imo, especially out in deeper water. Braid also helps when ripping a bait free from grass to draw those reaction bites.
Re: Uses for Copoly?
I use copoly for topwater and squarebills. Braid for chatterbaits. For everything else, I use flouro.
Re: Uses for Copoly?
I'm not a huge fan of fluorocarbon. I use copolymer for deep cranking , topwater and worm/jig.
Gamma Polyflex is a good one , so is McCoys.
I have a stockpile of Silver Thread AN40 and Silver Thread Super.
Pradco just recently discontinued Silver Thread , so I stocked up from a local tackle shop.
Gamma Polyflex is a good one , so is McCoys.
I have a stockpile of Silver Thread AN40 and Silver Thread Super.
Pradco just recently discontinued Silver Thread , so I stocked up from a local tackle shop.
Last edited by johnD on Mon Mar 02, 2020 9:19 am, edited 1 time in total.
Re: Uses for Copoly?
I'm a big fan of fluorocarbon but its not the best choice for every application. For topwater poppers and walkers, I want a floating line with some stretch to help keep the fish hooked. Copoly or mono works well. For squarebills, I like a heavier line with some stretch and use 16lb copoly. I fish chatterbaits in heavy grass and want a strong line that cuts through the grass and can muscle the fish out of grass. 40 lb braid gets this done. Just make sure your rod has some tip. For everything else, fluorocarbon works well, for me at least.
Re: Uses for Copoly?
You dont have issues with breakage? Everything I hear about fluorocarbon, guys are always saying the have a lot of break offs. How's the sensitivity with fluoro compared to braid?njbasscat wrote: ↑Mon Mar 02, 2020 7:38 amI'm a big fan of fluorocarbon but its not the best choice for every application. For topwater poppers and walkers, I want a floating line with some stretch to help keep the fish hooked. Copoly or mono works well. For squarebills, I like a heavier line with some stretch and use 16lb copoly. I fish chatterbaits in heavy grass and want a strong line that cuts through the grass and can muscle the fish out of grass. 40 lb braid gets this done. Just make sure your rod has some tip. For everything else, fluorocarbon works well, for me at least.
Re: Uses for Copoly?
No issues with breakage. Be careful tying your knots and you will be ok. If you get a bad backlash, that could cause issues because heat caused by friction can create weak spots in the line. One you get used to casting with it, you shouldn't have any issues. The sensitivity depends on the line. Easy casting soft fluorocarbon is less sensitive than hard fluorocarbon. Hard fluorocarbon will also be more abrasion resistant. Fluorocarbon sensitivity is great for slack line presentations. I've been using it for years and the stuff today is vastly superior than what we had 10 or 12 years ago.