Show off your latest and greatest catch, purchase, or acquisition with fellow TT Forum members.
-
goldrod
- Pro Angler
- Posts: 6255
- Joined: Sat Jun 02, 2007 4:30 pm
Post
by goldrod » Fri Jun 19, 2020 8:09 pm
hoohoorjoo wrote: ↑Fri Jun 19, 2020 7:14 pm
I was wondering when you were gonna post those, Jorrick. Heck, I almost posted them the other day, hoping to get you to own them.
Thanks Tim , they are a pleasure to fish
Thank you too Rick
I was so happy when that IS79 came together with the purple parts.
Took it on base pitching a lure and kept getting bit. It was so crazy that I stopped using that setup because I wanted to see what it was about it that the fish kept biting it. It’s on a Gambler rod. I like the Steez and Adrena setup
Although they both have sv spools they have different personalities.
For by him were all things created, that are in heaven, and that are in earth, visible and invisible
-
MountainMan 83
- Elite Angler
- Posts: 650
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Post
by MountainMan 83 » Sat Jun 20, 2020 5:25 am
Aquaftm45 wrote: ↑Sat Jun 20, 2020 3:40 am
Is your Daiwa too janky to post on this thread? Here is a solution.
3d carbon.jpg
reckit.jpg
carbun.jpg
That gives me anxiety just looking at that sheet of stickers.
-
Aquaftm45
- Platinum Angler
- Posts: 1087
- Joined: Sun Dec 17, 2017 7:50 pm
Post
by Aquaftm45 » Sat Jun 20, 2020 5:58 am
MountainMan 83 wrote: ↑Sat Jun 20, 2020 5:25 am
Aquaftm45 wrote: ↑Sat Jun 20, 2020 3:40 am
Is your Daiwa too janky to post on this thread? Here is a solution.
3d carbon.jpg
reckit.jpg
carbun.jpg
That gives me anxiety just looking at that sheet of stickers.
I’m with ya...if any constellation, it’s real carbon sheet
-
goldrod
- Pro Angler
- Posts: 6255
- Joined: Sat Jun 02, 2007 4:30 pm
Post
by goldrod » Sat Jun 20, 2020 8:30 am
Stickers
STICKERS..........
For by him were all things created, that are in heaven, and that are in earth, visible and invisible
-
LowRange
- Pro Angler
- Posts: 4806
- Joined: Wed Jun 15, 2016 9:18 am
Post
by LowRange » Sat Jun 20, 2020 8:49 am
I'm going to do that to a T3 MX with a curved shark's mouth/teeth for the inside of the hood and a JDM sticker bomb wrap for the palm side pate. I'll probably do an old flat stamped Diawa handle too. Also going to try my hand any wrapping side mirrors in urban camo on my old slammed Forester.
Don't drink and browse Aliexpress
-
toddmc
- Pro Angler
- Posts: 2108
- Joined: Mon Sep 12, 2011 9:31 am
Post
by toddmc » Sun Jun 21, 2020 1:41 pm
Did I stumble onto a Nascar thread from bassboatcentral?
-
hoohoorjoo
- TT Moderator
- Posts: 6808
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Post
by hoohoorjoo » Sun Jun 21, 2020 2:33 pm
toddmc wrote: ↑Sun Jun 21, 2020 1:41 pm
Did I stumble onto a Nascar thread from bassboatcentral?
Rofl!
Try not to let your mind wander. It is much too small to be outside unsupervised.
-
Winstondry
- Elite Angler
- Posts: 692
- Joined: Fri Oct 06, 2006 7:38 pm
- Location: San Diego, CA
Post
by Winstondry » Sun Jun 21, 2020 4:53 pm
Are you doing the carbon thang to any of your Steez reels, Rick?
-
YakBassin
- Angler
- Posts: 11
- Joined: Thu Jul 12, 2018 5:05 pm
Post
by YakBassin » Mon Jun 22, 2020 6:27 am
Getting her ready for install...the BE!
- BE8E6216-600F-43C1-A0A9-955968A6197A.jpeg (92.54 KiB) Viewed 8758 times
-
MountainMan 83
- Elite Angler
- Posts: 650
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Post
by MountainMan 83 » Mon Jun 22, 2020 6:42 am
YakBassin wrote: ↑Mon Jun 22, 2020 6:27 am
Getting her ready for install...the BE!
BE8E6216-600F-43C1-A0A9-955968A6197A.jpeg
Nice! You throwing in a new gear set?
-
Cal
- Site Admin
- Posts: 12777
- Joined: Tue Oct 05, 2004 5:31 pm
- Location: TT Headquarters
-
Contact:
Post
by Cal » Mon Jun 22, 2020 6:55 am
MountainMan 83 wrote: ↑Mon Jun 22, 2020 6:42 am
YakBassin wrote: ↑Mon Jun 22, 2020 6:27 am
Getting her ready for install...the BE!
BE8E6216-600F-43C1-A0A9-955968A6197A.jpeg
Nice! You throwing in a new gear set?
I hope so because there's an easier way to get to the spool..
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
-
Aquaftm45
- Platinum Angler
- Posts: 1087
- Joined: Sun Dec 17, 2017 7:50 pm
Post
by Aquaftm45 » Mon Jun 22, 2020 3:07 pm
Winstondry wrote: ↑Sun Jun 21, 2020 4:53 pm
Are you doing the carbon thang to any of your Steez reels, Rick?
Come on now...I not the conductor of that train wreck, I was just train hopping. All my reels are still pristine
-
YakBassin
- Angler
- Posts: 11
- Joined: Thu Jul 12, 2018 5:05 pm
Post
by YakBassin » Mon Jun 22, 2020 4:47 pm
Cal wrote: ↑Mon Jun 22, 2020 6:55 am
MountainMan 83 wrote: ↑Mon Jun 22, 2020 6:42 am
YakBassin wrote: ↑Mon Jun 22, 2020 6:27 am
Getting her ready for install...the BE!
BE8E6216-600F-43C1-A0A9-955968A6197A.jpeg
Nice! You throwing in a new gear set?
I hope so because there's an easier way to get to the spool..
it was time for some new carbontex and grease
-
Winstondry
- Elite Angler
- Posts: 692
- Joined: Fri Oct 06, 2006 7:38 pm
- Location: San Diego, CA
Post
by Winstondry » Mon Jun 22, 2020 5:01 pm
Aquaftm45 wrote: ↑Mon Jun 22, 2020 3:07 pm
Winstondry wrote: ↑Sun Jun 21, 2020 4:53 pm
Are you doing the carbon thang to any of your Steez reels, Rick?
Come on now...I not the conductor of that train wreck, I was just train hopping. All my reels are still pristine
Ha! Forgot who I was asking...