T3 Project
-
- Elite Angler
- Posts: 264
- Joined: Sun Nov 11, 2012 5:40 am
- Location: Smith Mountain Lake
T3 Project
I purchased a T3 1016H from TW while they are on sale, with the sole intention of it being a project reel. So, here is what I want to know... If it were you, what mods would you do to it?
I am thinking:
Megabass IS Finesse Spool
Hedgehog BFS Air bearings
CF handle
Hedgehog Studios Dress up kit (color undecided, make some suggestions!)
Likely will get a set of Daiwa Original Corks, or compressed corks.
As I said, if it were you, what mods would you do?
Thanks in advance!
I am thinking:
Megabass IS Finesse Spool
Hedgehog BFS Air bearings
CF handle
Hedgehog Studios Dress up kit (color undecided, make some suggestions!)
Likely will get a set of Daiwa Original Corks, or compressed corks.
As I said, if it were you, what mods would you do?
Thanks in advance!
- africanbass
- TT Moderator
- Posts: 3632
- Joined: Thu Jan 17, 2008 5:03 am
- Location: johannesburg south africa
Re: T3 Project
Personally I think the reel is great straight out of the box
If i was to drop some cash on the reel,this is what I would do,
-SV spool
-Zaion dragstar
-Orange custom 'bits and pieces'
-2 additional knob bearings.
-Carbon handle/
-Cork knobs or the stunning new Avail clear (orange) knobs.
If i was to drop some cash on the reel,this is what I would do,
-SV spool
-Zaion dragstar
-Orange custom 'bits and pieces'
-2 additional knob bearings.
-Carbon handle/
-Cork knobs or the stunning new Avail clear (orange) knobs.
- daiwafan
- Elite Angler
- Posts: 543
- Joined: Mon Jun 26, 2006 3:39 pm
- Location: Bluefield West (by god) Virginia
Re: T3 Project
That is precisely what I did to the 7.1 I have. I went with red screws, knob caps and pawl cover, an IS spool and the handle off a PXR. The thing is a beast for casting baits up to 1/4 ounce or so. What continues to surprise me is how controllable it is. Very difficult to get it to try to backlash. I have been thinking about picking up another one myself.Dragboatdriver wrote:I purchased a T3 1016H from TW while they are on sale, with the sole intention of it being a project reel. So, here is what I want to know... If it were you, what mods would you do to it?
I am thinking:
Megabass IS Finesse Spool
Hedgehog BFS Air bearings
CF handle
Hedgehog Studios Dress up kit (color undecided, make some suggestions!)
Likely will get a set of Daiwa Original Corks, or compressed corks.
As I said, if it were you, what mods would you do?
Thanks in advance!
Re: T3 Project
new Avail clear (orange) knobs
Where can I find this?
Where can I find this?
- Hogsticker2
- Pro Angler
- Posts: 7180
- Joined: Wed Feb 29, 2012 5:20 pm
Re: T3 Project
T3 SV 1000 spool
Blue RCS handle knobs
Hedgehog Air bearings
Hedgehog carbon swept handle
Hedgehog deep purple dress up parts
This is how I did my MX. Maybe different colors for the silver reel
Blue RCS handle knobs
Hedgehog Air bearings
Hedgehog carbon swept handle
Hedgehog deep purple dress up parts
This is how I did my MX. Maybe different colors for the silver reel
- Mcyl
- Pro Angler
- Posts: 1980
- Joined: Wed Jan 25, 2012 7:49 am
- Location: Townsville, QLD. Australia
- Contact:
Re: T3 Project
Would a ZPI TDZ spool work?
- africanbass
- TT Moderator
- Posts: 3632
- Joined: Thu Jan 17, 2008 5:03 am
- Location: johannesburg south africa
-
- Elite Angler
- Posts: 264
- Joined: Sun Nov 11, 2012 5:40 am
- Location: Smith Mountain Lake
Re: T3 Project
The T3 arrived today. So far I have an ITO Engineering Cf handle on it, ZPI Machine Cut Aluminum red knobs, and the Megabass IS Finesse spool in it. I removed the brass shim from beneath the black shim under the palm plate bearing. I don't like how it makes the spool sit offset slightly toward the palmplate and renders the spool tension knob useless. However, it will work for what I'm doing, so I can deal with it. I suppose next step would be the Hedgehog dress up kit. At this point, I am leaning toward red.
Any input is appreciated!
Any input is appreciated!
- Afrayedknot
- Pro Angler
- Posts: 1913
- Joined: Thu Jun 27, 2013 4:32 am
Re: T3 Project
I think the gold dress up kit would look pretty cool on the t3.. Might just be me though.
- daiwafan
- Elite Angler
- Posts: 543
- Joined: Mon Jun 26, 2006 3:39 pm
- Location: Bluefield West (by god) Virginia
Re: T3 Project
I don't know why the conversion made your brake useless, mine functions normally
Re: T3 Project
Oh yeah I'll be following this thread closely. With the savings on closeout prices I should be able to have some fun with this reel. I'm thinking of getting it painted. Something similar to the FX68 but not quite.
-
- Elite Angler
- Posts: 264
- Joined: Sun Nov 11, 2012 5:40 am
- Location: Smith Mountain Lake
Re: T3 Project
daiwafan wrote:I don't know why the conversion made your brake useless, mine functions normally
It didn't affect the braking at all, however the spool tension knob is non-functional now. I have done this mod before and this did not occur. I don't use spool tension on any of my reels, so it doesn't bother me. I am still interested as to what is causing it though.
Re: T3 Project
OP: You can check out the FX Air thread that was posted in the Show and Tell section. Not sure if the bearing sizes are similar in the T3 and FX68 reels. PM the OP in the other thread for suggestions.
Show pics of your reel when you get a chance.
Show pics of your reel when you get a chance.
-
- Platinum Angler
- Posts: 1471
- Joined: Sat Aug 13, 2011 5:16 pm
- Location: Chicago
Re: T3 Project
Dragboatdriver wrote:The T3 arrived today. So far I have an ITO Engineering Cf handle on it, ZPI Machine Cut Aluminum red knobs, and the Megabass IS Finesse spool in it. I removed the brass shim from beneath the black shim under the palm plate bearing. I don't like how it makes the spool sit offset slightly toward the palmplate and renders the spool tension knob useless. However, it will work for what I'm doing, so I can deal with it. I suppose next step would be the Hedgehog dress up kit. At this point, I am leaning toward red.
Any input is appreciated!
Did you try the spool with the shim installed? Sound's like your new one might have a little more room. Otherwise, a narrower spool bearing should get you there.
-
- Elite Angler
- Posts: 264
- Joined: Sun Nov 11, 2012 5:40 am
- Location: Smith Mountain Lake
Re: T3 Project
Here she is so far. Megabass IS Finesse spool, ITO engineering handle, ZPI knobs. Still waiting for the Hedgehog air bfs bearings and Hedgehog red dress up kit. She is sitting on a Megabass X7 Shading X.
- Attachments
-
- 100_9446.JPG (59.01 KiB) Viewed 4808 times
-
- 100_9445.JPG (50.02 KiB) Viewed 4808 times
-
- 100_9444.JPG (60.48 KiB) Viewed 4808 times