Modern Megabass rods and misinterpretations of construction

This is the place to talk shop about all the enthusiast and import tackle for the truly afflicted
Post Reply
User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4784
Joined: Wed Jun 15, 2016 9:18 am

Modern Megabass rods and misinterpretations of construction

Post by LowRange » Sun Nov 28, 2021 12:05 pm

What I am getting at is what I believe to be purely cosmetic treatments being mistaken for the blank material. I will use Kabt found in the Orochi XXX in this example. I believe what we claim to be the Kabt weave on the rods in actually a cosmetic treatment only and the Kabt fibers are not visible and actually span the entire length of the rod rather than just from the butt to the stripper guide. This is fine. I actually love the appearance of this treatment and is one of my favorite things about the rod. It has a snake skin like appearance that fits well with the Orochi namesake.

I believe this is a cosmetic treatment only for these 4 reasons:

1) It doesn't make sense to only have this material run such a short length of the rod

2) graphics illustrating the construction clearly show the Kabt as a material on the inner layers meaning that the weave itself should never be visible on the outside of the rod

3) there is a pretty obvious seam or break in the diamond pattern that runs the length of the material. This clearly indicates that the pattern was woven as a sheet off the rod then adhered to the black as opposed to being woven onto the blank without lengthwise seams of pattern breaks present.

4) what looks like the exact same fabric is found on a Daiwa budget stick on Aliexpress.

Image
Image
Image

I'm sure there are a number of rods that have the same sort of cosmetic treatment we have been mistaking for the blank material. I would say that the Shieldz on my Valkaryie runs the whole length of the rod and is not intact the red woven treatment found on the back portion of the rod. It might not even be a newer MB thing and there may be instances of what we thought were titanium fiber actually being a cosmetic treatment.
Last edited by LowRange on Sun Nov 28, 2021 12:12 pm, edited 2 times in total.

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4784
Joined: Wed Jun 15, 2016 9:18 am

Re: Modern Megabass rods and misinterpretations of construction

Post by LowRange » Sun Nov 28, 2021 12:09 pm

Pic links are dead. Try these attachments.
Attachments
orochixxx_spp_2_en_copy_500x322.jpg
orochixxx_spp_2_en_copy_500x322.jpg (43.84 KiB) Viewed 2544 times
Screenshot_20211128-134312_Gallery_copy_540x972.jpg
Screenshot_20211128-134312_Gallery_copy_540x972.jpg (52.8 KiB) Viewed 2544 times
Screenshot_20211128-140803_Gallery.jpg
Screenshot_20211128-140803_Gallery.jpg (24.78 KiB) Viewed 2544 times

Finesse Angler
Senior Angler
Senior Angler
Posts: 109
Joined: Wed Mar 08, 2017 11:07 am

Re: Modern Megabass rods and misinterpretations of construction

Post by Finesse Angler » Sun Nov 28, 2021 7:03 pm

It’s probably same as major craft and the ms-d and there x wrap technology. I don’t if there’s goes all the way to the tip or not but the visible portion only goes to the first guide.

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4784
Joined: Wed Jun 15, 2016 9:18 am

Re: Modern Megabass rods and misinterpretations of construction

Post by LowRange » Sun Nov 28, 2021 7:19 pm

Finesse Angler wrote:
Sun Nov 28, 2021 7:03 pm
It’s probably same as major craft and the ms-d and there x wrap technology. I don’t if there’s goes all the way to the tip or not but the visible portion only goes to the first guide.
Unlike the X wraps that are wrapped onto the blank and no seam or pattern break is made lengthwise there is one on the Orochi xxx and new xx rods leading me to believe that this treatment might be more cosmetic than structural.

Finesse Angler
Senior Angler
Senior Angler
Posts: 109
Joined: Wed Mar 08, 2017 11:07 am

Re: Modern Megabass rods and misinterpretations of construction

Post by Finesse Angler » Mon Nov 29, 2021 12:42 am

I’m sure the exterior is. I feel that it’s similar technology and for some companies they make it a bumpy exterior design and others like megabass bury it into the layers to be smooth. I wouldn’t be surprised if they did the cosmetic to match other companies for a cool look. However the actual technology still probably exist out of site.

dennis_rf
Elite Angler
Elite Angler
Posts: 268
Joined: Tue Mar 08, 2016 11:57 pm
Location: Germany

Re: Modern Megabass rods and misinterpretations of construction

Post by dennis_rf » Mon Nov 29, 2021 1:38 am

Evergreens 4 Axis cloth also has a seam but I’ve heard people say it actually does sth… (Marketing obviously does think it’s legit) but probably not more than slightly stiffening the butt I guess?

BUT: What’s wrong about seams anyways, blanks used to be a sheet with sides as well and rolled up they do work, stiff to limber. They’re not as magical as tshirts made from ring spun cotton tho :D

SSS
Platinum Angler
Platinum Angler
Posts: 1379
Joined: Thu Jul 13, 2017 5:38 pm

Re: Modern Megabass rods and misinterpretations of construction

Post by SSS » Mon Nov 29, 2021 6:59 am

On the OG xfti rods, the titanium wires were going from butt to tip. I have seen one cut in half, and you can very clearly see the wiring inside the blank. But those were the days when all their rods were made in Japan and felt like custom rods. Its not like that anymore.

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4784
Joined: Wed Jun 15, 2016 9:18 am

Re: Modern Megabass rods and misinterpretations of construction

Post by LowRange » Mon Nov 29, 2021 7:20 am

SSS wrote:
Mon Nov 29, 2021 6:59 am
On the OG xfti rods, the titanium wires were going from butt to tip. I have seen one cut in half, and you can very clearly see the wiring inside the blank. But those were the days when all their rods were made in Japan and felt like custom rods. Its not like that anymore.
I've noticed that. It's why I picked up my P2 Destroyer recently. I like the modern MB sticks and even my $199 Levante is breathtaking to gaze upon but the old sticks just have a certain appeal I can't explain. Maybe it's the beauty in the design where the actual construction is beautiful rather than the rod jewelry added to it that draws me to the old sticks. I love some rod jewelry but that braided graphite in my F7 711X is gorgeous to look at in person. That said my 711X has fake wood airbrushed onto the reel seat. Just going to chalk that one up to the guy wearing sunglasses indoors.

Also on the xfti rod you saw cut in half, were the ti fibers on the inside of the rod or on the outside? Wondering if the pin stripes on the blank were a cosmetic treatment to hint at the fibers within or if they were the actual fibers.

SSS
Platinum Angler
Platinum Angler
Posts: 1379
Joined: Thu Jul 13, 2017 5:38 pm

Re: Modern Megabass rods and misinterpretations of construction

Post by SSS » Mon Nov 29, 2021 9:56 am

LowRange wrote:
Mon Nov 29, 2021 7:20 am
SSS wrote:
Mon Nov 29, 2021 6:59 am
On the OG xfti rods, the titanium wires were going from butt to tip. I have seen one cut in half, and you can very clearly see the wiring inside the blank. But those were the days when all their rods were made in Japan and felt like custom rods. Its not like that anymore.
I've noticed that. It's why I picked up my P2 Destroyer recently. I like the modern MB sticks and even my $199 Levante is breathtaking to gaze upon but the old sticks just have a certain appeal I can't explain. Maybe it's the beauty in the design where the actual construction is beautiful rather than the rod jewelry added to it that draws me to the old sticks. I love some rod jewelry but that braided graphite in my F7 711X is gorgeous to look at in person. That said my 711X has fake wood airbrushed onto the reel seat. Just going to chalk that one up to the guy wearing sunglasses indoors.

Also on the xfti rod you saw cut in half, were the ti fibers on the inside of the rod or on the outside? Wondering if the pin stripes on the blank were a cosmetic treatment to hint at the fibers within or if they were the actual fibers.
It looks like half of the wire is fitted inside of the blank when it was rolled. Since you can visually see the wire even without the blank being cut in half, the wires are not deeply inserted in the walls of the blank.
Last edited by SSS on Tue Nov 30, 2021 10:53 am, edited 1 time in total.

Cristo
Pro Angler
Pro Angler
Posts: 1919
Joined: Thu Dec 08, 2016 6:13 am

Re: Modern Megabass rods and misinterpretations of construction

Post by Cristo » Mon Nov 29, 2021 4:42 pm

Dang Low, I thought I had some time on my hands :P

User avatar
LowRange
Pro Angler
Pro Angler
Posts: 4784
Joined: Wed Jun 15, 2016 9:18 am

Re: Modern Megabass rods and misinterpretations of construction

Post by LowRange » Mon Nov 29, 2021 6:27 pm

Cristo wrote:
Mon Nov 29, 2021 4:42 pm
Dang Low, I thought I had some time on my hands :P
Winter started. Its going to be a long winter.

Cristo
Pro Angler
Pro Angler
Posts: 1919
Joined: Thu Dec 08, 2016 6:13 am

Re: Modern Megabass rods and misinterpretations of construction

Post by Cristo » Mon Nov 29, 2021 6:38 pm

Image

Post Reply