Bearing Needed

Here's your chance to speak directly with the TT Gear Crew. Post your questions, comments, experiences regarding tackle maintenance and super tuning
Post Reply
MountainMan 83
Elite Angler
Elite Angler
Posts: 628
Joined: Mon Feb 26, 2018 9:18 am
Location: Jessup, MD

Bearing Needed

Post by MountainMan 83 » Tue Jun 28, 2022 9:12 am

Anyone know where I can find a good quality 3mm x 10mm x 3mm bearing? Normal size is 3x10x4.

I'm dropping a 1516 HLC spool into a Z200 and the spool shaft is a bit longer. I've tried an ebay seller but the ones I've received are pretty bad. Thanks!

kevinkunkle
Angler
Angler
Posts: 11
Joined: Thu Dec 17, 2020 10:22 am

Re: Bearing Needed

Post by kevinkunkle » Tue Jun 28, 2022 9:17 am

amain hobbies or avidrc.

MountainMan 83
Elite Angler
Elite Angler
Posts: 628
Joined: Mon Feb 26, 2018 9:18 am
Location: Jessup, MD

Re: Bearing Needed

Post by MountainMan 83 » Tue Jun 28, 2022 9:20 am

kevinkunkle wrote:
Tue Jun 28, 2022 9:17 am
amain hobbies or avidrc.
Thanks I'll check them out!

Edit: They don't have that size.

mark poulson
TT Pro Angler
TT Pro Angler
Posts: 2745
Joined: Thu Dec 20, 2007 6:28 am
Location: NorCal

Re: Bearing Needed

Post by mark poulson » Wed Jun 29, 2022 6:02 pm

MountainMan 83 wrote:
Tue Jun 28, 2022 9:20 am
kevinkunkle wrote:
Tue Jun 28, 2022 9:17 am
amain hobbies or avidrc.
Thanks I'll check them out!

Edit: They don't have that size.
If they're still around, try Boca Bearings.

MountainMan 83
Elite Angler
Elite Angler
Posts: 628
Joined: Mon Feb 26, 2018 9:18 am
Location: Jessup, MD

Re: Bearing Needed

Post by MountainMan 83 » Thu Jun 30, 2022 8:31 am

mark poulson wrote:
Wed Jun 29, 2022 6:02 pm
MountainMan 83 wrote:
Tue Jun 28, 2022 9:20 am
kevinkunkle wrote:
Tue Jun 28, 2022 9:17 am
amain hobbies or avidrc.
Thanks I'll check them out!

Edit: They don't have that size.
If they're still around, try Boca Bearings.
Thanks, I'll look into them.

I got the stock bearing turned down on the lathe but it doesn't spin very freely. Hopefully a bath in the ultrasonic will get it cleaned out.

Post Reply