Anyone know where I can find a good quality 3mm x 10mm x 3mm bearing? Normal size is 3x10x4.
I'm dropping a 1516 HLC spool into a Z200 and the spool shaft is a bit longer. I've tried an ebay seller but the ones I've received are pretty bad. Thanks!
Bearing Needed
-
- Elite Angler
- Posts: 643
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
-
- Angler
- Posts: 11
- Joined: Thu Dec 17, 2020 10:22 am
Re: Bearing Needed
amain hobbies or avidrc.
-
- Elite Angler
- Posts: 643
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: Bearing Needed
Thanks I'll check them out!
Edit: They don't have that size.
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Bearing Needed
If they're still around, try Boca Bearings.MountainMan 83 wrote: ↑Tue Jun 28, 2022 9:20 amThanks I'll check them out!
Edit: They don't have that size.
-
- Elite Angler
- Posts: 643
- Joined: Mon Feb 26, 2018 9:18 am
- Location: Jessup, MD
Re: Bearing Needed
Thanks, I'll look into them.mark poulson wrote: ↑Wed Jun 29, 2022 6:02 pmIf they're still around, try Boca Bearings.MountainMan 83 wrote: ↑Tue Jun 28, 2022 9:20 amThanks I'll check them out!
Edit: They don't have that size.
I got the stock bearing turned down on the lathe but it doesn't spin very freely. Hopefully a bath in the ultrasonic will get it cleaned out.