Steez A HLC Spool mod
Steez A HLC Spool mod
I assume that you are quite disappointed with the casting performance on short and medium distances.
Steez HLC and Zillion HD have the same shaft dimensions, the difference is in the thickness of the inductor and the hardness of the springs.
After switching the spring and inductor from the Zillion to the Steez, I got a 36mm spool that is controlled at short and long distances , and the 36mm spool handles better with 20lb Fluoro.
Steez HLC and Zillion HD have the same shaft dimensions, the difference is in the thickness of the inductor and the hardness of the springs.
After switching the spring and inductor from the Zillion to the Steez, I got a 36mm spool that is controlled at short and long distances , and the 36mm spool handles better with 20lb Fluoro.
Re: Steez A HLC Spool mod
OK, so New 2-spring HLC spring (and inductor) parts are perfectly interchangeable to older Z -brakes?
EDIT: replied that it's not...
EDIT: replied that it's not...
Last edited by jvelth74 on Mon Jul 25, 2022 8:38 am, edited 1 time in total.
- BARRAMANIAC
- Platinum Angler
- Posts: 1213
- Joined: Thu Apr 20, 2006 10:00 pm
- Location: Townsville , Queensland , Australia
Re: Steez A HLC Spool mod
he has swapped between 2 boost spools not older z spool. assuming the z boost spools have done the same as the SV spools. in the sv boost spools the hub of the spool is offset more towards the gearbox side of reel to give a longer shaft to accommodate the 2 springs. i tried putting sv boost components onto a 1012 G1 SV spool and there isn't enough room for the boost system to work as it basically makes it nearly a fixed inductor.
Re: Steez A HLC Spool mod
Correct, this swap works only between these 2 spools.BARRAMANIAC wrote: ↑Sat Jul 23, 2022 1:45 pmhe has swapped between 2 boost spools not older z spool. assuming the z boost spools have done the same as the SV spools. in the sv boost spools the hub of the spool is offset more towards the gearbox side of reel to give a longer shaft to accommodate the 2 springs. i tried putting sv boost components onto a 1012 G1 SV spool and there isn't enough room for the boost system to work as it basically makes it nearly a fixed inductor.
Re: Steez A HLC Spool mod
OK ... Thanks for info!
Re: Steez A HLC Spool mod
Nice mod. HLC and flouro don't play nice. You need hyper long casting baits and hyper long casting line to play nice with your hyper long cast spool. Anything above 10# non braid is suffering on the original spool.
Also the Zillion HD spool sounds really controlled from all the accounts I have heard so this is a way to make a 36mm HD spool and a 34mm HLC.
Also the Zillion HD spool sounds really controlled from all the accounts I have heard so this is a way to make a 36mm HD spool and a 34mm HLC.
Last edited by LowRange on Wed Jul 27, 2022 4:18 am, edited 1 time in total.
Re: Steez A HLC Spool mod
I bought HLC because I expected better performance with 18 and 20lb FC thanks to 36mm spool. And when I bought HD I feel that zillion handles FC much better then HLC.
Now steez perform better then HLC and HD
Now steez perform better then HLC and HD
Re: Steez A HLC Spool mod
Then never gets mentioned but HLC spools are "fast" spools and fast spools don't do well with big diameter, clumsy stiff line like heaver monos and flouro lines. You really want to match your braking profile to your baits and line. All my centrifugals and my fast spool Daiwas are braid use only.