Stella FK Knob Replacement
Stella FK Knob Replacement
There's a black sleeve that goes over the knob post on my Stella FK - if I'm putting an aftermarket knob on (Avail EVA slim), do I install that sleeve with the new knob?
I tried leaving the sleeve on but couldn't get the knob to spin freely. This is with zero additional washers just the 2 bearings.
If I take off the sleeve it spins freely but there's an awful lot of play.
I tried leaving the sleeve on but couldn't get the knob to spin freely. This is with zero additional washers just the 2 bearings.
If I take off the sleeve it spins freely but there's an awful lot of play.
Re: Stella FK Knob Replacement
I am not familiar with the aftermarket knob. I suggest contacting the company or seller to see if they have any instructions for you.
Re: Stella FK Knob Replacement
Get yourself more shims to get rid of the play.
I usually dont have to use the plastic sleeve.
I usually dont have to use the plastic sleeve.
Re: Stella FK Knob Replacement
Sometimes you have to sand the shims a little to get the perfect fit. A little 400 grit and place the shim on your finger and start rubbing.
Re: Stella FK Knob Replacement
Did you figure this out? I have different thickness shims and I can help you out. Do yourself a favor and get a caliper. I bought a very nice Mitutoyo caliper last year and I don't know how the hell I ever got by without one until now. I used mine the other day for exactly what you are talking about. I was putting a set of knobs on a handle and one shim was too thick and then it wouldn't turn and it was exactly twice as thick as another shim that I ended up using and everything was perfect. If you need some shims, let me know because I have multiple sizes and I would be more than happy to send them to you at no charge.