VMC Hook Eye Epoxy?
Posted: Mon Nov 30, 2020 9:44 am
Does anyone have a good idea as to what VMC uses for their hook eye epoxy? I'd like to get my hands on some.
Hopefully someone knows, I would love to add to my Gammy's
TackleTour
VMC Hook Eye Epoxy?
Page 1 of 1
Re: VMC Hook Eye Epoxy?
Posted: Mon Nov 30, 2020 10:43 am
Re: VMC Hook Eye Epoxy?
Posted: Sun Dec 06, 2020 8:41 am
Pardon my ignorance, but what is it good for?
Thanks in advance!
Thanks in advance!
Re: VMC Hook Eye Epoxy?
Posted: Sun Dec 06, 2020 9:47 am
I keeps the line from getting caught in the gap at the hook eye. Your line will often break when your knot rolls to the bottom of the hook eye and rubs against the end of the wire in the hook eye loop.
Re: VMC Hook Eye Epoxy?
Posted: Sun Dec 06, 2020 10:37 am
I’ve always used some of the 5 minute Loctite epoxy. Holds great and no more broken knots.
Re: VMC Hook Eye Epoxy?
Posted: Sun Dec 06, 2020 4:49 pm
This works fine, Jeff. I've also used gel super glue, then sprinkle a little baking soda. It will harden as smooth and as hard as glass almost instantly. It can even be filed and ground down after hardening. A buddy uses this combination to repair chips and cracks in the carbon fiber blades of his drones. I've also used it to repair a cracked carbon fiber handle.JBcrankaddict wrote: ↑Sun Dec 06, 2020 10:37 amI’ve always used some of the 5 minute Loctite epoxy. Holds great and no more broken knots.
Re: VMC Hook Eye Epoxy?
Posted: Mon Dec 07, 2020 2:53 am
Thanks guys! Info like this is why I joined TT. 
Re: VMC Hook Eye Epoxy?
Posted: Mon Dec 07, 2020 3:39 am
I use a Loon product gel that you cure with a UV light. It's not sticky, it's pretty hard but remains a bit flexible. I use the fluid kind not the tick kind. I also use it for the gap in spinnerbait wire. I don't loose so many blades.
Re: VMC Hook Eye Epoxy?
Posted: Mon Dec 07, 2020 8:46 am
That’s a great mix, sounds like it can be used for all kinds of stuff. I use it to repair old lures before paint and cracked/chipped lips on hardbaits.hoohoorjoo wrote: ↑Sun Dec 06, 2020 4:49 pmThis works fine, Jeff. I've also used gel super glue, then sprinkle a little baking soda. It will harden as smooth and as hard as glass almost instantly. It can even be filed and ground down after hardening. A buddy uses this combination to repair chips and cracks in the carbon fiber blades of his drones. I've also used it to repair a cracked carbon fiber handle.JBcrankaddict wrote: ↑Sun Dec 06, 2020 10:37 amI’ve always used some of the 5 minute Loctite epoxy. Holds great and no more broken knots.
Re: VMC Hook Eye Epoxy?
Posted: Mon Dec 07, 2020 10:36 am
This sounds good, I'm looking for a smoother finish. My super glue and 5 minute epoxy runs aren't usually too smooth. I wonder if VMC spins the hook on a machine, like a rod that has just been built.hoohoorjoo wrote: ↑Sun Dec 06, 2020 4:49 pmThis works fine, Jeff. I've also used gel super glue, then sprinkle a little baking soda. It will harden as smooth and as hard as glass almost instantly. It can even be filed and ground down after hardening. A buddy uses this combination to repair chips and cracks in the carbon fiber blades of his drones. I've also used it to repair a cracked carbon fiber handle.JBcrankaddict wrote: ↑Sun Dec 06, 2020 10:37 amI’ve always used some of the 5 minute Loctite epoxy. Holds great and no more broken knots.
Re: VMC Hook Eye Epoxy?
Posted: Fri Dec 25, 2020 2:12 pm
call me stupid
but I just use the VMC hooks. that they won't let my braid loose is why. started about 3-4 years ago. I use the heavy duty for about everything plastic
I think I have landed 3 of 4 double digit bass on these babies so can't find a reason to go another direction
but I just use the VMC hooks. that they won't let my braid loose is why. started about 3-4 years ago. I use the heavy duty for about everything plastic
I think I have landed 3 of 4 double digit bass on these babies so can't find a reason to go another direction
Re: VMC Hook Eye Epoxy?
Posted: Sat Dec 26, 2020 11:05 am
I just have too many Gammy's to not look for a more economical solution that replacingDavidSA wrote: ↑Fri Dec 25, 2020 2:12 pmcall me stupid
but I just use the VMC hooks. that they won't let my braid loose is why. started about 3-4 years ago. I use the heavy duty for about everything plastic
I think I have landed 3 of 4 double digit bass on these babies so can't find a reason to go another direction
](./images/smilies/eusa_wall.gif "Brick wall"){kind=small}
Re: VMC Hook Eye Epoxy?
Posted: Sat Dec 26, 2020 12:28 pm
got it,
been a while since I've been in that postion but I recall finding a knot that was bigger and helped prevent my braid from slipping out. Never had this issue with the Gammy's I don't think until I became straight braid guy
been a while since I've been in that postion but I recall finding a knot that was bigger and helped prevent my braid from slipping out. Never had this issue with the Gammy's I don't think until I became straight braid guy
Re: VMC Hook Eye Epoxy?
Posted: Sat Dec 26, 2020 1:45 pm
I just don’t like VMC hooks. Just not sharp enough for my liking. Owner and Gamakatsu for me, love their variety, and I can get VMC very cheap. Adding a little epoxy to the hook eyes takes about 1 minute to do a whole pack of hooks, so it’s worth it. Never broke braid on hooksets, but noticed fluoro breaking easily and haven’t had issues since adding the epoxy.