Trika Rods

A specialized forum to discuss anything and everything about your favorite or not so favorite fishing rods.
Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Wed Nov 02, 2022 8:27 pm

So, I actually got one and it feels good in the hand. I will fish it comprehensively before I post any impressions on the rod's actual performance. (My comments have skewed negatively so far and I'm trying to not come off as a naysayer who's already made up his mind.)

That said (and hoping that it doesn't immediately disqualify everything I just said), I'm surprised by how cheap the reel seat looks for a $300+ rod. Definitely plastic, feels unpolished/dull and like it has swirls in it. Tons of seams even on the visible parts. I felt like I could post that part right away.
trikaReelSeat1.jpg
trikaReelSeat1.jpg (89.92 KiB) Viewed 3143 times
trikaReelSeat2.jpg
trikaReelSeat2.jpg (80.92 KiB) Viewed 3143 times
trikaReelSeat3.jpg
trikaReelSeat3.jpg (109.19 KiB) Viewed 3143 times
trikaReelSeat4.jpg
trikaReelSeat4.jpg (109.26 KiB) Viewed 3143 times
Last edited by Drakestar on Wed Nov 02, 2022 10:47 pm, edited 2 times in total.

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Wed Nov 02, 2022 8:46 pm

Chode wrote:
Sat Oct 01, 2022 6:07 pm
Anyone know the balancing point?

Also, they're using kigan guides with zirc inserts--are they the same guides that gave dobyns problems over the years?
Probably different for every rod, but the 7'0" Medium spinning rod feels pretty well balanced. (With a Exists 2000 at 5.3oz.)
trikaBalance.jpg
trikaBalance.jpg (100.73 KiB) Viewed 3142 times

Chode
Pro Angler
Pro Angler
Posts: 1831
Joined: Sat Feb 26, 2011 7:42 pm

Re: Trika Rods

Post by Chode » Thu Nov 03, 2022 12:43 pm

Drakestar wrote:
Wed Nov 02, 2022 8:46 pm
Chode wrote:
Sat Oct 01, 2022 6:07 pm
Anyone know the balancing point?

Also, they're using kigan guides with zirc inserts--are they the same guides that gave dobyns problems over the years?
Probably different for every rod, but the 7'0" Medium spinning rod feels pretty well balanced. (With a Exists 2000 at 5.3oz.)

trikaBalance.jpg
looks like u finally caved and got one lol. now, is it 2x more sensitive than a conquest?

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Thu Nov 03, 2022 1:10 pm

Chode wrote:
Thu Nov 03, 2022 12:43 pm
Drakestar wrote:
Wed Nov 02, 2022 8:46 pm
Chode wrote:
Sat Oct 01, 2022 6:07 pm
Anyone know the balancing point?

Also, they're using kigan guides with zirc inserts--are they the same guides that gave dobyns problems over the years?
Probably different for every rod, but the 7'0" Medium spinning rod feels pretty well balanced. (With a Exists 2000 at 5.3oz.)

trikaBalance.jpg
looks like u finally caved and got one lol. now, is it 2x more sensitive than a conquest?
I haven't fished it yet, the whole week has been rising barometric pressure around here. Supposed to turn to pre-frontal conditions on the weekend, I'll give it a fair shake then. I don't need 2x sensitivity TBH, "as good as an NRX" would already mean something. I dragged a Ned over the lawn with braid-to-leader and it felt sensitive, but not eye-openingly so.

It's a 7'0" M so I'll be able to compare it to a 6'10" Poison Adrena Medium and Poison Ultima Medium, for example. (And I figure I'll put it up against a NRX 852 and maybe the Steez Unicorn rod, as well.)

Chode
Pro Angler
Pro Angler
Posts: 1831
Joined: Sat Feb 26, 2011 7:42 pm

Re: Trika Rods

Post by Chode » Thu Nov 03, 2022 2:29 pm

Drakestar wrote:
Thu Nov 03, 2022 1:10 pm
Chode wrote:
Thu Nov 03, 2022 12:43 pm
Drakestar wrote:
Wed Nov 02, 2022 8:46 pm
Chode wrote:
Sat Oct 01, 2022 6:07 pm
Anyone know the balancing point?

Also, they're using kigan guides with zirc inserts--are they the same guides that gave dobyns problems over the years?
Probably different for every rod, but the 7'0" Medium spinning rod feels pretty well balanced. (With a Exists 2000 at 5.3oz.)

trikaBalance.jpg
looks like u finally caved and got one lol. now, is it 2x more sensitive than a conquest?
I haven't fished it yet, the whole week has been rising barometric pressure around here. Supposed to turn to pre-frontal conditions on the weekend, I'll give it a fair shake then. I don't need 2x sensitivity TBH, "as good as an NRX" would already mean something. I dragged a Ned over the lawn with braid-to-leader and it felt sensitive, but not eye-openingly so.

It's a 7'0" M so I'll be able to compare it to a 6'10" Poison Adrena Medium and Poison Ultima Medium, for example. (And I figure I'll put it up against a NRX 852 and maybe the Steez Unicorn rod, as well.)
u have a lot of high-end rods to put it up against so ur analysis should be pretty interesting

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Sun Nov 13, 2022 8:58 pm

I’ve used the 7’0” spinner on 3 1/2 trips now and compared it to a couple other high-end rods: Poison Ultima 6’10” Medium (1/4-3/4oz, 8-16lbs line), NRX+ 852C (1/8-3/oz, 10-14lbs) and NRX 822 DSR (3/16-1/2oz, 6-12lbs). I mention the actual ratings because, even though all rods here are rated Medium (technically the DSR is a “Mag Medium”), there are big differences in what those M rods are supposedly capable of, and how heavy they actually are. (The Trika 7’0” M is rated 1/8-1/2, 6-12lbs btw.)

I did a bunch direct A/B testing (using braid-to-leader on all rods) in the same spots, throwing the same baits every time, i.e. these finesse jigs:
3FB57062-AC91-4D68-A6FA-840DA5F05443.jpeg
3FB57062-AC91-4D68-A6FA-840DA5F05443.jpeg (148.92 KiB) Viewed 3008 times
I made sure to catch fish on each rod, as well.

So, is that Trika 2x as sensitive as other high-end rods? Of course not ;) It’s not eye-openingly light, either. But it’s definitely holding its own, even against the comparison rods.

Long story short, I like the PU better for jigs and reading bottom, but the Trika transmits more vibration on a blade bait than the PU, possibly because of the carbon weave handle. I like the 822 DSR better for dropshots, as well. But I preferred the Trika over the 852 on finesse jigs and on Ned rigs (was catching them in 20 feet of water on a 1/4oz tungsten head), and the Trika wasn’t a lot worse than the other two high-end rods; I just preferred the PU and DSR. The Trika has impressive sensitivity in my book.

Would I buy another Trika rod? If it had a better reel seat, possibly (would probably get a 6’10” ML or 7’0” ML). It’s not that the seat is uncomfortable (even when touching the IMO oversized Trika logo), but man, it just looks so cheaply made. (See images earlier in the thread.) I’m running an Exists 2000 on this rod and placing that reel’s feet on those plastic seams feels like an insult :lol: I’m also not a big fan of the hook keeper, particularly because the full handle makes it impossible to install another one lower. The taper and power are fine. I don’t find the taper particularly funky, either, feels a bit like Shimano. The finish is barebones but fine. Some of the epoxy work feels sloppy and not up to JDM standards, and the winding check for the handle is some rubber or plastic (it was loose when I got the rod and I had to push it in). But I’ve seen worse on more expensive rods like Kistler.

I have some more rods to test against (well, I don’t have too, but it’s kinda fun). Next up will be the Steez Universal Light (6’9” M, 1/8-5/8oz, 4-12lbs line), and possibly the Poison Adrena 6’10” M (same specs as the PU) and Steez 761MML (1/16-3/4oz, 5-12lbs).
Last edited by Drakestar on Tue Nov 29, 2022 10:48 am, edited 1 time in total.

Chode
Pro Angler
Pro Angler
Posts: 1831
Joined: Sat Feb 26, 2011 7:42 pm

Re: Trika Rods

Post by Chode » Tue Nov 15, 2022 5:30 pm

Drakestar wrote:
Sun Nov 13, 2022 8:58 pm
I’ve used the 7’0” spinner on 3 1/2 trips now and compared it to a couple other high-end rods: Poison Ultima 6’10” Medium (1/4-3/4oz, 8-16lbs line), NRX+ 852C (1/8-3/oz, 10-14lbs) and NRX 822 DSR (3/16-1/2oz, 6-12lbs). I mention the actual ratings because, even though all rods here are rated Medium (technically the DSR is a “Mag Medium”), there are big differences in what those M rods are supposedly capable of, and how heavy they actually are. (The Trika 7’0” M is rated 1/8-1/2, 6-12lbs btw.)

I did a bunch direct A/B testing (using braid-to-leader on all rods) in the same spots, throwing the same baits every time, i.e. these finesse jigs:

3FB57062-AC91-4D68-A6FA-840DA5F05443.jpeg

I made sure to catch fish on each rod, as well.

So, is that Trika 2x as sensitive as other high-end rods? Of course not ;) It’s not eye-openingly light, either. But it’s definitely holding its own, even against the comparison rods.

Long story short, I like the PU better for jigs and reading bottom, but the Triza transmits more vibration on a blade bait than the PU, possibly because of the carbon weave handle. I like the 822 DSR better for dropshots, as well. But I preferred the Triza over the 852 on finesse jigs and on Ned rigs (was catching them in 20 feet of water on a 1/4oz tungsten head), and the Triza wasn’t a lot worse than the other two high-end rods; I just preferred the PU and DSR. The Trika has impressive sensitivity in my book.

Would I buy another Triza rod? If it had a better reel seat, possibly (would probably get a 6’10” ML or 7’0” ML). It’s not that the seat is uncomfortable (even when touching the IMO oversized Trika logo), but man, it just looks so cheaply made. (See images earlier in the thread.) I’m running an Exists 2000 on this rod and placing that reel’s feet on those plastic seams feels like an insult :lol: I’m also not a big fan of the hook keeper, particularly because the full handle makes it impossible to install another one lower. The taper and power are fine. I don’t find the taper particularly funky, either, feels a bit like Shimano. The finish is barebones but fine. Some of the epoxy work feels sloppy and not up to JDM standards, and the winding check for the handle is some rubber or plastic (it was loose when I got the rod and I had to push it in). But I’ve seen worse on more expensive rods like Kistler.

I have some more rods to test against (well, I don’t have too, but it’s kinda fun). Next up will be the Steez Universal Light (6’9” M, 1/8-5/8oz, 4-12lbs line), and possibly the Poison Adrena 6’10” M (same specs as the PU) and Steez 761MML (1/16-3/4oz, 5-12lbs).
Thx for the write-up Drakestar. Sounds like it's a winner if you're able to look past some of the aesthetics.
Last edited by Chode on Sun Nov 26, 2023 6:30 pm, edited 1 time in total.

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Wed Nov 16, 2022 1:14 pm

Chode wrote:
Tue Nov 15, 2022 5:30 pm
Thx for the write-up Drakestar. Sounds like it's a winner of you're able to look past some of the aesthetics.
Objectively it's a winner, yeah. I'm not sure that part came through strongly enough. I have certain preferences and those probably skew my reporting.

KP Duty
Elite Angler
Elite Angler
Posts: 667
Joined: Wed May 06, 2015 5:52 pm

Re: Trika Rods

Post by KP Duty » Thu Nov 24, 2022 9:20 am

Drakestar wrote:
Sun Nov 13, 2022 8:58 pm
I’ve used the 7’0” spinner on 3 1/2 trips now and compared it to a couple other high-end rods: Poison Ultima 6’10” Medium (1/4-3/4oz, 8-16lbs line), NRX+ 852C (1/8-3/oz, 10-14lbs) and NRX 822 DSR (3/16-1/2oz, 6-12lbs). I mention the actual ratings because, even though all rods here are rated Medium (technically the DSR is a “Mag Medium”), there are big differences in what those M rods are supposedly capable of, and how heavy they actually are. (The Trika 7’0” M is rated 1/8-1/2, 6-12lbs btw.)

I did a bunch direct A/B testing (using braid-to-leader on all rods) in the same spots, throwing the same baits every time, i.e. these finesse jigs:

3FB57062-AC91-4D68-A6FA-840DA5F05443.jpeg

I made sure to catch fish on each rod, as well.

So, is that Trika 2x as sensitive as other high-end rods? Of course not ;) It’s not eye-openingly light, either. But it’s definitely holding its own, even against the comparison rods.

Long story short, I like the PU better for jigs and reading bottom, but the Triza transmits more vibration on a blade bait than the PU, possibly because of the carbon weave handle. I like the 822 DSR better for dropshots, as well. But I preferred the Triza over the 852 on finesse jigs and on Ned rigs (was catching them in 20 feet of water on a 1/4oz tungsten head), and the Triza wasn’t a lot worse than the other two high-end rods; I just preferred the PU and DSR. The Trika has impressive sensitivity in my book.

Would I buy another Triza rod? If it had a better reel seat, possibly (would probably get a 6’10” ML or 7’0” ML). It’s not that the seat is uncomfortable (even when touching the IMO oversized Trika logo), but man, it just looks so cheaply made. (See images earlier in the thread.) I’m running an Exists 2000 on this rod and placing that reel’s feet on those plastic seams feels like an insult :lol: I’m also not a big fan of the hook keeper, particularly because the full handle makes it impossible to install another one lower. The taper and power are fine. I don’t find the taper particularly funky, either, feels a bit like Shimano. The finish is barebones but fine. Some of the epoxy work feels sloppy and not up to JDM standards, and the winding check for the handle is some rubber or plastic (it was loose when I got the rod and I had to push it in). But I’ve seen worse on more expensive rods like Kistler.

I have some more rods to test against (well, I don’t have too, but it’s kinda fun). Next up will be the Steez Universal Light (6’9” M, 1/8-5/8oz, 4-12lbs line), and possibly the Poison Adrena 6’10” M (same specs as the PU) and Steez 761MML (1/16-3/4oz, 5-12lbs).
I'd like to see a pic of that new ultima...mainly the lockdown nut. I'm trying to decide whether I need to pick up one of the '16 models while I still can, or just go with a new one. I may end up with both ;).

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Fri Nov 25, 2022 7:42 am

KP Duty wrote:
Thu Nov 24, 2022 9:20 am
I'd like to see a pic of that new ultima...mainly the lockdown nut. I'm trying to decide whether I need to pick up one of the '16 models while I still can, or just go with a new one. I may end up with both ;).
We should probably open a new thread for the rods, but here’s a quick pic.
20895E3D-66AE-468E-B90C-E1F12B7DD380.jpeg
20895E3D-66AE-468E-B90C-E1F12B7DD380.jpeg (88.08 KiB) Viewed 2748 times

KP Duty
Elite Angler
Elite Angler
Posts: 667
Joined: Wed May 06, 2015 5:52 pm

Re: Trika Rods

Post by KP Duty » Sun Nov 27, 2022 7:44 am

Drakestar wrote:
Fri Nov 25, 2022 7:42 am
KP Duty wrote:
Thu Nov 24, 2022 9:20 am
I'd like to see a pic of that new ultima...mainly the lockdown nut. I'm trying to decide whether I need to pick up one of the '16 models while I still can, or just go with a new one. I may end up with both ;).
We should probably open a new thread for the rods, but here’s a quick pic.

20895E3D-66AE-468E-B90C-E1F12B7DD380.jpeg
Thanks!

Stump jumper
Newbie Angler
Newbie Angler
Posts: 7
Joined: Mon Nov 07, 2022 6:31 pm

Re: Trika Rods

Post by Stump jumper » Mon Dec 05, 2022 4:58 pm

FYI that reel seat looks like it’s made out of Toray, just like the Alps MVT seat. The Alps MVT is high end. Seams isn’t an indication of low grade, but they definitely could have been buffed out by the builder that touts a high end rod. Does it feel good? Is it light & rigid (this you wouldn’t necessarily know unless you built the rod)? Does it transmit vibrations well? These are the functional aspects of the seat, but I guess you have to like how it looks too.

dragon1
Pro Angler
Pro Angler
Posts: 10513
Joined: Fri Sep 22, 2006 8:23 am
Location: Murfreesboro TN

Re: Trika Rods

Post by dragon1 » Mon Dec 05, 2022 6:37 pm

Stump jumper wrote:
Mon Dec 05, 2022 4:58 pm
FYI that reel seat looks like it’s made out of Toray, just like the Alps MVT seat. The Alps MVT is high end. Seams isn’t an indication of low grade, but they definitely could have been buffed out by the builder that touts a high end rod. Does it feel good? Is it light & rigid (this you wouldn’t necessarily know unless you built the rod)? Does it transmit vibrations well? These are the functional aspects of the seat, but I guess you have to like how it looks too.
I had a Vinnie custom NFC HM with the Alps MVT and agreed, it's a badass reel seat.
"It is like a finger pointing away to the Moon...don't concentrate on the finger, or you will miss all of that heavenly glory."

User avatar
doomtrprz71
Elite Angler
Elite Angler
Posts: 401
Joined: Tue Jan 14, 2014 4:35 am

Re: Trika Rods

Post by doomtrprz71 » Mon Dec 05, 2022 7:27 pm

I have alps mvt reel seats on 3 of my rods and I agree, the trika reel seat is very similar, just has a shorter trigger, I agree the seam on the trika could be cleaned up better but it's not a big deal to me.

Drakestar
Platinum Angler
Platinum Angler
Posts: 889
Joined: Sun Jan 05, 2020 11:54 am

Re: Trika Rods

Post by Drakestar » Mon Dec 05, 2022 10:10 pm

Stump jumper wrote:
Mon Dec 05, 2022 4:58 pm
FYI that reel seat looks like it’s made out of Toray, just like the Alps MVT seat. The Alps MVT is high end. Seams isn’t an indication of low grade, but they definitely could have been buffed out by the builder that touts a high end rod. Does it feel good? Is it light & rigid (this you wouldn’t necessarily know unless you built the rod)? Does it transmit vibrations well? These are the functional aspects of the seat, but I guess you have to like how it looks too.
You’re probably right, and rereading the TT preview, it mentions a “custom carbon reel seat”. The whole thing just felt cheap and plastic to me and it was an honest reaction.

The casting reel seat feels cleaner than the spinning seat I initially posted - it has some obvious seams at the bottom, but the whole Trika shape and embossed logo look much more polished & refined than the spinning reel seat. So there’s that. Still doesn’t look as high-end as a good Shimano reel seat to me, but it is what it is. I don’t consider myself a form over function guy, but I do like form AND function.
DC5CA48B-0929-4884-BAE1-8E4B704D7461.jpeg
DC5CA48B-0929-4884-BAE1-8E4B704D7461.jpeg (96.83 KiB) Viewed 2429 times
BCBCF491-F2A8-45D3-B740-8282732D4ECE.jpeg
BCBCF491-F2A8-45D3-B740-8282732D4ECE.jpeg (119.52 KiB) Viewed 2429 times
So… wait a second, why do I have a casting reel seat to compare to all of the sudden? Because it was Black Friday and I am weak, that’s why :) And because the reel seat is just one factor but not the whole world. (Still hope they buff it out in the future.)
Last edited by Drakestar on Thu Dec 08, 2022 7:39 am, edited 1 time in total.

Post Reply