Elaztech
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Elaztech
What happened to all the Z Man Elaztech soft baits?
Since Strike King began offering their Elaztech worm, it seems like Z Man has cut way back on their Elaztech line.
And Strike King has a very limited worm line now, too.
Since Strike King began offering their Elaztech worm, it seems like Z Man has cut way back on their Elaztech line.
And Strike King has a very limited worm line now, too.
Re: Elaztech
I'm not aware of any of their products being discontinued? They showed a few new colors and a whole new micro size line of baits during icast this week as well
- doomtrprz71
- Elite Angler
- Posts: 407
- Joined: Tue Jan 14, 2014 4:35 am
Re: Elaztech
They are much bigger in the saltwater world, I barely fish with anything zman in fresh, but I fish a ton of their plastics in the salt. Their thing now in the freshwater world seems to be geared more towards ned rigging.
Re: Elaztech
I've been a Z-Man staffer for 10+ years. Not paid, but not a 40 percenter. I'm not a gifted promoter, but I dam sure like to talk baits.
Z-Man has always made the Elaztec baits for Strike King, even before putting their own brand on them. They've discontinued a few of my favorite models and colors over the years, but seem to keep expanding the lineup. HellaCrawZ and SMH Worm are two recent ones I recall. Definitely a lot of variations in the Ned rig too. As oops mentioned, the panfish line has been requested for quite a few years, and those came out at ICAST.
Curious what baits you're not seeing, Marc?
Z-Man has always made the Elaztec baits for Strike King, even before putting their own brand on them. They've discontinued a few of my favorite models and colors over the years, but seem to keep expanding the lineup. HellaCrawZ and SMH Worm are two recent ones I recall. Definitely a lot of variations in the Ned rig too. As oops mentioned, the panfish line has been requested for quite a few years, and those came out at ICAST.
Curious what baits you're not seeing, Marc?
Re: Elaztech
This material has been around for years. I used to use terminator snap back plastics in the early 2000s then strike king 3X plastics before Zman used it as their elaztech. There was a number of years where it wasn't on the US market until Zman reintroduced the material. I think the popularity of EWG hooks helped the material finally gain a market hold. Anyways, I like the stuff too and it's not going anywhere.
I used to be amazed by this material because it made the softest baits with the most action that also would float while being the most durable material possible. They would react and melt other baits and also had issues with hook penetration because the material would stretch around the hook point rather than let it pierce it. The Zman material has salt in it that let's hook points pass through which was a game changer. Glad to see this stuff finally get established on the market.
http://www.anglerguide.com/articles/536.html
I used to be amazed by this material because it made the softest baits with the most action that also would float while being the most durable material possible. They would react and melt other baits and also had issues with hook penetration because the material would stretch around the hook point rather than let it pierce it. The Zman material has salt in it that let's hook points pass through which was a game changer. Glad to see this stuff finally get established on the market.
http://www.anglerguide.com/articles/536.html
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Elaztech
I seem to remember, back when Zman first started their Elaztech baits, they had a 6-7 inch straight worm. I remember that worm was what they used to show how stretchy Elaztech was. I finally wanted to try them, but now I can't find them.eyra_kid wrote: ↑Tue Jul 26, 2022 11:55 amI've been a Z-Man staffer for 10+ years. Not paid, but not a 40 percenter. I'm not a gifted promoter, but I dam sure like to talk baits.
Z-Man has always made the Elaztec baits for Strike King, even before putting their own brand on them. They've discontinued a few of my favorite models and colors over the years, but seem to keep expanding the lineup. HellaCrawZ and SMH Worm are two recent ones I recall. Definitely a lot of variations in the Ned rig too. As oops mentioned, the panfish line has been requested for quite a few years, and those came out at ICAST.
Curious what baits you're not seeing, Marc?
Re: Elaztech
They are still available. They offer a 4" and a 7" version. Different profile. https://zmanfishing.com/store/categorie ... rmz/size:1mark poulson wrote: ↑Wed Jul 27, 2022 10:18 amI seem to remember, back when Zman first started their Elaztech baits, they had a 6-7 inch straight worm. I remember that worm was what they used to show how stretchy Elaztech was. I finally wanted to try them, but now I can't find them.eyra_kid wrote: ↑Tue Jul 26, 2022 11:55 amI've been a Z-Man staffer for 10+ years. Not paid, but not a 40 percenter. I'm not a gifted promoter, but I dam sure like to talk baits.
Z-Man has always made the Elaztec baits for Strike King, even before putting their own brand on them. They've discontinued a few of my favorite models and colors over the years, but seem to keep expanding the lineup. HellaCrawZ and SMH Worm are two recent ones I recall. Definitely a lot of variations in the Ned rig too. As oops mentioned, the panfish line has been requested for quite a few years, and those came out at ICAST.
Curious what baits you're not seeing, Marc?
https://www.tacklewarehouse.com/Z-Man_F ... ANFNW.html
-
- TT Pro Angler
- Posts: 2746
- Joined: Thu Dec 20, 2007 6:28 am
- Location: NorCal
Re: Elaztech
Thank you.eyra_kid wrote: ↑Tue Aug 02, 2022 9:33 amThey are still available. They offer a 4" and a 7" version. Different profile. https://zmanfishing.com/store/categorie ... rmz/size:1mark poulson wrote: ↑Wed Jul 27, 2022 10:18 amI seem to remember, back when Zman first started their Elaztech baits, they had a 6-7 inch straight worm. I remember that worm was what they used to show how stretchy Elaztech was. I finally wanted to try them, but now I can't find them.eyra_kid wrote: ↑Tue Jul 26, 2022 11:55 amI've been a Z-Man staffer for 10+ years. Not paid, but not a 40 percenter. I'm not a gifted promoter, but I dam sure like to talk baits.
Z-Man has always made the Elaztec baits for Strike King, even before putting their own brand on them. They've discontinued a few of my favorite models and colors over the years, but seem to keep expanding the lineup. HellaCrawZ and SMH Worm are two recent ones I recall. Definitely a lot of variations in the Ned rig too. As oops mentioned, the panfish line has been requested for quite a few years, and those came out at ICAST.
Curious what baits you're not seeing, Marc?
https://www.tacklewarehouse.com/Z-Man_F ... ANFNW.html