NFC X-ray 6100-1 DSR
NFC X-ray 6100-1 DSR
I don’t know if anyone has noticed yet but NFC just added the 6100-1 Drop shot blank to their X-ray lineup a couple weeks ago. It’s listed with all the same specs as the Nrx 822 DSR: 3/16 - 1/2oz Mag-Medium. I ordered two right when they went up and can’t wait to build them out. For comparisons sake I’m going to build the first blank using the same guide layout/ components as the Nrx 822 DSR, and then I’m going to build the second blank with Fuji Torzites and a carbon skinned foam core Tennessee grip. First off I want to see how these blanks compare to the almighty 822 DSR. Second I want to see if the guide layout found on the Nrx is actually more sensitive than the Fuji Torzites. I have heard a lot of mixed opinions on whether the recoil guides found on the Nrx make the rod more sensitive.The 822 is one of my favorite rods so hopefully these blanks do not disappoint
-
- Elite Angler
- Posts: 692
- Joined: Fri Oct 06, 2006 7:38 pm
- Location: San Diego, CA
Re: NFC X-ray 6100-1 DSR
Did you order an LMX or HMx? Their description at the top is of the HMx, but the options for ordering only show LMX.
Re: NFC X-ray 6100-1 DSR
I ordered the X-Ray LMX. I don’t see any description that says HMx, it just says “DS 6100-1(X-Ray LMX)”
Re: NFC X-ray 6100-1 DSR
I just got the blanks in yesterday. I can already tell these are going to make some amazing drop shot rods. I haven’t taken any measurements yet but I compared them side by side of my Nrx 822 DSR and the action is almost spot on. Now I just have to find the time to build them up
Re: NFC X-ray 6100-1 DSR
I have one on the way too... can't decide if I should build it out as a casting or spinning rod though
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
-
- Senior Angler
- Posts: 73
- Joined: Sun Apr 02, 2017 10:56 pm
- Location: Missouri
Re: NFC X-ray 6100-1 DSR
I would suggest building one of each and see which you find to be the more effective tool
Re: NFC X-ray 6100-1 DSR
only one blank to work with so it's an either or situationmobass11652 wrote: ↑Fri Jan 22, 2021 10:52 amI would suggest building one of each and see which you find to be the more effective tool
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
Re: NFC X-ray 6100-1 DSR
But if you're only getting one of an expensive good thing, how will I know that I'm still on TackleTour?Cal wrote: ↑Fri Jan 22, 2021 10:57 amonly one blank to work with so it's an either or situationmobass11652 wrote: ↑Fri Jan 22, 2021 10:52 amI would suggest building one of each and see which you find to be the more effective tool
If this goes up straight against the NRX 822 DSR I'll definitely interested in how it compares when dropshotting. Hoping you stress-test that application even if it ends up being a BC.
Re: NFC X-ray 6100-1 DSR
The OP can make the NRX comparison, not I... I don't have the DSR822S NRX... i prefer the DSR820 and that's only available in GLX
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
-
- Senior Angler
- Posts: 73
- Joined: Sun Apr 02, 2017 10:56 pm
- Location: Missouri
Re: NFC X-ray 6100-1 DSR
Cal I am saying build 2 rods. A caster and a spinner both utilizing the same model blank as the base of the build.
Re: NFC X-ray 6100-1 DSR
And I am saying I only purchased one blank so it is an either or situation.mobass11652 wrote: ↑Fri Jan 22, 2021 6:05 pmCal I am saying build 2 rods. A caster and a spinner both utilizing the same model blank as the base of the build.
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"
-
- TT Moderator
- Posts: 6804
- Joined: Mon Feb 28, 2011 1:56 pm
- Location: Oxford GA
Re: NFC X-ray 6100-1 DSR
I think he wants you to buy a 2nd blank lol!Cal wrote: ↑Fri Jan 22, 2021 6:11 pmAnd I am saying I only purchased one blank so it is an either or situation.mobass11652 wrote: ↑Fri Jan 22, 2021 6:05 pmCal I am saying build 2 rods. A caster and a spinner both utilizing the same model blank as the base of the build.
But srsly, make it a casting rod. I'm interested to see how that stacks up for dropshot and light neko rigs.
Try not to let your mind wander. It is much too small to be outside unsupervised.
Re: NFC X-ray 6100-1 DSR
I’ve tried dropshotting with a casting rod and could never really get used to it What reel seat and guides are you planning on using?
I just ordered all the guides and components for my builds. I already have some custom carbon fiber skinned foam core Tennessee grips so I will be using those
Re: NFC X-ray 6100-1 DSR
Please post your results, I'll be following this thread as well! Thanks!
Re: NFC X-ray 6100-1 DSR
Undecided... blank just arrived today. I'll unpack it tomorrow and start the slow process of deciding what I want to do with it.
I drop shot and ned rig with casting rods all the time, but if it doesn't work for you, it doesn't work for you
Cal, Managing Editor
"fish with mindfulness : beware the darkside"
"fish with mindfulness : beware the darkside"