SLX XT

Reels are the hottest topic for TackleTour. Everyone wants to know what the latest and greatest is and how they compare to the old guard. What's the best for light stuff, or what's your suggestion for heavy cover. Do we really need different retrieve ratios? It's all in here.
Post Reply
DChiWildcats
Senior Angler
Senior Angler
Posts: 154
Joined: Sat Mar 24, 2012 8:38 pm

SLX XT

Post by DChiWildcats » Tue Jul 28, 2020 10:37 am

Looking for opinions on the Shimano SLX XT. Quality, durability, performance for a budget reel? How would it up for punching heavy mats? How’s the drag? Let me know your thoughts.

Slazmo
Pro Angler
Pro Angler
Posts: 1513
Joined: Fri May 08, 2015 11:43 pm
Location: Gold Coast, Queensland. Australia

Re: SLX XT

Post by Slazmo » Tue Jul 28, 2020 1:54 pm

From a service point of view its a very honest all round reel, overall build quality is there - can't fault it, I did sell the garden variety SLX I had (didn't like the unpainted raw feel of the plastic at all) .

If you wanted you could change out the solid and material fibre drag washers - however I lapped the drag washer and the drag performs as should, did some big runs up my 20 meter backyard and didn't find any real loss of performance.

Pics of my reel out of the box. Was actually well lubed apart from a few minor areas.
IMG_20200729_065444.jpg
1 - XT
IMG_20200729_065444.jpg (50.32 KiB) Viewed 6335 times
IMG_20200729_065527.jpg
2 - Gearbox
IMG_20200729_065527.jpg (63.16 KiB) Viewed 6335 times
IMG_20200729_065545.jpg
3 - Gears close up
IMG_20200729_065545.jpg (64.89 KiB) Viewed 6335 times
IMG_20200729_065606.jpg
4 - Drag washer
IMG_20200729_065606.jpg (71.27 KiB) Viewed 6335 times
IMG_20200729_065626.jpg
5 - Salad
IMG_20200729_065626.jpg (97.57 KiB) Viewed 6335 times
As an out of the box option its excellent value, I put a bearing in the level wind, shimmed the knobs and left the bushings in them. Don't forget the SLX MGL too.

brownhl
Elite Angler
Elite Angler
Posts: 389
Joined: Wed Jan 05, 2005 9:39 am
Location: Cherry Hill, VA

Re: SLX XT

Post by brownhl » Fri Jul 31, 2020 9:27 am

I bought the SLX XG and pepped it up with Hedgehog SS half open spool bearings, put a bearing on the drive shaft and swapped the drag discs with Carbon Tex (used the Curado XG Carbon Tex). Sweet little reel now.

mthao105
Senior Angler
Senior Angler
Posts: 102
Joined: Sat Feb 04, 2012 12:55 pm

Re: SLX XT

Post by mthao105 » Sat Aug 01, 2020 11:37 pm

Looks like a solid reel. May have to pick up one for bank beating trips.

User avatar
bwjay
Elite Angler
Elite Angler
Posts: 236
Joined: Mon Jun 17, 2019 9:40 am
Location: Minnesota

Re: SLX XT

Post by bwjay » Sun Aug 02, 2020 6:17 pm

You shouldn't have to mod a reel right out of the box. My SLX XT XG was good at first but I did something to make it geary and loud. Maybe it's just dirty. It's quite noisy on the cast (sort of buzzing like I hear from cheaper reels on YouTube). I will probably try some compressed air on it everywhere I can without disassembling it. Makes me love my Bantams more, that's for sure!

Slazmo
Pro Angler
Pro Angler
Posts: 1513
Joined: Fri May 08, 2015 11:43 pm
Location: Gold Coast, Queensland. Australia

Re: SLX XT

Post by Slazmo » Sun Aug 02, 2020 6:20 pm

Compressed air... Do yourself a favour and get it looked at, than pushing stuff further in and into other areas.

User avatar
bwjay
Elite Angler
Elite Angler
Posts: 236
Joined: Mon Jun 17, 2019 9:40 am
Location: Minnesota

Re: SLX XT

Post by bwjay » Mon Aug 03, 2020 9:15 am

Slazmo wrote:
Sun Aug 02, 2020 6:20 pm
Compressed air... Do yourself a favour and get it looked at, than pushing stuff further in and into other areas.
Honestly I don't think it's worth time and money to get it looked at. I don't use it much. Good call on the compressed air though, it is a pretty tight area so it likely won't expel anything. Anyway, thought I'd offer my experience.

kaiser
Angler
Angler
Posts: 28
Joined: Fri Mar 16, 2018 9:04 pm

Re: SLX XT

Post by kaiser » Fri Feb 26, 2021 8:44 pm

I got the XT in 6.3 and use it for deeper cranks and swimbaits in the 1/2oz-1oz range. Definitely punches above its price range, I've been quite happy with it. Bought the SLX MGL spool from a member for ~45 shipped and definitely want to use it more this upcoming spring. The casting capabilities remind me of the 50e.

User avatar
Drew03cmc
Elite Angler
Elite Angler
Posts: 273
Joined: Wed Jun 18, 2014 1:34 am
Location: Overland Park, KS

Re: SLX XT

Post by Drew03cmc » Sat Feb 27, 2021 4:31 pm

I have 2, an XG and an HG. I really like them for what they are. One is on my frog rod and it does the job great. The next is for my general purpose MH rod, chatterbaits, spinnerbaits, buzzbaits, Ploppers, etc. It's really a nice reel for the price.
Andy

DChiWildcats
Senior Angler
Senior Angler
Posts: 154
Joined: Sat Mar 24, 2012 8:38 pm

Re: SLX XT

Post by DChiWildcats » Wed Mar 03, 2021 7:52 pm

I bought 8 of them. For what you get for the price it can’t be beat. To me I like the 150 size better than the 200 and they honestly perform every bit as well as a Curado to me. I fish a lot of tournaments and am not the nicest to my gear and these things can take a beat. Will be getting more.

User avatar
arrowslinger1
Elite Angler
Elite Angler
Posts: 513
Joined: Sun Feb 27, 2011 8:15 am

Re: SLX XT

Post by arrowslinger1 » Thu Mar 04, 2021 7:34 pm

I mod all my reels before I use them. I put a bearing anywhere one can go. Bantams, metaniums, stradics. Why wouldn’t someone max them out is my question? Slx xt with the five bearings added makes a nice little reel.

Slazmo
Pro Angler
Pro Angler
Posts: 1513
Joined: Fri May 08, 2015 11:43 pm
Location: Gold Coast, Queensland. Australia

Re: SLX XT

Post by Slazmo » Sat May 29, 2021 2:16 am

The SLX XT has been discontinued here and selling for $100... Yet the garden variety SLX and DC remain...

Not sure if it was filling in a gap, but for $100 it's a great buy.

Can't even bother getting the BFS - just bought another XT.
Attachments
Screenshot_20210528-164449.jpg
Screenshot_20210528-164449.jpg (36.98 KiB) Viewed 4396 times

SSS
Platinum Angler
Platinum Angler
Posts: 1379
Joined: Thu Jul 13, 2017 5:38 pm

Re: SLX XT

Post by SSS » Sat May 29, 2021 6:17 am

arrowslinger1 wrote:
Thu Mar 04, 2021 7:34 pm
I mod all my reels before I use them. I put a bearing anywhere one can go. Bantams, metaniums, stradics. Why wouldn’t someone max them out is my question? Slx xt with the five bearings added makes a nice little reel.
Same here. Absolutely no reason no to make your reel as good as it can be for the hundreds or thousands of hours you'll be using it.

Post Reply